MucAbsorber Class Reference

#include <MucAbsorber.h>

Inheritance diagram for MucAbsorber:

Public Member Functions
	MucAbsorber (int part, int segment, int layer, int id)
	MucAbsorber (const MucAbsorber &other)
MucAbsorber &	operator= (const MucAbsorber &other)
virtual	~MucAbsorber ()
Public Member Functions inherited from MucEntity
	MucEntity (int part, int segment, int layer)
	MucEntity (int part, int segment, int layer, int id)
	MucEntity (int part, int segment, int layer, int upDown, int id)
	MucEntity (int part, int segment, int layer, int upDown, int rpcId, int id)
	MucEntity (const MucEntity &other)
MucEntity &	operator= (const MucEntity &other)
virtual	~MucEntity ()
int	GetPart ()
int	GetSegment ()
int	GetLayer ()
int	GetUpDown ()
int	GetRpcId ()
int	GetID ()
double	GetTheta ()
double	GetRin ()
double	GetRout ()
double	GetRc ()
double	GetThin ()
double	GetW ()
double	GetH ()
double	GetL ()
double	GetWu ()
double	GetWd ()
double	GetArea ()
double	GetLocOrgInBes (int i)
double	GetObjRotToMot (int i)
double	GetObjOrgInBes (int i)
double	GetObjOrgInLoc (int i)
double *	GetLocOrgInBes ()
double *	GetObjRotToMot ()
double *	GetObjOrgInLoc ()
double *	GetObjOrgInBes ()
void	TransBesToLoc (double LocCoord[], double BesCoord[], double LocOrgInBes[], double Rot_z)
void	TransLocToBes (double LocCoord[], double BesCoord[], double LocOrgInBes[], double Rot_z)

Protected Member Functions
virtual void	Init ()
virtual void	SetTheta ()
virtual void	SetRin ()
virtual void	SetRout ()
virtual void	SetRc ()
virtual void	SetThin ()
virtual void	SetW ()
virtual void	SetH ()
virtual void	SetL ()
virtual void	SetWu ()
virtual void	SetWd ()
virtual void	SetLocOrgInBes ()
virtual void	SetObjRotToMot ()
virtual void	SetObjOrgInBes ()
virtual void	SetObjOrgInLoc ()
Protected Member Functions inherited from MucEntity
virtual void	Init ()
virtual void	SetTheta ()
virtual void	SetRin ()
virtual void	SetRout ()
virtual void	SetRc ()
virtual void	SetThin ()
virtual void	SetW ()
virtual void	SetH ()
virtual void	SetL ()
virtual void	SetWu ()
virtual void	SetWd ()
virtual void	SetArea ()
virtual void	SetLocOrgInBes ()
virtual void	SetObjRotToMot ()
virtual void	SetObjOrgInBes ()
virtual void	SetObjOrgInLoc ()
virtual void	SetAlignment (double dx, double dy, double dz)

Additional Inherited Members
Protected Attributes inherited from MucEntity
int	m_Part
int	m_Segment
int	m_Layer
int	m_UpDown
int	m_RpcId
int	m_ID
double	m_Theta
double	m_Rin
double	m_Rout
double	m_Rc
double	m_Thin
double	m_W
double	m_H
double	m_L
double	m_Wu
double	m_Wd
double	m_Area
double	m_LocOrgInBes [3]
double	m_ObjRotToMot [3]
double	m_ObjOrgInBes [3]
double	m_ObjOrgInLoc [3]

Detailed Description

Definition at line 17 of file MucAbsorber.h.

Constructor & Destructor Documentation

MucAbsorber() [1/2]

MucAbsorber::MucAbsorber	(	int	part,
		int	segment,
		int	layer,
		int	id
	)

Definition at line 17 of file MucAbsorber.cxx.

                                                                   : MucEntity( part, segment, layer, id )
{
    MucAbsorber::Init();
}

MucAbsorber() [2/2]

MucAbsorber::MucAbsorber

(

const MucAbsorber &

other

)

Definition at line 23 of file MucAbsorber.cxx.

: MucEntity( other ) { ; }

~MucAbsorber()

MucAbsorber::~MucAbsorber ( )

virtual

Definition at line 37 of file MucAbsorber.cxx.

{ ; }

Member Function Documentation

Init()

void MucAbsorber::Init ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 40 of file MucAbsorber.cxx.

{
        SetTheta();
        SetRin();
        SetRout();
        SetRc();
 
        SetThin();
        SetW(); 
    SetWu();
    SetWd();
    SetH();
    SetL();
    SetLocOrgInBes();
    SetObjRotToMot();
    SetObjOrgInBes();
        SetObjOrgInLoc();
}

Referenced by MucAbsorber().

operator=()

MucAbsorber & MucAbsorber::operator=

(

const MucAbsorber &

other

)

Definition at line 26 of file MucAbsorber.cxx.

{
    if( this == &other)
                return *this;
    
    MucEntity::operator =(other);
 
    return *this;
}

SetH()

void MucAbsorber::SetH ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 130 of file MucAbsorber.cxx.

