BesEmcConstruction Class Reference

#include <BesEmcConstruction.hh>

Inheritance diagram for BesEmcConstruction:

Public Member Functions
	BesEmcConstruction ()
	~BesEmcConstruction ()
void	SetVerboseLevel (G4int val)
void	SetCrystalMaterial (G4String)
void	SetCasingMaterial (G4String)
void	SetCasingThickness (G4ThreeVector)
void	SetBSCRmin (G4double)
void	SetBSCNbPhi (G4int)
void	SetBSCNbTheta (G4int)
void	SetStartIDTheta (G4int)
void	SetBSCCrystalLength (G4double)
void	SetBSCYFront0 (G4double)
void	SetBSCYFront (G4double)
void	SetBSCPosition0 (G4double)
void	SetBSCPosition1 (G4double)
void	SetMagField (G4double)
void	Construct (G4LogicalVolume *)
void	UpdateGeometry ()
void	ThreeVectorTrans (G4ThreeVector fPnt[8], double x[8], double y[8], double z[8])
void	TransformToArb8 (const G4ThreeVector fPnt[8], G4ThreeVector newfPnt[8], G4ThreeVector &center, G4ThreeVector &rotAngle)
Hep3Vector	RotAngleFromNewZ (Hep3Vector newZ)
void	PrintEMCParameters ()
G4int	GetVerboseLevel ()
G4double	GetMagField ()
G4int	GetStartIDTheta ()
G4Material *	GetCrystalMaterial ()
G4Material *	GetCasingMaterial ()
const G4VPhysicalVolume *	GetEMC ()
const G4VPhysicalVolume *	GetBSCPhi ()
const G4VPhysicalVolume *	GetBSCTheta ()
const G4VPhysicalVolume *	GetBSCCrystal ()
const G4VPVParameterisation *	GetCrystalParam ()
void	ConstructSPFrame (G4LogicalVolume *, BesEmcGeometry *)
void	ConstructEndGeometry (G4LogicalVolume *)
void	GetLogicalVolume ()
void	SetVisAndSD ()
G4int	ComputeEndCopyNb (G4int)
	BesEmcConstruction ()
	~BesEmcConstruction ()
void	SetVerboseLevel (G4int val)
void	SetCrystalMaterial (G4String)
void	SetCasingMaterial (G4String)
void	SetCasingThickness (G4ThreeVector)
void	SetBSCRmin (G4double)
void	SetBSCNbPhi (G4int)
void	SetBSCNbTheta (G4int)
void	SetStartIDTheta (G4int)
void	SetBSCCrystalLength (G4double)
void	SetBSCYFront0 (G4double)
void	SetBSCYFront (G4double)
void	SetBSCPosition0 (G4double)
void	SetBSCPosition1 (G4double)
void	SetMagField (G4double)
void	Construct (G4LogicalVolume *)
void	UpdateGeometry ()
void	ThreeVectorTrans (G4ThreeVector fPnt[8], double x[8], double y[8], double z[8])
void	TransformToArb8 (const G4ThreeVector fPnt[8], G4ThreeVector newfPnt[8], G4ThreeVector &center, G4ThreeVector &rotAngle)
Hep3Vector	RotAngleFromNewZ (Hep3Vector newZ)
void	PrintEMCParameters ()
G4int	GetVerboseLevel ()
G4double	GetMagField ()
G4int	GetStartIDTheta ()
G4Material *	GetCrystalMaterial ()
G4Material *	GetCasingMaterial ()
const G4VPhysicalVolume *	GetEMC ()
const G4VPhysicalVolume *	GetBSCPhi ()
const G4VPhysicalVolume *	GetBSCTheta ()
const G4VPhysicalVolume *	GetBSCCrystal ()
const G4VPVParameterisation *	GetCrystalParam ()
void	ConstructSPFrame (G4LogicalVolume *, BesEmcGeometry *)
void	ConstructEndGeometry (G4LogicalVolume *)
void	GetLogicalVolume ()
void	SetVisAndSD ()
G4int	ComputeEndCopyNb (G4int)
Public Member Functions inherited from BesSubdetector
	BesSubdetector ()
virtual	~BesSubdetector ()
virtual void	Construct (G4LogicalVolume *bes)=0
G4LogicalVolume *	FindLogicalVolume (const G4String &vn)
	BesSubdetector ()
virtual	~BesSubdetector ()
virtual void	Construct (G4LogicalVolume *bes)=0
G4LogicalVolume *	FindLogicalVolume (const G4String &vn)

Static Public Member Functions
static BesEmcConstruction *	GetBesEmcConstruction ()
static BesEmcConstruction *	GetBesEmcConstruction ()

Additional Inherited Members
Protected Attributes inherited from BesSubdetector
SAXProcessor	m_sxp
ProcessingConfigurator	m_config

Detailed Description

Definition at line 52 of file InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh.

Constructor & Destructor Documentation

BesEmcConstruction() [1/2]

BesEmcConstruction::BesEmcConstruction

(

)

Definition at line 57 of file BesEmcConstruction.cc.

  :verboseLevel(0),
   solidEMC(0),logicEMC(0),physiEMC(0),logicBSCWorld(0),
   solidBSCPhi(0),logicBSCPhi(0),physiBSCPhi(0),
   solidBSCTheta(0),logicBSCTheta(0),physiBSCTheta(0),
   solidBSCCrystal(0),logicBSCCrystal(0),physiBSCCrystal(0),
   magField(0),detectorMessenger(0),besEMCSD(0),crystalParam(0),
   logicEnd(0),logicEndPhi(0),logicEndCasing(0),logicEndCrystal(0),
   logicRear(0),logicRearCasing(0),logicOrgGlass(0),logicPD(0),
   logicAlPlate(0),logicPreAmpBox(0),logicAirInPABox(0),
   logicHangingPlate(0),logicOCGirder(0),logicCable(0),logicWaterPipe(0),
   logicSupportBar(0),logicSupportBar1(0),logicEndRing(0),logicGear(0),
   logicTaperRing1(0),logicTaperRing2(0),logicTaperRing3(0)
{
  if(fBesEmcConstruction)
    { G4Exception("BesEmcConstruction constructed twice."); }
  fBesEmcConstruction=this;
  //for debug
  //  G4Exception("BesEmcConstruction::BesEmcConstruction() starting........");
  startID           = 1;
  phiNbCrystals     = 0;
  thetaNbCrystals   = 0;
  besEMCGeometry = new BesEmcGeometry();
  emcEnd = new BesEmcEndGeometry();
}

~BesEmcConstruction() [1/2]

BesEmcConstruction::~BesEmcConstruction

(

)

Definition at line 83 of file BesEmcConstruction.cc.

{
  if(detectorMessenger) delete detectorMessenger;
  if(crystalParam) delete crystalParam;
  if(besEMCGeometry) delete besEMCGeometry;
  if(emcEnd) delete emcEnd;
  
  BesEmcParameter::Kill();
}

BesEmcConstruction() [2/2]

BesEmcConstruction::BesEmcConstruction

(

)

~BesEmcConstruction() [2/2]

BesEmcConstruction::~BesEmcConstruction

(

)

Member Function Documentation

ComputeEndCopyNb() [1/2]

G4int BesEmcConstruction::ComputeEndCopyNb

(

G4int

num

)

Definition at line 1230 of file BesEmcConstruction.cc.

{
  G4int copyNb;
  switch(num){
    case 30:
      copyNb = 5;
      break;
    case 31:
      copyNb = 6;
      break;
    case 32:
      copyNb = 14;
      break;
    case 33:
      copyNb = 15;
      break;
    case 34:
      copyNb = 16;
      break;
    default:
      copyNb = num;
      break;
  }
  return copyNb;
}

ComputeEndCopyNb() [2/2]

G4int BesEmcConstruction::ComputeEndCopyNb

(

G4int

)

Construct() [1/2]

void BesEmcConstruction::Construct ( G4LogicalVolume *  logicBes )

virtual

Implements BesSubdetector.

Definition at line 93 of file BesEmcConstruction.cc.

{
  besEMCGeometry->ComputeEMCParameters();
  detectorMessenger = new BesEmcDetectorMessenger(this,besEMCGeometry);
  emcEnd->ComputeParameters();
 
  G4SDManager* SDman = G4SDManager::GetSDMpointer();
  if (!besEMCSD) {
    besEMCSD = new BesEmcSD("CalorSD",this,besEMCGeometry);
    SDman->AddNewDetector( besEMCSD );
  }
 
  // Construction
  G4cout<<"--------ReadBoostRoot::GetEmc()="<<ReadBoostRoot::GetEmc()<<G4endl;
  if(ReadBoostRoot::GetEmc()==2)
  {
    logicEMC = EmcG4Geo::Instance()->GetTopVolume();
 
    if(logicEMC){
      physiEMC = new G4PVPlacement(0,
          G4ThreeVector(0.0 ,0.0 ,0.0),
          logicEMC, "physicalEMC",logicBes, false, 0);
      G4cout<<"logicEmc:  ===  "<<logicEMC<<"  physiEmc "<<physiEMC<<G4endl;
 
      GetLogicalVolume();
      SetVisAndSD();
    }
  }
  else {
    //for debug
    //  G4Exception("BesEmcConstruction::Construct() starting............");
    //
    DefineMaterials();
    phiNbCrystals     = (*besEMCGeometry).BSCNbPhi;
    thetaNbCrystals   = (*besEMCGeometry).BSCNbTheta*2;
 
    G4double da=0.001*deg;  //delta angle to avoid overlap
    
    //
    //BSC
    //
    solidBSC = new G4Tubs("solidBSC",
      (*besEMCGeometry).TaperRingRmin1,
      (*besEMCGeometry).BSCRmax+(*besEMCGeometry).SPBarThickness+(*besEMCGeometry).SPBarThickness1+2.1*mm,   //radius from 942mm to 940 mm
      (*besEMCGeometry).BSCDz+(*besEMCGeometry).TaperRingThickness3+(*besEMCGeometry).EndRingDz,
            0.*deg,
            360.*deg);
 
    solidESC = new G4Cons("solidESC",(*emcEnd).WorldRmin1,(*emcEnd).WorldRmax1,
        (*emcEnd).WorldRmin2,(*emcEnd).WorldRmax2,
        (*emcEnd).WorldDz/2,0.*deg,360.*deg);
 
    solidEMC = new G4UnionSolid("solidEMC0",
        solidBSC,
        solidESC,
        0,
        G4ThreeVector(0,0,(*emcEnd).WorldZPosition));
    
    G4RotationMatrix *rotateESC = new G4RotationMatrix();
    rotateESC->rotateY(180.*deg);
    
    solidEMC = new G4UnionSolid("solidEMC",
        solidEMC,
        solidESC,
        rotateESC,
        G4ThreeVector(0,0,-(*emcEnd).WorldZPosition));
    
    logicEMC = new G4LogicalVolume(solidEMC,
             G4Material::GetMaterial("Air"),
             "logicalEMC");
    
    physiEMC = new G4PVPlacement(0,
        0,
        logicEMC,
        "physicalEMC",
        logicBes,
        false,
        0);
 
    solidBSCWorld = new G4SubtractionSolid("solidBSCWorld0",
          solidBSC,
          solidESC,
          0,
          G4ThreeVector(0,0,(*emcEnd).WorldZPosition));
 
    solidBSCWorld = new G4SubtractionSolid("solidBSCWorld",
        solidBSCWorld,
        solidESC,
        rotateESC,
        G4ThreeVector(0,0,-(*emcEnd).WorldZPosition));
 
    logicBSCWorld = new G4LogicalVolume(solidBSCWorld,
        G4Material::GetMaterial("Air"),
        "logicalBSCWorld");
 
    G4RotationMatrix *rotBSC = new G4RotationMatrix();
    rotBSC->rotateY(180.*deg);
    physiBSCWorld = new G4PVPlacement(rotBSC,
        0,
        logicBSCWorld,
        "physicalBSCWorld",
        logicEMC,
        false,
        0);
    
    G4RotationMatrix *rotateMatrix[200];
    G4double oOp,ox,oy,oz; 
    G4double delta = 0*deg;
    G4ThreeVector axis = G4ThreeVector(0,0,0);
    oOp=(*besEMCGeometry).BSCRmin/sin(0.5*(*besEMCGeometry).BSCPhiDphi+90*deg)
      *sin((*besEMCGeometry).BSCAngleRotat);
    G4double ll=(*besEMCGeometry).BSCCryLength;
    G4double rr=(*besEMCGeometry).BSCRmin;
    G4double oj=sqrt(ll*ll+rr*rr-2*ll*rr*cos(180.*deg-(*besEMCGeometry).BSCAngleRotat));
    G4double oij=90.*deg-(*besEMCGeometry).BSCPhiDphi/2.-(*besEMCGeometry).BSCAngleRotat;
    G4double doj=asin(sin(180.*deg-(*besEMCGeometry).BSCAngleRotat)/oj*ll);
    G4double ioj=(*besEMCGeometry).BSCPhiDphi/2.+doj;
    G4double ij=oj/sin(oij)*sin(ioj);
    G4double dOp=rr/sin(90.*deg-(*besEMCGeometry).BSCPhiDphi/2.)
      *sin(90.*deg+(*besEMCGeometry).BSCPhiDphi/2.-(*besEMCGeometry).BSCAngleRotat);
    G4double cOp=rr/sin(90.*deg+(*besEMCGeometry).BSCPhiDphi/2.)
      *sin(90.*deg-(*besEMCGeometry).BSCPhiDphi/2.-(*besEMCGeometry).BSCAngleRotat);
    G4double ch=(dOp+ll)/cos((*besEMCGeometry).BSCPhiDphi)-cOp;
    G4double hi=(dOp+ll)*tan((*besEMCGeometry).BSCPhiDphi)-ij;
    G4double oh=sqrt(ch*ch+rr*rr-2*ch*rr*cos(180*deg-(*besEMCGeometry).BSCAngleRotat));
    G4double hoi=asin(sin(180*deg-oij)/oh*hi);
    G4double dok=asin(sin(180*deg-(*besEMCGeometry).BSCAngleRotat)/oh*ch);
    if(verboseLevel>3)
      G4cout << "oj=" <<oj/cm<<G4endl
        << "oij="<<oij/deg<<G4endl
        << "doj="<<doj/deg<<G4endl
        << "ioj="<<ioj/deg<<G4endl
        << "ij="<<ij/cm<<G4endl
        << "dOp="<<dOp/cm<<G4endl
        << "cOp="<<cOp/cm<<G4endl
        << "ch="<<ch/cm<<G4endl
        << "hi="<<hi/cm<<G4endl
        << "oh="<<oh/cm<<G4endl
        << "hoi="<<hoi/deg<<G4endl
        << "dok="<<dok/deg<<G4endl;
 
    // Phi Cell
    solidBSCPhiTub = new G4Tubs(
        "solidBSCPhiTub",
        dOp,
        (*besEMCGeometry).BSCPhiRmax,
        (*besEMCGeometry).BSCDz,
        360.*deg-(*besEMCGeometry).BSCPhiDphi,
        (*besEMCGeometry).BSCPhiDphi);
    solidConsPhi = new G4Cons("consPhi1",
        (*besEMCGeometry).BSCRmin1,
        (*besEMCGeometry).BSCRmax1,
        (*besEMCGeometry).BSCRmin2,
        (*besEMCGeometry).BSCRmax2,
        (*besEMCGeometry).BSCDz1/2,
        0.*deg,
        360.*deg);
    solidBSCPhi1 = new G4SubtractionSolid("solidBSCPhi1",
        solidBSCPhiTub,
        solidConsPhi,
        0,
        G4ThreeVector(0,0,(*besEMCGeometry).BSCDz-(*besEMCGeometry).BSCDz1/2));
    solidConsPhi = new G4Cons("consPhi2",
        (*besEMCGeometry).BSCRmin2,
        (*besEMCGeometry).BSCRmax2,
        (*besEMCGeometry).BSCRmin1,
        (*besEMCGeometry).BSCRmax1,
        (*besEMCGeometry).BSCDz1/2,
        0.*deg,
        360.*deg);
    solidBSCPhi = new G4SubtractionSolid("solidBSCPhi",
        solidBSCPhi1,
        solidConsPhi,
        0,
        G4ThreeVector(0,0,(*besEMCGeometry).BSCDz1/2-(*besEMCGeometry).BSCDz));
 
    logicBSCPhi = new G4LogicalVolume(solidBSCPhi,
        G4Material::GetMaterial("Air"),
        "logicalBSCPhi");
 
    G4int i;
    for(G4int j=0;j<(*besEMCGeometry).BSCNbPhi;j++)  //=============
    {
      if(j<(*besEMCGeometry).BSCNbPhi/2) {  //0~59
        i=(*besEMCGeometry).BSCNbPhi/2-j-1;
      } else {  //60~119
        i=(*besEMCGeometry).BSCNbPhi*3/2-j-1;
      }
      rotateMatrix[i] = new G4RotationMatrix();
      rotateMatrix[i]->rotateZ(-i*(*besEMCGeometry).BSCPhiDphi
          -(*besEMCGeometry).BSCAngleRotat
          -(*besEMCGeometry).BSCPhiDphi/2.
          -hoi);
      rotateMatrix[i]->getAngleAxis(delta, axis);
      //G4cout << "The axis of crystals in the world system is: "
      //   << delta/deg << "(deg)(delta) "
      //<< axis  << "(Z axis)"<< G4endl;
      ox=oOp*cos(-90.*deg+(*besEMCGeometry).BSCAngleRotat+hoi
          +i*(*besEMCGeometry).BSCPhiDphi);
      oy=oOp*sin(-90.*deg+(*besEMCGeometry).BSCAngleRotat+hoi
          +i*(*besEMCGeometry).BSCPhiDphi);
      oz=0*cm;
 
      ostringstream strPhi;
      strPhi << "physicalBSCPhi"  << j;
 
      physiBSCPhi = new G4PVPlacement(rotateMatrix[i],
          G4ThreeVector(ox,oy,oz),
          logicBSCPhi,
          strPhi.str(),
          logicBSCWorld,
          false,
          j);
      //G4cout << G4ThreeVector(ox/cm,oy/cm,oz/cm) <<"(cm)" << G4endl
      //   << (-(*besEMCGeometry).BSCAngleRotat+(i-1)*(*besEMCGeometry).BSCPhiDphi)/deg <<"(degree)" << G4endl;
    }
 
    //
    //Crystals
    //
    G4double zHalfLength[50];
    G4double thetaAxis[50];
    G4double phiAxis[50];
    G4double yHalfLength1[50];
    G4double xHalfLength2[50];
    G4double xHalfLength1[50];
    G4double tanAlpha1[50];
    G4double yHalfLength2[50];
    G4double xHalfLength4[50];
    G4double xHalfLength3[50];
    G4double tanAlpha2[50];
    G4double xPosition[50];
    G4double yPosition[50];
    G4double zPosition[50];
    G4double thetaPosition[50];
    for(i=0;i<(*besEMCGeometry).BSCNbTheta;i++)
    {
      zHalfLength[i]  = (*besEMCGeometry).zHalfLength[i];
      thetaAxis[i]    = (*besEMCGeometry).thetaAxis[i];
      phiAxis[i]      = (*besEMCGeometry).phiAxis[i];
      yHalfLength1[i] = (*besEMCGeometry).yHalfLength1[i];
      xHalfLength2[i] = (*besEMCGeometry).xHalfLength2[i];
      xHalfLength1[i] = (*besEMCGeometry).xHalfLength1[i];
      tanAlpha1[i]    = (*besEMCGeometry).tanAlpha1[i];
      yHalfLength2[i] = (*besEMCGeometry).yHalfLength2[i];
      xHalfLength4[i] = (*besEMCGeometry).xHalfLength4[i];
      xHalfLength3[i] = (*besEMCGeometry).xHalfLength3[i];
      tanAlpha2[i]    = (*besEMCGeometry).tanAlpha2[i];
      xPosition[i]    = (*besEMCGeometry).xPosition[i];
      yPosition[i]    = (*besEMCGeometry).yPosition[i];
      zPosition[i]    = (*besEMCGeometry).zPosition[i];
      thetaPosition[i]= (*besEMCGeometry).thetaPosition[i];
      if(verboseLevel>4)    
        G4cout << "The sizes of the "<<i+1<<" crystal are:" << G4endl
          <<"zHalfLength ="<<zHalfLength[i]/cm<< "(cm)," << G4endl
          << "thetaAxis  ="<<thetaAxis[i]/deg << "(deg),"<< G4endl
          << "phiAxis    ="<< phiAxis[i]/deg  << "(deg),"<< G4endl
          << "yHalfLength1="<<yHalfLength1[i]/cm<<"(cm),"<< G4endl
          << "xHalfLength1="<<xHalfLength1[i]/cm<<"(cm),"<< G4endl
          << "xHalfLength2="<<xHalfLength2[i]/cm<<"(cm),"<< G4endl
          << "tanAlpha1   ="<< tanAlpha1[i]              << G4endl
          << "yHalfLength2="<<yHalfLength2[i]/cm<<"(cm),"<< G4endl
          << "xHalfLength3="<<xHalfLength3[i]/cm<<"(cm),"<< G4endl
          << "xHalfLength4="<<xHalfLength4[i]/cm<<"(cm),"<< G4endl
          << "tanAlpha2   =" << tanAlpha2[i]    << "."   << G4endl;
    }
    besEMCGeometry->ModifyForCasing();
 
    solidBSCCrystal = new G4Trap("solidCrystal",
        100*cm, 100*deg, 100*deg,
        100*cm, 100*cm,  100*cm,  100*deg,
        100*cm, 100*cm,  100*cm,  100*deg);
 
    logicBSCCrystal = new G4LogicalVolume(solidBSCCrystal,
        fCrystalMaterial,
        "logicalCrystal");
 
    crystalParam = new BesCrystalParameterisation
      (startID,
       thetaNbCrystals,
       (*besEMCGeometry).BSCNbTheta*2,
       besEMCGeometry,
       verboseLevel);
 
    //---------------------------------------------------------------------------------
    //rear substance
    solidRear = new G4Box("solidRearBox",
        (*besEMCGeometry).rearBoxLength/2,
        (*besEMCGeometry).rearBoxLength/2,
        (*besEMCGeometry).rearBoxDz/2);
 
    logicRear = new G4LogicalVolume(solidRear,
        G4Material::GetMaterial("Air"),
        "logicalRearBox");
 
    //organic glass
    solidOrgGlass = new G4Box("solidOrganicGlass",
        (*besEMCGeometry).orgGlassLengthX/2,
        (*besEMCGeometry).orgGlassLengthY/2,
        (*besEMCGeometry).orgGlassLengthZ/2);
 
    logicOrgGlass = new G4LogicalVolume(solidOrgGlass,
        organicGlass,
        "logicalOrganicGlass");
 
    physiOrgGlass = new G4PVPlacement(0,
        G4ThreeVector(0,0,-((*besEMCGeometry).rearBoxDz-(*besEMCGeometry).orgGlassLengthZ)/2),
        logicOrgGlass,
        "physicalOrganicGlass",
        logicRear,
        false,
        0);
 
    //casing
    solidCasingBox = new G4Box("solidCasingBox",
        (*besEMCGeometry).rearBoxLength/2,
        (*besEMCGeometry).rearBoxLength/2,
        (*besEMCGeometry).rearCasingThickness/2);
 
    solidAirHole = new G4Box("solidAirHole",
        (*besEMCGeometry).orgGlassLengthX/2,
        (*besEMCGeometry).orgGlassLengthY/2,
        (*besEMCGeometry).rearBoxDz/2);      //any value more than casing thickness
 
    solidRearCasing = new G4SubtractionSolid("solidRearCasing",
        solidCasingBox,
        solidAirHole,
        0,
        0);
 
    logicRearCasing = new G4LogicalVolume(solidRearCasing,
        rearCasingMaterial,
        "logicalRearCasing");
 
    physiRearCasing = new G4PVPlacement(0,
        G4ThreeVector(0,0,-((*besEMCGeometry).rearBoxDz-(*besEMCGeometry).rearCasingThickness)/2),
        logicRearCasing,
        "physicalRearCasing",
        logicRear,
        false,
        0);
 
    //Al Plate
    solidAlBox = new G4Box("solidAlBox",
        (*besEMCGeometry).rearBoxLength/2,
        (*besEMCGeometry).rearBoxLength/2,
        (*besEMCGeometry).AlPlateDz/2);
 
    solidAlPlate = new G4SubtractionSolid("solidAlPlate",
        solidAlBox,
        solidAirHole,
        0,
        0);
 
    logicAlPlate = new G4LogicalVolume(solidAlPlate,
        G4Material::GetMaterial("Aluminium"),
        "logicalAlPlate");
 
    physiAlPlate = new G4PVPlacement(0,
        G4ThreeVector(0,0,-((*besEMCGeometry).rearBoxDz/2
            -(*besEMCGeometry).rearCasingThickness
            -(*besEMCGeometry).AlPlateDz/2)),
        logicAlPlate,
        "physicalAlPlate",
        logicRear,
        false,
        0);
 
    //photodiode
    solidPD = new G4Box("solidPD",
        (*besEMCGeometry).PDLengthX,     //two PD
        (*besEMCGeometry).PDLengthY/2,
        (*besEMCGeometry).PDLengthZ/2);
 
    logicPD = new G4LogicalVolume(solidPD,
        G4Material::GetMaterial("M_Silicon"),
        "logicalPD");
 
    physiPD = new G4PVPlacement(0,
        G4ThreeVector(0,0,-((*besEMCGeometry).rearBoxDz/2
            -(*besEMCGeometry).orgGlassLengthZ
            -(*besEMCGeometry).PDLengthZ/2)),
        logicPD,
        "physicalPD",
        logicRear,
        false,
        0);
 
    //preamplifier box
    solidPreAmpBox = new G4Box("solidPreAmpBox",
        (*besEMCGeometry).rearBoxLength/2,
        (*besEMCGeometry).rearBoxLength/2,
        (*besEMCGeometry).PABoxDz/2);
 
    logicPreAmpBox = new G4LogicalVolume(solidPreAmpBox,
        G4Material::GetMaterial("Aluminium"),
        "logicalPreAmpBox");
 
    physiPreAmpBox = new G4PVPlacement(0,
        G4ThreeVector(0,0,-((*besEMCGeometry).rearBoxDz/2
            -(*besEMCGeometry).rearCasingThickness
            -(*besEMCGeometry).AlPlateDz
            -(*besEMCGeometry).PABoxDz/2)),
        logicPreAmpBox,
        "physicalPreAmpBox",
        logicRear,
        false,
        0);
 
    //air in preamplifier box
    solidAirInPABox = new G4Box("solidAirInPABox",
        (*besEMCGeometry).rearBoxLength/2-(*besEMCGeometry).PABoxThickness,
        (*besEMCGeometry).rearBoxLength/2-(*besEMCGeometry).PABoxThickness,
        (*besEMCGeometry).PABoxDz/2-(*besEMCGeometry).PABoxThickness);
 
    logicAirInPABox = new G4LogicalVolume(solidAirInPABox,
        G4Material::GetMaterial("Air"),
        "logicalAirInPABox");
 
    physiAirInPABox = new G4PVPlacement(0,
        0,
        logicAirInPABox,
        "physicalAirInPABox",
        logicPreAmpBox,
        false,
        0);
 
    //stainless steel for hanging the crystal
    solidHangingPlate = new G4Box("solidHangingPlate",
        (*besEMCGeometry).rearBoxLength/2,
        (*besEMCGeometry).rearBoxLength/2,
        (*besEMCGeometry).HangingPlateDz/2);
 
    logicHangingPlate = new G4LogicalVolume(solidHangingPlate,stainlessSteel,"logicalHangingPlate");
 
    physiHangingPlate = new G4PVPlacement(0,
        G4ThreeVector(0,0,-((*besEMCGeometry).rearBoxDz/2
            -(*besEMCGeometry).rearCasingThickness
            -(*besEMCGeometry).AlPlateDz
            -(*besEMCGeometry).PABoxDz
            -(*besEMCGeometry).HangingPlateDz/2)),
        logicHangingPlate,
        "physicalHangingPlate",
        logicRear,
        false,
        0);
 
    //water pipe
    solidWaterPipe = new G4Tubs("solidWaterPipe",
        0,
        (*besEMCGeometry).waterPipeDr,
        (*besEMCGeometry).BSCDz,
        0.*deg,
        360.*deg);
 
    logicWaterPipe = new G4LogicalVolume(solidWaterPipe,waterPipe,"logicalWaterPipe");
 
    physiWaterPipe = new G4PVPlacement(0,
        G4ThreeVector((*besEMCGeometry).cablePosX[0]-2*(*besEMCGeometry).cableDr,
          (*besEMCGeometry).cablePosY[0]-(*besEMCGeometry).cableDr-(*besEMCGeometry).waterPipeDr,
          0),
        logicWaterPipe,
        "physicalWaterPipe",
        logicBSCPhi,
        false,
        0);
    //---------------------------------------------------------------------------------
 
 
    //
    //Theta Cell
    //
    G4String nameCrystalAndCasing="CrystalAndCasing";
 
    G4int id=0;     //ID of crystals after distinguishing left and right
    for(i=startID;i<=thetaNbCrystals;i++) //================
    {
      ostringstream strSolidCasing;
      strSolidCasing << "solidBSCCasing"  << i-1;
      ostringstream strVolumeCasing;
      strVolumeCasing << "logicalBSCCasing"  << i-1;
      ostringstream strPhysiCasing;
      strPhysiCasing << "physicalBSCCasing"  << i-1;
 
      if(i>(*besEMCGeometry).BSCNbTheta)
      {
        id=i-(*besEMCGeometry).BSCNbTheta-1;
        solidBSCTheta = new G4Trap(strSolidCasing.str(),
            zHalfLength[id],
            thetaAxis[id],
            -phiAxis[id],
            yHalfLength1[id],
            xHalfLength2[id],
            xHalfLength1[id],
            -tanAlpha1[id],
            yHalfLength2[id],
            xHalfLength4[id],
            xHalfLength3[id],
            -tanAlpha2[id]);
 
        //G4cout<<"in EmcConstr1: "<<strSolidCasing.str()<<" x1="<<xHalfLength1[id]<<" y1="<<yHalfLength1[id]<<" theta="<<thetaAxis[id]
        //<<" phi="<<-phiAxis[id]<<" a1="<<-tanAlpha1[id]<<G4endl;
 
        logicBSCTheta = new G4LogicalVolume(solidBSCTheta,
            fCasingMaterial,
            strVolumeCasing.str());
 
        rotateMatrix[(*besEMCGeometry).BSCNbPhi+i-1] = new G4RotationMatrix();
        rotateMatrix[(*besEMCGeometry).BSCNbPhi+i-1]->rotateZ(-90*deg);
        rotateMatrix[(*besEMCGeometry).BSCNbPhi+i-1]
          ->rotateX(-thetaPosition[id]);
 
 
        physiBSCTheta = 
          new G4PVPlacement(rotateMatrix[(*besEMCGeometry).BSCNbPhi+i-1],
              G4ThreeVector(xPosition[id],
                yPosition[id],
                zPosition[id]),
              strPhysiCasing.str(),
              logicBSCTheta,
              physiBSCPhi,
              false,
              i-1);
 
        if(logicBSCTheta)
        {
          G4VisAttributes* rightVisAtt= new G4VisAttributes(G4Colour(1.0,0.,0.));
          rightVisAtt->SetVisibility(true);
          logicBSCTheta->SetVisAttributes(rightVisAtt);
          logicBSCTheta->SetVisAttributes(G4VisAttributes::Invisible);
        }
 
        ostringstream strRear;
        strRear << "physicalRearBox_1_"  << i-1;
 
        physiRear = new G4PVPlacement(rotateMatrix[(*besEMCGeometry).BSCNbPhi+i-1],
            G4ThreeVector((*besEMCGeometry).rearBoxPosX[id],
              (*besEMCGeometry).rearBoxPosY[id],
              (*besEMCGeometry).rearBoxPosZ[id]),
            strRear.str(),
            logicRear,
            physiBSCPhi,
            false,
            i-1);
 
        ostringstream strGirder;
        strGirder << "solidOpenningCutGirder_1_"  << i-1;
        solidOCGirder = new G4Cons(strGirder.str(),
            (*besEMCGeometry).OCGirderRmin1[id],
            (*besEMCGeometry).BSCPhiRmax,
            (*besEMCGeometry).OCGirderRmin2[id],
            (*besEMCGeometry).BSCPhiRmax,
            (*besEMCGeometry).OCGirderDz[id]/2,
            360.*deg-(*besEMCGeometry).OCGirderAngle/2,
            (*besEMCGeometry).OCGirderAngle/2-da);
 
        ostringstream strVGirder;
        strVGirder << "logicalOpenningCutGirder_1_"  << i-1;
        logicOCGirder = new G4LogicalVolume(solidOCGirder,stainlessSteel,strVGirder.str());
        logicOCGirder->SetVisAttributes(G4VisAttributes::Invisible);
 
        ostringstream strPGirder;
        strPGirder << "physicalOpenningCutGirder_1_"  << i-1;
        physiOCGirder = new G4PVPlacement(0,
            G4ThreeVector(0,0,(*besEMCGeometry).OCGirderPosZ[id]),
            logicOCGirder,
            strPGirder.str(),
            logicBSCPhi,
            false,
            0);
 
        if(id<(*besEMCGeometry).BSCNbTheta-1)
        {
          G4double zLength = (*besEMCGeometry).OCGirderPosZ[id+1]
            -(*besEMCGeometry).OCGirderPosZ[id]
            -(*besEMCGeometry).OCGirderDz[id+1]/2-(*besEMCGeometry).OCGirderDz[id]/2;
          G4double zPosition = (*besEMCGeometry).OCGirderPosZ[id+1]
            -(*besEMCGeometry).OCGirderDz[id+1]/2-zLength/2;
 
          ostringstream strGirder2;
          strGirder2 << "solidOpenningCutGirder_2_"  << i-1;
          solidOCGirder = new G4Cons(strGirder2.str(),
              (*besEMCGeometry).OCGirderRmin2[id],
              (*besEMCGeometry).BSCPhiRmax,
              (*besEMCGeometry).OCGirderRmin1[id+1],
              (*besEMCGeometry).BSCPhiRmax,
              zLength/2,
              360.*deg-(*besEMCGeometry).OCGirderAngle/2,
              (*besEMCGeometry).OCGirderAngle/2-da);
 
          ostringstream strVGirder2;
          strVGirder2 << "logicalOpenningCutGirder_2_"  << i-1;
          logicOCGirder = new G4LogicalVolume(solidOCGirder,stainlessSteel,strVGirder2.str());
          logicOCGirder->SetVisAttributes(G4VisAttributes::Invisible);
 
          ostringstream strPGirder2;
          strPGirder2 << "physicalOpenningCutGirder_2_"  << i-1;
          physiOCGirder = new G4PVPlacement(0,
              G4ThreeVector(0,0,zPosition),
              logicOCGirder,
              strPGirder2.str(),
              logicBSCPhi,
              false,
              0);
        } 
 
        ostringstream strBSCCable;
        strBSCCable << "solidBSCCable_1_"  << i-1;
        solidCable = new G4Tubs(strBSCCable.str(),
            0,
            (*besEMCGeometry).cableDr,
            (*besEMCGeometry).cableLength[id]/2,
            0.*deg,
            360.*deg);
 
        ostringstream strVBSCCable;
        strVBSCCable << "logicalBSCCable_1_"  << i-1;
        logicCable = new G4LogicalVolume(solidCable,cable,strVBSCCable.str());
 
        ostringstream strPBSCCable;
        strPBSCCable << "physicalBSCCable_1_"  << i-1;
        physiCable = new G4PVPlacement(0,
            G4ThreeVector((*besEMCGeometry).cablePosX[id],
              (*besEMCGeometry).cablePosY[id],
              (*besEMCGeometry).cablePosZ[id]),
            logicCable,
            strPBSCCable.str(),
            logicBSCPhi,
            false,
            0);
        logicCable->SetVisAttributes(G4VisAttributes::Invisible);
      }
      else
      {
        id=(*besEMCGeometry).BSCNbTheta-i;
        solidBSCTheta = new G4Trap(strSolidCasing.str(),
            zHalfLength[id],
            thetaAxis[id],
            phiAxis[id],
            yHalfLength1[id],
            xHalfLength1[id],
            xHalfLength2[id],
            tanAlpha1[id],
            yHalfLength2[id],
            xHalfLength3[id],
            xHalfLength4[id],
            tanAlpha2[id]);
 
        //      G4cout<<"in EmcConstr2: "<<strSolidCasing.str()<<" x1="<<xHalfLength1[id]<<" y1="<<yHalfLength1[id]<<" theta="<<thetaAxis[id]
        //        <<" phi="<<phiAxis[id]<<" a1="<<tanAlpha1[id]<<G4endl;
 
        logicBSCTheta = new G4LogicalVolume(solidBSCTheta,
            fCasingMaterial,
            strVolumeCasing.str());
 
        rotateMatrix[(*besEMCGeometry).BSCNbPhi+i-1] = new G4RotationMatrix();
        rotateMatrix[(*besEMCGeometry).BSCNbPhi+i-1]->rotateZ(-90*deg);
        rotateMatrix[(*besEMCGeometry).BSCNbPhi+i-1]
          ->rotateX(-180*deg+thetaPosition[id]);
        physiBSCTheta = 
          new G4PVPlacement(rotateMatrix[(*besEMCGeometry).BSCNbPhi+i-1],
              G4ThreeVector(xPosition[id],
                yPosition[id],
                -zPosition[id]),
              strPhysiCasing.str(),
              logicBSCTheta,
              physiBSCPhi,
              false,
              i-1);
        if(logicBSCTheta)
        {
          G4VisAttributes* rightVisAtt= new G4VisAttributes(G4Colour(1.0,0.,0.));
          rightVisAtt->SetVisibility(true);
          logicBSCTheta->SetVisAttributes(rightVisAtt);
          logicBSCTheta->SetVisAttributes(G4VisAttributes::Invisible);
        }
 
        ostringstream strRear;
        strRear << "physicalRearBox_2_"  << i-1;
 
        physiRear = new G4PVPlacement(rotateMatrix[(*besEMCGeometry).BSCNbPhi+i-1],
            G4ThreeVector((*besEMCGeometry).rearBoxPosX[id],
              (*besEMCGeometry).rearBoxPosY[id],
              -(*besEMCGeometry).rearBoxPosZ[id]),
            strRear.str(),
            logicRear,
            physiBSCPhi,
            false,
            i-1);
 
        ostringstream strGirder;
        strGirder << "solidOpenningCutGirder_3_"  << i-1;
        solidOCGirder = new G4Cons(strGirder.str(),
            (*besEMCGeometry).OCGirderRmin2[id],
            (*besEMCGeometry).BSCPhiRmax,
            (*besEMCGeometry).OCGirderRmin1[id],
            (*besEMCGeometry).BSCPhiRmax,
            (*besEMCGeometry).OCGirderDz[id]/2,
            360.*deg-(*besEMCGeometry).OCGirderAngle/2,
            (*besEMCGeometry).OCGirderAngle/2-da);
 
        ostringstream strVGirder;
        strVGirder << "logicalOpenningCutGirder_3_"  << i-1;
        logicOCGirder = new G4LogicalVolume(solidOCGirder,stainlessSteel,strVGirder.str());
        logicOCGirder->SetVisAttributes(G4VisAttributes::Invisible);
 
        ostringstream strPGirder;
        strPGirder << "physicalOpenningCutGirder_3_"  << i-1;
        physiOCGirder = new G4PVPlacement(0,
            G4ThreeVector(0,0,-(*besEMCGeometry).OCGirderPosZ[id]),
            logicOCGirder,
            strPGirder.str(),
            logicBSCPhi,
            false,
            0);
 
        if(id<(*besEMCGeometry).BSCNbTheta-1)
        {
          G4double zLength = (*besEMCGeometry).OCGirderPosZ[id+1]-(*besEMCGeometry).OCGirderPosZ[id]
            -(*besEMCGeometry).OCGirderDz[id+1]/2-(*besEMCGeometry).OCGirderDz[id]/2;
          G4double zPosition = (*besEMCGeometry).OCGirderPosZ[id+1]-(*besEMCGeometry).OCGirderDz[id+1]/2-zLength/2;
 
          ostringstream strGirder2;
          strGirder2 << "solidOpenningCutGirder_4_"  << i-1;
          solidOCGirder = new G4Cons(strGirder2.str(),
              (*besEMCGeometry).OCGirderRmin1[id+1],
              (*besEMCGeometry).BSCPhiRmax,
              (*besEMCGeometry).OCGirderRmin2[id],
              (*besEMCGeometry).BSCPhiRmax,
              zLength/2,
              360.*deg-(*besEMCGeometry).OCGirderAngle/2,
              (*besEMCGeometry).OCGirderAngle/2-da);
 
          ostringstream strVGirder2;
          strVGirder2 << "logicalOpenningCutGirder_4_"  << i-1;
          logicOCGirder 
            = new G4LogicalVolume(solidOCGirder,stainlessSteel,strVGirder2.str());
          logicOCGirder->SetVisAttributes(G4VisAttributes::Invisible);
 
          ostringstream strPGirder2;
          strPGirder2 << "physicalOpenningCutGirder_4_"  << i-1;
          physiOCGirder = new G4PVPlacement(0,
              G4ThreeVector(0,0,-zPosition),
              logicOCGirder,
              strPGirder2.str(),
              logicBSCPhi,
              false,
              0);
        }
 
        ostringstream strBSCCable;
        strBSCCable << "solidBSCCable_2_"  << i-1;
        solidCable = new G4Tubs(strBSCCable.str(),
            0,
            (*besEMCGeometry).cableDr,
            (*besEMCGeometry).cableLength[id]/2,
            0.*deg,
            360.*deg);
 
        ostringstream strVBSCCable;
        strVBSCCable << "logicalBSCCable_2_"  << i-1;
        logicCable = new G4LogicalVolume(solidCable,cable,strVBSCCable.str());
 
        ostringstream strPBSCCable;
        strPBSCCable << "physicalBSCCable_2_"  << i-1;
        physiCable = new G4PVPlacement(0,
            G4ThreeVector((*besEMCGeometry).cablePosX[id],
              (*besEMCGeometry).cablePosY[id],
              -(*besEMCGeometry).cablePosZ[id]),
            logicCable,
            strPBSCCable.str(),
            logicBSCPhi,
            false,
            0);
        logicCable->SetVisAttributes(G4VisAttributes::Invisible);
 
      }
 
      ostringstream strCrystal;
      strCrystal << "physicalCrystal"  << i-1;
      physiBSCCrystal = new G4PVParameterised(
          strCrystal.str(),
          logicBSCCrystal,
          physiBSCTheta,
          kZAxis,
          1,//for this method,it must be 1.
          crystalParam);
      (*besEMCGeometry).physiBSCCrystal[i]=physiBSCCrystal;
      //G4cout << (*besEMCGeometry).physiBSCCrystal[i] << G4endl;
      physiBSCCrystal->SetCopyNo(i);
 
 
      if(verboseLevel>4)
        G4cout << "BesEmcConstruction*****************************"<< G4endl
          << "point of crystal =" <<physiBSCCrystal << G4endl
          //           << "point of mother  =" <<physiBSCCrystal->GetMotherPhysical() << G4endl
          << "point of excepted=" <<physiBSCTheta << G4endl;
      //G4Exception("BesEMCConstruction::Construct() starting............");
    }
 
    //
    //always return the physical World
    //
    if(verboseLevel>0)PrintEMCParameters();
    //  return physiBSC;
 
    ConstructSPFrame(logicBSCWorld,besEMCGeometry);
    ConstructEndGeometry(logicEMC);
  }
 
  //Set vis attributes and sensitive detector 
  SetVisAndSD();
 
  //list geo tree
  if(logicEMC&&physiEMC&&verboseLevel>4){
    G4cout<<"logicEmc "<<logicEMC<<"  physiEmc "<<physiEMC<<G4endl;
    G4cout<<"list geo tree"<<G4endl;
 
    int NdaughterofEMC = logicEMC->GetNoDaughters();
 
    for(int i = 0; i < NdaughterofEMC; i++)
    {
      G4LogicalVolume *daughterofEmc = logicEMC->GetDaughter(i)->GetLogicalVolume();
      G4cout<<i<<"/"<<NdaughterofEMC<<" name: "<<daughterofEmc->GetName()<<" "<<daughterofEmc<<" shape: "<<daughterofEmc->GetSolid()->GetName()<<G4endl;
      int NdaughterofEmc_2 = daughterofEmc->GetNoDaughters();
      for(int j = 0; j < NdaughterofEmc_2; j++)
      {
        G4LogicalVolume *daughterofEmc_2 = daughterofEmc->GetDaughter(j)->GetLogicalVolume();
        G4cout<<"     --> "<<j<<"/"<<NdaughterofEmc_2<<" name: "<<daughterofEmc_2->GetName()<<" "<<daughterofEmc_2<<" shape: "<<daughterofEmc_2->GetSolid()->GetName()<<G4endl;
        int NdaughterofEmc_3 = daughterofEmc_2->GetNoDaughters();
        for(int k = 0; k < NdaughterofEmc_3; k++)
        {
          G4LogicalVolume *daughterofEmc_3 = daughterofEmc_2->GetDaughter(k)->GetLogicalVolume();
          G4cout<<"          --> "<<k<<"/"<<NdaughterofEmc_3<<" name: "<<daughterofEmc_3->GetName()<<" "<<daughterofEmc_3<<" shape: "<<daughterofEmc_3->GetSolid()->GetName()<<G4endl;
          int NdaughterofEmc_4 = daughterofEmc_3->GetNoDaughters();
          for(int m = 0; m < NdaughterofEmc_4; m++)
          {
            G4LogicalVolume *daughterofEmc_4 = daughterofEmc_3->GetDaughter(m)->GetLogicalVolume();
            G4cout<<"               --> "<<m<<"/"<<NdaughterofEmc_4<<" name: "<<daughterofEmc_4->GetName()<<" "<<daughterofEmc_4<<" shape: "<<daughterofEmc_4->GetSolid()->GetName()<<G4endl; 
            if(daughterofEmc_3->GetSolid()->GetName().contains("solidBSCCasing"))
            {
              G4Trap *Crystal = (G4Trap *)daughterofEmc_3->GetSolid();
              double hz = Crystal->GetZHalfLength();
              double hx1 = Crystal->GetXHalfLength1();
              double hx2 = Crystal->GetXHalfLength2();
              double hx3 = Crystal->GetXHalfLength3();
              double hx4 = Crystal->GetXHalfLength4();
              double hy1 = Crystal->GetYHalfLength1();
              double hy2 = Crystal->GetYHalfLength2();
              double tanalpha1 = Crystal->GetTanAlpha1();
              double tanalpha2 = Crystal->GetTanAlpha2();
              G4cout<<"                   --> "<<hx1<<" "<<hx2<<" "<<hx3<<" "<<hx4<<" "<<hy1<<" "<<hy2<<" "<<hz<<" "<<tanalpha1<<" "<<tanalpha2<<G4endl;
 
            }//if(SolidCrystal)
          }//4
        }//3
      }//2
    }//1
  }
 
 
}

Referenced by BesDetectorConstruction::Construct().

Construct() [2/2]

void BesEmcConstruction::Construct ( G4LogicalVolume *  )

virtual

Implements BesSubdetector.

ConstructEndGeometry() [1/2]

void BesEmcConstruction::ConstructEndGeometry

(

G4LogicalVolume *

logicEMC

)

Definition at line 956 of file BesEmcConstruction.cc.

{
  G4Material* fCrystalMaterial = G4Material::GetMaterial("Cesiumiodide");
  G4VisAttributes* crystalVisAtt= new G4VisAttributes(G4Colour(0.5,0,1.0));
  crystalVisAtt->SetVisibility(false);
  G4VisAttributes* endPhiVisAtt= new G4VisAttributes(G4Colour(0,1.0,0));
  endPhiVisAtt->SetVisibility(false);
  const G4double zoomConst = 0.995;
  const G4double da=0.001*deg;
 
  //world volume of endcap
  //east end
  solidEnd = new G4Cons("solidEndWorld",(*emcEnd).WorldRmin1,(*emcEnd).WorldRmax1,
      (*emcEnd).WorldRmin2,(*emcEnd).WorldRmax2,
      (*emcEnd).WorldDz/2,0.*deg,360.*deg);
  logicEnd = new G4LogicalVolume(solidEnd, G4Material::GetMaterial("Aluminium"), "logicalEndWorld", 0, 0, 0);
  physiEnd = new G4PVPlacement(0,               // no rotation
      G4ThreeVector(0,0,(*emcEnd).WorldZPosition),
      logicEnd,               // its logical volume
      "physicalEndWorld0",             // its name
      logicEMC,               // its mother  volume
      false,                  // no boolean operations
      0);                     // no field specific to volume
  if(logicEnd)
    logicEnd->SetVisAttributes(G4VisAttributes::Invisible);
 
 
  //west end
  G4RotationMatrix *rotateEnd = new G4RotationMatrix();
  rotateEnd->rotateY(180.*deg);
  physiEnd = new G4PVPlacement(rotateEnd,
      G4ThreeVector(0,0,-(*emcEnd).WorldZPosition),
      logicEnd,
      "physicalEndWorld2",
      logicEMC,
      false,
      2);
 
  ////////////////////////////////////////////////////////////////////////
  // emc endcap sectors (east)                                            //
  //////////////////////////////////////////////////////////////////////////
  //                                    20mm gap                          // 
  //                                      ||                              //
  //                                \   7 || 6   /                        //
  //                           -   8 \    ||    / 5   -                   //
  //                             -    \   ||   /    -                     //
  //                        _  9   -   \  ||  /   -   4  _                //
  //                          - _    -  \ || /  -    _ -                  //
  //                              - _  - \||/ -  _ -                      //
  //                         10        - -||- -         3                 //
  //                      ----------------||----------------              //
  //                         11        - -||- -         2                 //
  //                              _ -  - /||\ -  - _                      //
  //                          _ -    -  / || \  -    - _                  //
  //                        -  12  -   /  ||  \   -   1  -                //
  //                             -    /   ||   \    -                     //
  //                           -  13 /    ||    \  0  -                   //
  //                                /  14 || 15  \                        //
  //                                      ||                              //
  ////////////////////////////////////////////////////////////////////////
 
  // 1/16 of endcap world,which has some symmetry
  // sector 0-6,8-14
  solidEndPhi = new G4Cons("solidEndPhi0",
      (*emcEnd).SectorRmin1,(*emcEnd).SectorRmax1,(*emcEnd).SectorRmin2,(*emcEnd).SectorRmax2,
      (*emcEnd).SectorDz/2,0.*deg,22.5*deg-da);
  logicEndPhi = new G4LogicalVolume(solidEndPhi, G4Material::GetMaterial("Air"), "logicalEndPhi0", 0, 0, 0);
  for(G4int i=0;i<14;i++)
  {
    if((i!=6)&&(i!=7))
    {
      G4RotationMatrix *rotatePhi = new G4RotationMatrix();
      rotatePhi->rotateZ(-i*22.5*deg+67.5*deg);
      ostringstream strEndPhi;
      strEndPhi << "physicalEndPhi"  << i;
      physiEndPhi = new G4PVPlacement(rotatePhi,//0,logicEndPhi,strEndPhi.str(),logicEnd,false,i);
          G4ThreeVector(0,0,(*emcEnd).SectorZPosition),logicEndPhi,strEndPhi.str(),logicEnd,false,i);
    }
  }
  if(logicEndPhi)
    logicEndPhi->SetVisAttributes(endPhiVisAtt);
 
  for(G4int i=0;i<35;i++)
  {
    ostringstream strEndCasing;
    strEndCasing << "solidEndCasing_0_"  << i;
 
    //-************tranform to new coodinate!    liangyt 2007.5.7  *******
    G4ThreeVector newfPnt[8];
    G4ThreeVector center(0.0, 0.0, 0.0);
    G4ThreeVector rotAngle(0.0, 0.0, 0.0);
 
    TransformToArb8( (*emcEnd).fPnt[i], newfPnt, center, rotAngle );
 
    emcEnd->Zoom(newfPnt,zoomConst);    //change emcEnd.fPnt[i] to newfPnt
 
    G4RotationMatrix *rotatePhiIrregBox = new G4RotationMatrix();
    rotatePhiIrregBox->rotateX(rotAngle.x());
    rotatePhiIrregBox->rotateY(rotAngle.y());
    rotatePhiIrregBox->rotateZ(rotAngle.z());
    //-*******************************************************************
 
    solidEndCasing = new G4IrregBox(strEndCasing.str(),(*emcEnd).zoomPoint);   //liangyt
 
    ostringstream strVEndCasing;
    strVEndCasing << "logicalEndCasing_0_"  << i;
    logicEndCasing = new G4LogicalVolume(solidEndCasing,fCasingMaterial,strVEndCasing.str());
 
    ostringstream strPEndCasing;
    strPEndCasing << "physicalEndCasing_0_"  << i;
    physiEndCasing = new G4PVPlacement(rotatePhiIrregBox,center,
        logicEndCasing,strPEndCasing.str(),logicEndPhi,false,i);  //change with rot and pos now!
 
    ostringstream strEndCrystal;
    strEndCrystal << "solidEndCrystal_0_"  << i;
 
    emcEnd->ModifyForCasing((*emcEnd).zoomPoint,i);
    solidEndCrystal = new G4IrregBox(strEndCrystal.str(),(*emcEnd).cryPoint);
 
    ostringstream strVEndCrystal;
    strVEndCrystal << "logicalEndCrystal_0_"  << i;
    logicEndCrystal = new G4LogicalVolume(solidEndCrystal,fCrystalMaterial,strVEndCrystal.str());
 
    ostringstream strPEndCrystal;
    strPEndCrystal << "physicalEndCrystal_0_"  << i;
    physiEndCrystal = new G4PVPlacement(0,0,logicEndCrystal,strPEndCrystal.str(),logicEndCasing,false,i);
 
    logicEndCasing->SetVisAttributes(G4VisAttributes::Invisible);
    logicEndCrystal->SetVisAttributes(crystalVisAtt);
    logicEndCrystal->SetSensitiveDetector(besEMCSD);
  }
 
  // the top area which has 20 mm gap
  // sector 6,14
  solidEndPhi = new G4Cons("solidEndPhi1",
      (*emcEnd).WorldRmin1,(*emcEnd).WorldRmax1,(*emcEnd).WorldRmin2,(*emcEnd).WorldRmax2,  
      (*emcEnd).WorldDz/2,67.5*deg,22.5*deg-da);
  logicEndPhi = new G4LogicalVolume(solidEndPhi, G4Material::GetMaterial("Air"), "logicalEndPhi1", 0, 0, 0);
  for(G4int i=0;i<2;i++)
  {
    G4RotationMatrix *rotatePhi = new G4RotationMatrix();
    rotatePhi->rotateZ(-i*180.*deg);
    ostringstream strEndPhi;
    strEndPhi << "physicalEndPhi"  << i*8+6;
    physiEndPhi = new G4PVPlacement(rotatePhi,G4ThreeVector(0,0,(*emcEnd).SectorZPosition),
        logicEndPhi,strEndPhi.str(),logicEnd,false,i*8+6);
  }
  if(logicEndPhi)
    logicEndPhi->SetVisAttributes(endPhiVisAtt);
 
  for(G4int i=0;i<35;i++)
  {
    ostringstream strEndCasing;
    strEndCasing << "solidEndCasing_1_"  << i;
 
    //-************tranform to new coodinate!    liangyt 2007.5.7  *******
    G4ThreeVector newfPnt[8];
    G4ThreeVector center(0.0, 0.0, 0.0);
    G4ThreeVector rotAngle(0.0, 0.0, 0.0);
 
    TransformToArb8( (*emcEnd).fPnt1[i], newfPnt, center, rotAngle );
 
    emcEnd->Zoom(newfPnt,zoomConst);    //change emcEnd.fPnt[i] to newfPnt
 
    G4RotationMatrix *rotatePhiIrregBox = new G4RotationMatrix();
    rotatePhiIrregBox->rotateX(rotAngle.x());
    rotatePhiIrregBox->rotateY(rotAngle.y());
    rotatePhiIrregBox->rotateZ(rotAngle.z());
    //-*******************************************************************
 
    solidEndCasing = new G4IrregBox(strEndCasing.str(),(*emcEnd).zoomPoint);
 
    ostringstream strVEndCasing;
    strVEndCasing << "logicalEndCasing_1_"  << i;
    logicEndCasing = new G4LogicalVolume(solidEndCasing,fCasingMaterial,strVEndCasing.str());
 
    ostringstream strPEndCasing;
    strPEndCasing << "physicalEndCasing_1_"  << i;
    physiEndCasing = new G4PVPlacement(rotatePhiIrregBox,center,
        logicEndCasing,strPEndCasing.str(),logicEndPhi,false,i);  //change with rot and pos now!
 
    ostringstream strEndCrystal;
    strEndCrystal << "solidEndCrystal_1_"  << i;
 
    emcEnd->ModifyForCasing((*emcEnd).zoomPoint,i);
    solidEndCrystal = new G4IrregBox(strEndCrystal.str(),(*emcEnd).cryPoint);
 
    ostringstream strVEndCrystal;
    strVEndCrystal << "logicalEndCrystal_1_"  << i;
    logicEndCrystal = new G4LogicalVolume(solidEndCrystal,fCrystalMaterial,strVEndCrystal.str());
 
    ostringstream strPEndCrystal;
    strPEndCrystal << "physicalEndCrystal_1_"  << i;
    physiEndCrystal = new G4PVPlacement(0,0,logicEndCrystal,strPEndCrystal.str(),logicEndCasing,false,i);
 
    logicEndCasing->SetVisAttributes(G4VisAttributes::Invisible);
    logicEndCrystal->SetVisAttributes(crystalVisAtt);
    logicEndCrystal->SetSensitiveDetector(besEMCSD);
  }
 
  (*emcEnd).ReflectX();
 
  // sector 7,15
  for(G4int i=0;i<35;i++)
    for (G4int j=0;j<8;j++)
      (*emcEnd).fPnt1[i][j].rotateZ(-90.*deg);
 
  solidEndPhi = new G4Cons("solidEndPhi2",
      (*emcEnd).WorldRmin1,(*emcEnd).WorldRmax1,(*emcEnd).WorldRmin2,(*emcEnd).WorldRmax2,
      (*emcEnd).WorldDz/2,0*deg,22.5*deg-da);
  logicEndPhi = new G4LogicalVolume(solidEndPhi, G4Material::GetMaterial("Air"), "logicalEndPhi2", 0, 0, 0);
  for(G4int i=0;i<2;i++)
  {
    G4RotationMatrix *rotatePhi = new G4RotationMatrix();
    rotatePhi->rotateZ(-i*180.*deg-90.*deg);
    ostringstream strEndPhi;
    strEndPhi << "physicalEndPhi"  << i*8+7;
    physiEndPhi = new G4PVPlacement(rotatePhi,G4ThreeVector(0,0,(*emcEnd).SectorZPosition),
        logicEndPhi,strEndPhi.str(),logicEnd,false,i*8+7);
  }
  if(logicEndPhi)
    logicEndPhi->SetVisAttributes(endPhiVisAtt);
 
  for(G4int i=0;i<35;i++)
  {
    ostringstream strEndCasing;
    strEndCasing << "solidEndCasing_2_"  << i;
 
    //-************tranform to new coodinate!    liangyt 2007.5.7  *******
    G4ThreeVector newfPnt[8];
    G4ThreeVector center(0.0, 0.0, 0.0);
    G4ThreeVector rotAngle(0.0, 0.0, 0.0);
 
    TransformToArb8( (*emcEnd).fPnt1[i], newfPnt, center, rotAngle );
 
    emcEnd->Zoom(newfPnt,zoomConst);    //change emcEnd.fPnt[i] to newfPnt
 
    G4RotationMatrix *rotatePhiIrregBox = new G4RotationMatrix();
    rotatePhiIrregBox->rotateX(rotAngle.x());
    rotatePhiIrregBox->rotateY(rotAngle.y());
    rotatePhiIrregBox->rotateZ(rotAngle.z());
    //-*******************************************************************
 
    solidEndCasing = new G4IrregBox(strEndCasing.str(),(*emcEnd).zoomPoint);
 
    ostringstream strVEndCasing;
    strVEndCasing << "logicalEndCasing_2_"  << i;
    logicEndCasing = new G4LogicalVolume(solidEndCasing,fCasingMaterial,strVEndCasing.str());
 
    ostringstream strPEndCasing;
    strPEndCasing << "physicalEndCasing_2_"  << i;
    physiEndCasing = new G4PVPlacement(rotatePhiIrregBox,center,
        logicEndCasing,strPEndCasing.str(),logicEndPhi,false,i);  //change with rot and pos now!
 
    ostringstream strEndCrystal;
    strEndCrystal << "solidEndCrystal_2_"  << i;
 
    emcEnd->ModifyForCasing((*emcEnd).zoomPoint,i);
    solidEndCrystal = new G4IrregBox(strEndCrystal.str(),(*emcEnd).cryPoint);
 
    ostringstream strVEndCrystal;
    strVEndCrystal << "logicalEndCrystal_2_"  << i;
    logicEndCrystal = new G4LogicalVolume(solidEndCrystal,fCrystalMaterial,strVEndCrystal.str());
 
    ostringstream strPEndCrystal;
    strPEndCrystal << "physicalEndCrystal_2_"  << i;
    physiEndCrystal = new G4PVPlacement(0,0,logicEndCrystal,strPEndCrystal.str(),logicEndCasing,false,i);
 
    logicEndCasing->SetVisAttributes(G4VisAttributes::Invisible);
    logicEndCrystal->SetVisAttributes(crystalVisAtt);
    logicEndCrystal->SetSensitiveDetector(besEMCSD);
  }
}

Referenced by Construct().

ConstructEndGeometry() [2/2]

void BesEmcConstruction::ConstructEndGeometry

(

G4LogicalVolume *

)

ConstructSPFrame() [1/2]

void BesEmcConstruction::ConstructSPFrame	(	G4LogicalVolume *	logicEMC,
		BesEmcGeometry *	besEMCGeometry
	)

Definition at line 1256 of file BesEmcConstruction.cc.

{
  G4double rmax=(*besEMCGeometry).BSCRmax+2.*mm;  //radius from 942mm to 940mm
  solidSupportBar = new G4Tubs("solidSupportBar0",
      rmax+(*besEMCGeometry).SPBarThickness1,
      rmax+(*besEMCGeometry).SPBarThickness+(*besEMCGeometry).SPBarThickness1,
      (*besEMCGeometry).BSCDz
      +(*besEMCGeometry).TaperRingThickness3+(*besEMCGeometry).EndRingDz,
      0.*deg,
      360.*deg);
 
  logicSupportBar = new G4LogicalVolume(solidSupportBar,stainlessSteel,"logicalSupportBar0");
 
  physiSupportBar = new G4PVPlacement(0,0,logicSupportBar,"physicalSupportBar0",logicEMC,false,0);
 
  solidSupportBar1 = new G4Tubs("solidSupportBar1",
      rmax,
      rmax+(*besEMCGeometry).SPBarThickness1,
      (*besEMCGeometry).BSCDz+(*besEMCGeometry).TaperRingThickness3,
      (*besEMCGeometry).BSCPhiDphi-(*besEMCGeometry).SPBarDphi/2,
      (*besEMCGeometry).SPBarDphi);
 
  logicSupportBar1 = new G4LogicalVolume(solidSupportBar1,stainlessSteel,"logicalSupportBar1");
 
  for(G4int i=0;i<(*besEMCGeometry).BSCNbPhi/2;i++)
  {
    G4RotationMatrix *rotateSPBar = new G4RotationMatrix();
    rotateSPBar->rotateZ((*besEMCGeometry).BSCPhiDphi-i*2*(*besEMCGeometry).BSCPhiDphi);
    ostringstream strSupportBar1;
    strSupportBar1 << "physicalSupportBar1_"  << i;
    physiSupportBar1 = new G4PVPlacement(rotateSPBar,0,
        logicSupportBar1,strSupportBar1.str(),logicEMC,false,0);
  }
 
  //end ring
  solidEndRing = new G4Tubs("solidEndRing",
      (*besEMCGeometry).EndRingRmin,
      (*besEMCGeometry).EndRingRmin+(*besEMCGeometry).EndRingDr/2,
      (*besEMCGeometry).EndRingDz/2,
      0.*deg,
      360.*deg);
 
  solidGear = new G4Tubs("solidGear",
      (*besEMCGeometry).EndRingRmin+(*besEMCGeometry).EndRingDr/2,
      (*besEMCGeometry).EndRingRmin+(*besEMCGeometry).EndRingDr,
      (*besEMCGeometry).EndRingDz/2,
      0.*deg,
      (*besEMCGeometry).BSCPhiDphi);
 
  //taper ring
  solidTaperRing1 = new G4Tubs("solidTaperRing1",
      (*besEMCGeometry).TaperRingRmin1,
      (*besEMCGeometry).TaperRingRmin1+(*besEMCGeometry).TaperRingThickness1,
      (*besEMCGeometry).TaperRingInnerLength/2,
      0.*deg,
      360.*deg);
 
  solidTaperRing2 = new G4Cons("solidTaperRing2",
      (*besEMCGeometry).TaperRingRmin1,
      (*besEMCGeometry).TaperRingRmin1+(*besEMCGeometry).TaperRingDr,
      (*besEMCGeometry).TaperRingRmin2,
      (*besEMCGeometry).TaperRingRmin2+(*besEMCGeometry).TaperRingDr,
      (*besEMCGeometry).TaperRingDz/2,
      0.*deg,
      360.*deg);
 
  solidTaperRing3 = new G4Cons("solidTaperRing3",
      (*besEMCGeometry).BSCRmax2,
      (*besEMCGeometry).BSCRmax2+(*besEMCGeometry).TaperRingOuterLength1,
      (*besEMCGeometry).TaperRingRmin2+(*besEMCGeometry).TaperRingDr,
      (*besEMCGeometry).TaperRingRmin2+(*besEMCGeometry).TaperRingDr+(*besEMCGeometry).TaperRingOuterLength,
      (*besEMCGeometry).TaperRingThickness3/2,
      0.*deg,
      360.*deg);
 
  logicEndRing = new G4LogicalVolume(solidEndRing,stainlessSteel,"logicalEndRing");
  logicGear = new G4LogicalVolume(solidGear,stainlessSteel,"logicalGear");
  logicTaperRing1 = new G4LogicalVolume(solidTaperRing1,stainlessSteel,"logicalTaperRing1");
  logicTaperRing2 = new G4LogicalVolume(solidTaperRing2,stainlessSteel,"logicalTaperRing2");
  logicTaperRing3 = new G4LogicalVolume(solidTaperRing3,stainlessSteel,"logicalTaperRing3");
 
  for(G4int i=0;i<2;i++)
  {
    G4RotationMatrix *rotateSPRing = new G4RotationMatrix();
    G4double zEndRing,z1,z2,z3;
    if(i==0)
    {
      zEndRing = (*besEMCGeometry).BSCDz+(*besEMCGeometry).TaperRingThickness3+(*besEMCGeometry).EndRingDz/2;
      z1 = (*besEMCGeometry).BSCDz+(*besEMCGeometry).TaperRingThickness3
        -(*besEMCGeometry).TaperRingDz-(*besEMCGeometry).TaperRingInnerLength/2;
      z2 = (*besEMCGeometry).BSCDz+(*besEMCGeometry).TaperRingThickness3-(*besEMCGeometry).TaperRingDz/2;
      z3 = (*besEMCGeometry).BSCDz+(*besEMCGeometry).TaperRingThickness3/2;
    }
    else
    {
      rotateSPRing->rotateY(180.*deg);
      zEndRing = -((*besEMCGeometry).BSCDz+(*besEMCGeometry).TaperRingThickness3+(*besEMCGeometry).EndRingDz/2);
      z1 = -((*besEMCGeometry).BSCDz+(*besEMCGeometry).TaperRingThickness3
          -(*besEMCGeometry).TaperRingDz-(*besEMCGeometry).TaperRingInnerLength/2);
      z2 = -((*besEMCGeometry).BSCDz+(*besEMCGeometry).TaperRingThickness3-(*besEMCGeometry).TaperRingDz/2);
      z3 = -((*besEMCGeometry).BSCDz+(*besEMCGeometry).TaperRingThickness3/2);
    }
 
    ostringstream strEndRing;
    strEndRing << "physicalEndRing_"  << i;
    physiEndRing = new G4PVPlacement(rotateSPRing,G4ThreeVector(0,0,zEndRing),
        logicEndRing,strEndRing.str(),logicEMC,false,0);
 
    for(G4int j=0;j<(*besEMCGeometry).BSCNbPhi/2;j++)
    {
      G4RotationMatrix *rotateGear = new G4RotationMatrix();
      rotateGear->rotateZ((*besEMCGeometry).BSCPhiDphi/2-j*2*(*besEMCGeometry).BSCPhiDphi);
 
      ostringstream strGear;
      strGear << "physicalGear_"  << i << "_" <<j;
      physiGear = new G4PVPlacement(rotateGear,G4ThreeVector(0,0,zEndRing),
          logicGear,strGear.str(),logicEMC,false,0);
    }
 
    ostringstream strTaperRing1;
    strTaperRing1 << "physicalTaperRing1_"  << i;
    physiTaperRing1 = new G4PVPlacement(rotateSPRing,G4ThreeVector(0,0,z1),
        logicTaperRing1,strTaperRing1.str(),logicEMC,false,0);
 
    ostringstream strTaperRing2;
    strTaperRing2 << "physicalTaperRing2_"  << i;
    physiTaperRing2 = new G4PVPlacement(rotateSPRing,G4ThreeVector(0,0,z2),
        logicTaperRing2,strTaperRing2.str(),logicEMC,false,0);
 
    ostringstream strTaperRing3;
    strTaperRing3 << "physicalTaperRing3_"  << i;
    physiTaperRing3 = new G4PVPlacement(rotateSPRing,G4ThreeVector(0,0,z3),
        logicTaperRing3,strTaperRing3.str(),logicEMC,false,0);
  }
}

Referenced by Construct().

ConstructSPFrame() [2/2]

void BesEmcConstruction::ConstructSPFrame	(	G4LogicalVolume *	,
		BesEmcGeometry *
	)

GetBesEmcConstruction() [1/2]

BesEmcConstruction * BesEmcConstruction::GetBesEmcConstruction ( )

static

Definition at line 54 of file BesEmcConstruction.cc.

{ return fBesEmcConstruction;}

Referenced by BesCrystalParameterisation::ComputeIDAndSide(), and BesCrystalParameterisation::ComputeMaterial().

GetBesEmcConstruction() [2/2]

static BesEmcConstruction * BesEmcConstruction::GetBesEmcConstruction ( )

static

GetBSCCrystal() [1/2]

const G4VPhysicalVolume * BesEmcConstruction::GetBSCCrystal ( )

inline

Definition at line 113 of file InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh.

{return physiBSCCrystal;};

GetBSCCrystal() [2/2]

const G4VPhysicalVolume * BesEmcConstruction::GetBSCCrystal ( )

inline

Definition at line 113 of file Simulation/BOOST/EmcSim/EmcSim-00-00-46/EmcSim/BesEmcConstruction.hh.

{return physiBSCCrystal;};

GetBSCPhi() [1/2]

const G4VPhysicalVolume * BesEmcConstruction::GetBSCPhi ( )

inline

Definition at line 111 of file InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh.

{return physiBSCPhi;};

GetBSCPhi() [2/2]

const G4VPhysicalVolume * BesEmcConstruction::GetBSCPhi ( )

inline

Definition at line 111 of file Simulation/BOOST/EmcSim/EmcSim-00-00-46/EmcSim/BesEmcConstruction.hh.

{return physiBSCPhi;};

GetBSCTheta() [1/2]

const G4VPhysicalVolume * BesEmcConstruction::GetBSCTheta ( )

inline

Definition at line 112 of file InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh.

{return physiBSCTheta;};

GetBSCTheta() [2/2]

const G4VPhysicalVolume * BesEmcConstruction::GetBSCTheta ( )

inline

Definition at line 112 of file Simulation/BOOST/EmcSim/EmcSim-00-00-46/EmcSim/BesEmcConstruction.hh.

{return physiBSCTheta;};

GetCasingMaterial() [1/2]

G4Material * BesEmcConstruction::GetCasingMaterial ( )

inline

Definition at line 107 of file InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh.

{return fCasingMaterial;};

Referenced by BesCrystalParameterisation::ComputeMaterial(), and BesEmcDetectorMessenger::GetCurrentValue().

GetCasingMaterial() [2/2]

G4Material * BesEmcConstruction::GetCasingMaterial ( )

inline

Definition at line 107 of file Simulation/BOOST/EmcSim/EmcSim-00-00-46/EmcSim/BesEmcConstruction.hh.

{return fCasingMaterial;};

GetCrystalMaterial() [1/2]

G4Material * BesEmcConstruction::GetCrystalMaterial ( )

inline

Definition at line 106 of file InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh.

{return fCrystalMaterial;};     

Referenced by BesCrystalParameterisation::ComputeMaterial(), and BesEmcDetectorMessenger::GetCurrentValue().

GetCrystalMaterial() [2/2]

G4Material * BesEmcConstruction::GetCrystalMaterial ( )

inline

Definition at line 106 of file Simulation/BOOST/EmcSim/EmcSim-00-00-46/EmcSim/BesEmcConstruction.hh.

{return fCrystalMaterial;};     

GetCrystalParam() [1/2]

const G4VPVParameterisation * BesEmcConstruction::GetCrystalParam ( )

inline

Definition at line 114 of file InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh.

{return crystalParam;};

GetCrystalParam() [2/2]

const G4VPVParameterisation * BesEmcConstruction::GetCrystalParam ( )

inline

Definition at line 114 of file Simulation/BOOST/EmcSim/EmcSim-00-00-46/EmcSim/BesEmcConstruction.hh.

{return crystalParam;};

GetEMC() [1/2]

const G4VPhysicalVolume * BesEmcConstruction::GetEMC ( )

inline

Definition at line 110 of file InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh.

{return physiEMC; }

GetEMC() [2/2]

const G4VPhysicalVolume * BesEmcConstruction::GetEMC ( )

inline

Definition at line 110 of file Simulation/BOOST/EmcSim/EmcSim-00-00-46/EmcSim/BesEmcConstruction.hh.

{return physiEMC; }

GetLogicalVolume() [1/2]

void BesEmcConstruction::GetLogicalVolume

(

)

Definition at line 1466 of file BesEmcConstruction.cc.

{
  //-------------------------------------------------------------
  //Barrel
  logicBSCWorld = FindLogicalVolume("logicalBSCWorld"); 
  logicBSCCrystal = FindLogicalVolume("logicalCrystal");
  logicBSCPhi = FindLogicalVolume("logicalBSCPhi");
  logicRear = FindLogicalVolume("logicalRearBox");
  logicOrgGlass = FindLogicalVolume("logicalOrganicGlass");
  logicRearCasing = FindLogicalVolume("logicalRearCasing");
  logicAlPlate = FindLogicalVolume("logicalAlPlate");
  logicPD = FindLogicalVolume("logicalPD");
  logicPreAmpBox = FindLogicalVolume("logicalPreAmpBox");
  logicAirInPABox = FindLogicalVolume("logicalAirInPABox");
  logicHangingPlate = FindLogicalVolume("logicalHangingPlate");
  logicWaterPipe = FindLogicalVolume("logicalWaterPipe");
 
  for(int i = 0; i < 44; i++){
    std::ostringstream osnameBSCCasing;
    osnameBSCCasing << "logicalBSCCasing"<<i;
    logicBSCTheta = FindLogicalVolume( osnameBSCCasing.str() );
    if(logicBSCTheta)
    {
      G4VisAttributes* rightVisAtt= new G4VisAttributes(G4Colour(1.0, 0.0,0.0));
      rightVisAtt->SetVisibility(false);
      logicBSCTheta->SetVisAttributes(rightVisAtt);
    }
 
    std::ostringstream osnameBSCCable1;
    osnameBSCCable1 << "logicalBSCCable_1_"<<i;
    logicCable = FindLogicalVolume( osnameBSCCable1.str() );
    if(logicCable)
      logicCable->SetVisAttributes(G4VisAttributes::Invisible);
 
    std::ostringstream osnameBSCCable2;
    osnameBSCCable2 << "logicalBSCCable_2_"<<i;
    logicCable = FindLogicalVolume( osnameBSCCable2.str() );
    if(logicCable)
      logicCable->SetVisAttributes(G4VisAttributes::Invisible);
 
    std::ostringstream osnameOCGirder1;
    osnameOCGirder1 <<"logicalOpenningCutGirder_1_"<<i;
    logicOCGirder = FindLogicalVolume( osnameOCGirder1.str() );
    if(logicOCGirder)
      logicOCGirder->SetVisAttributes(G4VisAttributes::Invisible);
 
    std::ostringstream osnameOCGirder2;
    osnameOCGirder2 <<"logicalOpenningCutGirder_2_"<<i;
    logicOCGirder = FindLogicalVolume( osnameOCGirder2.str() );
    if(logicOCGirder)
      logicOCGirder->SetVisAttributes(G4VisAttributes::Invisible);
 
    std::ostringstream osnameOCGirder3;
    osnameOCGirder3 <<"logicalOpenningCutGirder_3_"<<i;
    logicOCGirder = FindLogicalVolume( osnameOCGirder3.str() );
    if(logicOCGirder)
      logicOCGirder->SetVisAttributes(G4VisAttributes::Invisible);
 
    std::ostringstream osnameOCGirder4;
    osnameOCGirder4 <<"logicalOpenningCutGirder_4_"<<i;
    logicOCGirder = FindLogicalVolume( osnameOCGirder4.str() );
    if(logicOCGirder)
      logicOCGirder->SetVisAttributes(G4VisAttributes::Invisible);
  }
 
  //-------------------------------------------------------------
  //Support system
  logicSupportBar = FindLogicalVolume("logicalSupportBar0");
  logicSupportBar1 = FindLogicalVolume("logicalSupportBar1");
  logicEndRing = FindLogicalVolume("logicalEndRing");
  logicGear = FindLogicalVolume("logicalGear");
  logicTaperRing1 = FindLogicalVolume("logicalTaperRing1");
  logicTaperRing2 = FindLogicalVolume("logicalTaperRing2");
  logicTaperRing3 = FindLogicalVolume("logicalTaperRing3");
 
  //-------------------------------------------------------------
  //Endcap
  logicEnd = FindLogicalVolume("logicalEndWorld");
 
  for(G4int sector=0;sector<3;sector++) {
    std::ostringstream osnameEndPhi;
    osnameEndPhi<<"logicalEndPhi"<<sector;
    logicEndPhi = FindLogicalVolume(osnameEndPhi.str());
    if(logicEndPhi) {
      logicEndPhi->SetVisAttributes(G4VisAttributes::Invisible);
    } else {
      G4cout<<"Can't find logicEndPhi!"<<G4endl;
    }
 
    for(G4int cryNb=0;cryNb<35;cryNb++) {
 
      std::ostringstream osnameEndCrystal;
      osnameEndCrystal<<"logicalEndCrystal_"<<sector<<"_"<<cryNb;
      logicEndCrystal = FindLogicalVolume( osnameEndCrystal.str() );
      if(logicEndCrystal) {
        logicEndCrystal->SetSensitiveDetector(besEMCSD);
        G4VisAttributes* crystalVisAtt
          = new G4VisAttributes(G4Colour(0.5,0,1.0));
        crystalVisAtt->SetVisibility(false);
        logicEndCrystal->SetVisAttributes(crystalVisAtt);
      } else {
        G4cout<<"Can't find: "<<osnameEndCrystal.str()<<G4endl;
      }
 
      std::ostringstream osnameEndCasing;
      osnameEndCasing<<"logicalEndCasing_"<<sector<<"_"<<cryNb;
      logicEndCasing = FindLogicalVolume( osnameEndCasing.str() );
      if(logicEndCasing) {
        logicEndCasing->SetVisAttributes(G4VisAttributes::Invisible);
      } else {
        G4cout<<"Can't find: "<<osnameEndCasing.str()<<G4endl;
      }
    }
  }
}

Referenced by Construct().

GetLogicalVolume() [2/2]

void BesEmcConstruction::GetLogicalVolume

(

)

GetMagField() [1/2]

G4double BesEmcConstruction::GetMagField ( )

inline

Definition at line 102 of file InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh.

{return fmagField;};

Referenced by BesEmcDetectorMessenger::BesEmcDetectorMessenger().

GetMagField() [2/2]

G4double BesEmcConstruction::GetMagField ( )

inline

Definition at line 102 of file Simulation/BOOST/EmcSim/EmcSim-00-00-46/EmcSim/BesEmcConstruction.hh.

{return fmagField;};

GetStartIDTheta() [1/2]

G4int BesEmcConstruction::GetStartIDTheta ( )

inline

Definition at line 104 of file InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh.

{return startID;};

GetStartIDTheta() [2/2]

G4int BesEmcConstruction::GetStartIDTheta ( )

inline

Definition at line 104 of file Simulation/BOOST/EmcSim/EmcSim-00-00-46/EmcSim/BesEmcConstruction.hh.

{return startID;};

GetVerboseLevel() [1/2]

G4int BesEmcConstruction::GetVerboseLevel ( )

inline

Definition at line 101 of file InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh.

{return verboseLevel;};

Referenced by BesCrystalParameterisation::ComputeIDAndSide(), and BesEmcDetectorMessenger::GetCurrentValue().

GetVerboseLevel() [2/2]

G4int BesEmcConstruction::GetVerboseLevel ( )

inline

Definition at line 101 of file Simulation/BOOST/EmcSim/EmcSim-00-00-46/EmcSim/BesEmcConstruction.hh.

{return verboseLevel;};

PrintEMCParameters() [1/2]

void BesEmcConstruction::PrintEMCParameters

(

)

Definition at line 1713 of file BesEmcConstruction.cc.

{
  G4cout << "-------------------------------------------------------"<< G4endl
    << "---> There are "
    << phiNbCrystals << "(max=" << (*besEMCGeometry).BSCNbPhi
    << ") crystals along phi direction and "
    << thetaNbCrystals << "(max=" << (*besEMCGeometry).BSCNbTheta
    << ") crystals along theta direction."<< G4endl
    << "The crystals have sizes of "
    << (*besEMCGeometry).BSCCryLength/cm << "cm(L) and "
    << (*besEMCGeometry).BSCYFront/cm << "cm(Y) with " 
    << fCrystalMaterial->GetName() <<"."<< G4endl
    << "The casing is layer of "
    << (*besEMCGeometry).fTyvekThickness/mm << "mm tyvek,"
    << (*besEMCGeometry).fAlThickness/mm << "mm aluminum and"
    << (*besEMCGeometry).fMylarThickness/mm << "mm mylar."<< G4endl
    << "-------------------------------------------------------"<< G4endl;
  G4cout << G4Material::GetMaterial("PolyethyleneTerephthlate") << G4endl
    << G4Material::GetMaterial("Casing") << G4endl
    << G4Material::GetMaterial("Polyethylene") << G4endl
    << "-------------------------------------------------------"<< G4endl;
}

Referenced by Construct(), SetCasingMaterial(), and SetCrystalMaterial().

PrintEMCParameters() [2/2]

void BesEmcConstruction::PrintEMCParameters

(

)

RotAngleFromNewZ() [1/2]

Hep3Vector BesEmcConstruction::RotAngleFromNewZ

(

Hep3Vector

newZ

)

Definition at line 1908 of file BesEmcConstruction.cc.

{
  newZ.setMag(1.0);
  Hep3Vector x0(1, 0, 0), y0(0, 1, 0), z0(0, 0, 1);
  double dx, dy, dz = 0.0; 
 
  Hep3Vector a(0.0, newZ.y(), newZ.z());
  // three rotated angles, rotate dx angles(rad) by X axis,
  // then rotate dy by new Y axis, then dz by new Z axis;
  // all rotate in left hand system;
 
  // a, project of final newZ on original YZ plane, 0 <= theta < pi;
  if(a.mag() != 0.0) a.setMag(1.0);
  else cout << "newZ on X axis, a=(0,0,0)" << endl;
  dx = acos(a.dot(z0));
  if(a.dot(z0) == -1.0) dx = 0.0;
 
  // b, rotate dx angle of z0 around original X axis(x0), 
  Hep3Vector b(0, sin(dx), cos(dx));
  dy = acos(b.dot(newZ));
  if(newZ.x() > 0.0) dy = -dy;
 
  Hep3Vector v(dx, dy, dz);
  return v;
}

Referenced by TransformToArb8().

RotAngleFromNewZ() [2/2]

Hep3Vector BesEmcConstruction::RotAngleFromNewZ

(

Hep3Vector

newZ

)

SetBSCCrystalLength() [1/2]

void BesEmcConstruction::SetBSCCrystalLength

(

G4double

val

)

Definition at line 1801 of file BesEmcConstruction.cc.

{
  (*besEMCGeometry).BSCCryLength = val;
}

Referenced by BesEmcDetectorMessenger::SetNewValue().

SetBSCCrystalLength() [2/2]

void BesEmcConstruction::SetBSCCrystalLength

(

G4double

)

SetBSCNbPhi() [1/2]

void BesEmcConstruction::SetBSCNbPhi

(

G4int

val

)

Definition at line 1781 of file BesEmcConstruction.cc.

{
  (*besEMCGeometry).BSCNbPhi = val;
}

Referenced by BesEmcDetectorMessenger::SetNewValue().

SetBSCNbPhi() [2/2]

void BesEmcConstruction::SetBSCNbPhi

(

G4int

)

SetBSCNbTheta() [1/2]

void BesEmcConstruction::SetBSCNbTheta

(

G4int

val

)

Definition at line 1788 of file BesEmcConstruction.cc.

{
  (*besEMCGeometry).BSCNbTheta = val;
}

Referenced by BesEmcDetectorMessenger::SetNewValue().

SetBSCNbTheta() [2/2]

void BesEmcConstruction::SetBSCNbTheta

(

G4int

)

SetBSCPosition0() [1/2]

void BesEmcConstruction::SetBSCPosition0

(

G4double

val

)

Definition at line 1822 of file BesEmcConstruction.cc.

{
  (*besEMCGeometry).BSCPosition0 = val;
}

SetBSCPosition0() [2/2]

void BesEmcConstruction::SetBSCPosition0

(

G4double

)

SetBSCPosition1() [1/2]

void BesEmcConstruction::SetBSCPosition1

(

G4double

val

)

Definition at line 1829 of file BesEmcConstruction.cc.

{
  (*besEMCGeometry).BSCPosition1 = val;
}

SetBSCPosition1() [2/2]

void BesEmcConstruction::SetBSCPosition1

(

G4double

)

SetBSCRmin() [1/2]

void BesEmcConstruction::SetBSCRmin

(

G4double

val

)

Definition at line 1774 of file BesEmcConstruction.cc.

{
  (*besEMCGeometry).BSCRmin = val;
}

Referenced by BesEmcDetectorMessenger::SetNewValue().

SetBSCRmin() [2/2]

void BesEmcConstruction::SetBSCRmin

(

G4double

)

SetBSCYFront() [1/2]

void BesEmcConstruction::SetBSCYFront

(

G4double

val

)

Definition at line 1815 of file BesEmcConstruction.cc.

{
  (*besEMCGeometry).BSCYFront = val;
}

SetBSCYFront() [2/2]

void BesEmcConstruction::SetBSCYFront

(

G4double

)

SetBSCYFront0() [1/2]

void BesEmcConstruction::SetBSCYFront0

(

G4double

val

)

Definition at line 1808 of file BesEmcConstruction.cc.

{
  (*besEMCGeometry).BSCYFront0 = val;
}

SetBSCYFront0() [2/2]

void BesEmcConstruction::SetBSCYFront0

(

G4double

)

SetCasingMaterial() [1/2]

void BesEmcConstruction::SetCasingMaterial

(

G4String

materialChoice

)

Definition at line 1751 of file BesEmcConstruction.cc.

{
  // search the material by its name 
  G4Material* pttoMaterial = G4Material::GetMaterial(materialChoice);  
  if (pttoMaterial)
  {fCasingMaterial = pttoMaterial;
    logicBSCTheta->SetMaterial(pttoMaterial);
    PrintEMCParameters();
  }             
}

Referenced by BesEmcDetectorMessenger::SetNewValue().

SetCasingMaterial() [2/2]

void BesEmcConstruction::SetCasingMaterial

(

G4String

)

SetCasingThickness() [1/2]

void BesEmcConstruction::SetCasingThickness

(

G4ThreeVector

val

)

Definition at line 1764 of file BesEmcConstruction.cc.

{
  // change Gap thickness and recompute the calorimeter parameters
  (*besEMCGeometry).fTyvekThickness = val('X');
  (*besEMCGeometry).fAlThickness    = val('Y');
  (*besEMCGeometry).fMylarThickness = val('Z');
}  

Referenced by BesEmcDetectorMessenger::SetNewValue().

SetCasingThickness() [2/2]

void BesEmcConstruction::SetCasingThickness

(

G4ThreeVector

)

SetCrystalMaterial() [1/2]

void BesEmcConstruction::SetCrystalMaterial

(

G4String

materialChoice

)

Definition at line 1738 of file BesEmcConstruction.cc.

{
  // search the material by its name   
  G4Material* pttoMaterial = G4Material::GetMaterial(materialChoice);     
  if (pttoMaterial)
  {fCrystalMaterial = pttoMaterial;
    logicBSCCrystal->SetMaterial(pttoMaterial); 
    PrintEMCParameters();
  }             
}

Referenced by BesEmcDetectorMessenger::SetNewValue().

SetCrystalMaterial() [2/2]

void BesEmcConstruction::SetCrystalMaterial

(

G4String

)

SetMagField() [1/2]

void BesEmcConstruction::SetMagField

(

G4double

fieldValue

)

Definition at line 1837 of file BesEmcConstruction.cc.

{
  //apply a global uniform magnetic field along Z axis
  G4FieldManager* fieldMgr 
    = G4TransportationManager::GetTransportationManager()->GetFieldManager();
 
  if(magField) delete magField;     //delete the existing magn field
 
  if(fieldValue!=0.)            // create a new one if non nul
  { magField = new G4UniformMagField(G4ThreeVector(0.,0.,fieldValue));        
    fieldMgr->SetDetectorField(magField);
    fieldMgr->CreateChordFinder(magField);
    fmagField=fieldValue;
  } else {
    magField = 0;
    fieldMgr->SetDetectorField(magField);
    fmagField=0.;
  }
}

Referenced by BesEmcDetectorMessenger::SetNewValue().

SetMagField() [2/2]

void BesEmcConstruction::SetMagField

(

G4double

)

SetStartIDTheta() [1/2]

void BesEmcConstruction::SetStartIDTheta

(

G4int

val

)

Definition at line 1793 of file BesEmcConstruction.cc.

{
  startID = val;
}

Referenced by BesEmcDetectorMessenger::SetNewValue().

SetStartIDTheta() [2/2]

void BesEmcConstruction::SetStartIDTheta

(

G4int

)

SetVerboseLevel() [1/2]

void BesEmcConstruction::SetVerboseLevel ( G4int  val )

inline

Definition at line 69 of file InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh.

{ verboseLevel=val;}

Referenced by BesEmcDetectorMessenger::SetNewValue().

SetVerboseLevel() [2/2]

void BesEmcConstruction::SetVerboseLevel ( G4int  val )

inline

Definition at line 69 of file Simulation/BOOST/EmcSim/EmcSim-00-00-46/EmcSim/BesEmcConstruction.hh.

{ verboseLevel=val;}

SetVisAndSD() [1/2]

void BesEmcConstruction::SetVisAndSD

(

)

Definition at line 1393 of file BesEmcConstruction.cc.

{
  //-------------------------------------------------------------
  //Barrel
  G4VisAttributes* bscVisAtt= new G4VisAttributes(G4Colour(0.5,0.5,0.5));
  bscVisAtt->SetVisibility(false);
  logicEMC->SetVisAttributes(bscVisAtt);
  if(logicBSCWorld)
    logicBSCWorld->SetVisAttributes(G4VisAttributes::Invisible);
 
  if (logicBSCCrystal) {
    //G4cout<<"find BSCCrystal "<<G4endl;
    G4VisAttributes* crystalVisAtt= new G4VisAttributes(G4Colour(0,0,1.0));
    crystalVisAtt->SetVisibility(true);
    logicBSCCrystal->SetVisAttributes(crystalVisAtt);
    logicBSCCrystal->SetSensitiveDetector(besEMCSD);
  }
 
  if(logicBSCPhi) {
    G4VisAttributes* rightVisAtt= new G4VisAttributes(G4Colour(1.0,0.,1.0));
    rightVisAtt->SetVisibility(false);
    logicBSCPhi->SetVisAttributes(rightVisAtt);
  }
 
  if(logicRear)
    logicRear->SetVisAttributes(G4VisAttributes::Invisible);
  if(logicOrgGlass)
    logicOrgGlass->SetVisAttributes(G4VisAttributes::Invisible);
  if(logicRearCasing)
    logicRearCasing->SetVisAttributes(G4VisAttributes::Invisible);
  if(logicAlPlate) 
    logicAlPlate->SetVisAttributes(G4VisAttributes::Invisible);
  if(logicPD) {
    logicPD->SetVisAttributes(G4VisAttributes::Invisible);
    logicPD->SetSensitiveDetector(besEMCSD);
  }
  if(logicPreAmpBox)
    logicPreAmpBox->SetVisAttributes(G4VisAttributes::Invisible);
  if(logicAirInPABox)
    logicAirInPABox->SetVisAttributes(G4VisAttributes::Invisible);
  if(logicHangingPlate)
    logicHangingPlate->SetVisAttributes(G4VisAttributes::Invisible);
  if(logicWaterPipe)
    logicWaterPipe->SetVisAttributes(G4VisAttributes::Invisible);
 
  //-------------------------------------------------------------
  //Support system
  G4VisAttributes* ringVisAtt= new G4VisAttributes(G4Colour(0.5,0.25,0.));
  ringVisAtt->SetVisibility(false);
  if(logicSupportBar)
    logicSupportBar->SetVisAttributes(ringVisAtt);
  if(logicSupportBar1)
    logicSupportBar1->SetVisAttributes(ringVisAtt);
  if(logicEndRing)
    logicEndRing->SetVisAttributes(ringVisAtt);
  if(logicGear)
    logicGear->SetVisAttributes(ringVisAtt);
  if(logicTaperRing1)
    logicTaperRing1->SetVisAttributes(ringVisAtt);
  if(logicTaperRing2)
    logicTaperRing2->SetVisAttributes(ringVisAtt);
  if(logicTaperRing3)
    logicTaperRing3->SetVisAttributes(ringVisAtt);
 
  //-------------------------------------------------------------
  //Endcap
  G4VisAttributes* endPhiVisAtt= new G4VisAttributes(G4Colour(0,1.0,0));
  endPhiVisAtt->SetVisibility(false);
  if(logicEnd)
    logicEnd->SetVisAttributes(endPhiVisAtt);
}

Referenced by Construct().

SetVisAndSD() [2/2]

void BesEmcConstruction::SetVisAndSD

(

)

ThreeVectorTrans() [1/2]

void BesEmcConstruction::ThreeVectorTrans	(	G4ThreeVector	fPnt[8],
		double	x[8],
		double	y[8],
		double	z[8]
	)

Definition at line 1897 of file BesEmcConstruction.cc.

{
  for (int i = 0; i < 8; i++) {
    x[i] = fPnt[i].x();
    y[i] = fPnt[i].y();
    z[i] = fPnt[i].z();
  }
}

ThreeVectorTrans() [2/2]

void BesEmcConstruction::ThreeVectorTrans	(	G4ThreeVector	fPnt[8],
		double	x[8],
		double	y[8],
		double	z[8]
	)

TransformToArb8() [1/2]

void BesEmcConstruction::TransformToArb8	(	const G4ThreeVector	fPnt[8],
		G4ThreeVector	newfPnt[8],
		G4ThreeVector &	center,
		G4ThreeVector &	rotAngle
	)

Definition at line 1867 of file BesEmcConstruction.cc.

{
  HepPoint3D point[8];
  center = G4ThreeVector(0.0, 0.0, 0.0);
  for (int i = 0; i < 8; i++) {
    point[i] = HepPoint3D( fPnt[i].x(), fPnt[i].y(), fPnt[i].z() );
    center += point[i];
  }
  center /= 8.0;
 
  HepPlane3D bottomPlane( point[4], point[5], point[6] );
  HepPoint3D centerProject = bottomPlane.point( center );
  Hep3Vector newZ = center - centerProject;
 
  rotAngle = RotAngleFromNewZ( newZ );
  G4RotationMatrix *g4Rot = new G4RotationMatrix();
  g4Rot->rotateX( rotAngle.x() );
  g4Rot->rotateY( rotAngle.y() );
 
  G4AffineTransform *transform = new G4AffineTransform( g4Rot, center );
  transform->Invert();
  for (int i = 0; i < 8; i++) {
    newfPnt[i] = transform->TransformPoint(fPnt[i]);
  }
  delete g4Rot;
  delete transform;
}

Referenced by ConstructEndGeometry().

TransformToArb8() [2/2]

void BesEmcConstruction::TransformToArb8	(	const G4ThreeVector	fPnt[8],
		G4ThreeVector	newfPnt[8],
		G4ThreeVector &	center,
		G4ThreeVector &	rotAngle
	)

UpdateGeometry() [1/2]

void BesEmcConstruction::UpdateGeometry

(

)

Definition at line 1859 of file BesEmcConstruction.cc.

{
  ;//G4RunManager::GetRunManager()->DefineWorldVolume(BesDetectorConstruction::Construct());
}

Referenced by BesEmcDetectorMessenger::SetNewValue().

UpdateGeometry() [2/2]

void BesEmcConstruction::UpdateGeometry

(

)

---

The documentation for this class was generated from the following files:

• InstallArea/include/EmcSim/EmcSim/BesEmcConstruction.hh
• Simulation/BOOST/EmcSim/EmcSim-00-00-46/EmcSim/BesEmcConstruction.hh
• BesEmcConstruction.cc