{
    if( m_Part == BRID )
        m_H = B_AS_TH[m_Layer];
    else
    {
        if( m_ID == -1 ) // temporary local
            m_H = E_AS_RMAX;
        else
            m_H = E_AS_RMAX - E_AS_RMIN[m_Layer];
    }
}

Referenced by Init().

SetL()

void MucAbsorber::SetL ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 143 of file MucAbsorber.cxx.

{
    if( m_Part == BRID )
        m_L = B_AS_LMAX;
    else
        m_L = E_AS_TH[m_Layer];
}

Referenced by Init().

SetLocOrgInBes()

void MucAbsorber::SetLocOrgInBes ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 186 of file MucAbsorber.cxx.

{
    double x, y, z;
  x = y = z = 0.0;
    
    //---------- set x and y --------
    if( m_Part == BRID || m_ID == -1 ) // the local(mother) in BES
    {   
                x = m_Rc * cos( m_Theta );
                y = m_Rc * sin( m_Theta );
    } // barrel
    else // for endcap panel, calculate the origin of temporary local in BES
    {   
        // set x and y  
        double tempR, tempTheta;
        tempR = sqrt(2.0) * E_AS_RMAX / 2.0;
        tempTheta = ( 2*m_Segment + 1 ) * ( MUC_PI / 4.0 );
        
        x = tempR * cos( tempTheta );
        y = tempR * sin( tempTheta );
        
    }// endcap
    
        //---------- set z  ----------- 
    if( m_Part == BRID ) z = 0.;
    else
    {
                for( int i=0; i<m_Layer+1; i++ ) z += E_AS_TH[i];
 
                z += m_Layer * AS_GAP;
                z += (E_AS_ZMAX - E_AS_TOTAL_TH ) - m_Thin/2.0;  
        z *= cos( m_Part*MUC_PI/2.0 );
    }
 
        m_LocOrgInBes[0] = x;
        m_LocOrgInBes[1] = y;
        m_LocOrgInBes[2] = z;
 
    // limit cut
    for(int i=0; i<3; i++) {
        if( fabs(m_LocOrgInBes[i]) < ERR_LIMIT ) m_LocOrgInBes[i] = 0; 
    }       
}

Referenced by Init().

SetObjOrgInBes()

void MucAbsorber::SetObjOrgInBes ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 241 of file MucAbsorber.cxx.

{
    double x, y;
 
    if( m_Part == BRID || m_ID == -1 ) // object is concided with local
    {
            m_ObjOrgInBes[0] = m_LocOrgInBes[0];
            m_ObjOrgInBes[1] = m_LocOrgInBes[1];
            m_ObjOrgInBes[2] = m_LocOrgInBes[2];
 
    } // local      
    else 
    {
                //-------- set x and y ------------  
        // endcap panels
        // setting segment 0 as reference 
        if( m_ID == 0 )
        {
            x = m_Rc;
            y = m_Rc * tan( m_Theta ) / 2.0;
        }
        else if ( m_ID ==1 )
        {
            x = m_Rc * cos( m_Theta );
                    y = m_Rc * sin( m_Theta );  
        }
        else // m_ID == 2
        {
            x = m_Rc / tan( m_Theta ) / 2.0;
            y = m_Rc;
        }
            
        // x, y signs of coordinate different by segment 
        if( m_Segment == 0 )       {    ;       }
        else if ( m_Segment == 1 ) {    x = -x;     }
        else if ( m_Segment == 2 ) {    x = -x; y = -y; }
        else               {    y = -y;     }
 
            m_ObjOrgInBes[0] = x;
            m_ObjOrgInBes[1] = y;
 
            // limit cut
            for( int i=0; i<2; i++ ) {
                    if( fabs(m_ObjOrgInBes[i]) < ERR_LIMIT ) m_ObjOrgInBes[i] = 0;
            }
        
        //---------- set z--------------
        m_ObjOrgInBes[2] = m_LocOrgInBes[2];
 
    } // else, endcap panels
}

Referenced by Init().

SetObjOrgInLoc()

void MucAbsorber::SetObjOrgInLoc ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 293 of file MucAbsorber.cxx.

{
    if( m_Part == BRID || m_ID == -1 ) // for barrel and endcap local
        for(int i=0; i<3; i++) m_ObjOrgInLoc[i] = 0.;
    else                   // for endcap panels
        for(int i=0; i<3; i++) m_ObjOrgInLoc[i] = m_ObjOrgInBes[i] - m_LocOrgInBes[i];
}

Referenced by Init().

SetObjRotToMot()

void MucAbsorber::SetObjRotToMot ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 230 of file MucAbsorber.cxx.

{
    m_ObjRotToMot[0] = 0.;
    m_ObjRotToMot[1] = 0.;
 
    if( m_Part == BRID )
        m_ObjRotToMot[2] = MUC_PI * (m_Segment - 2) / 4.0;
    else
        m_ObjRotToMot[2] = 0.;
}

Referenced by Init().

SetRc()

void MucAbsorber::SetRc ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 96 of file MucAbsorber.cxx.

{
    if( m_Part == BRID )
        m_Rc = B_AS_RMIN[m_Layer] + B_AS_TH[m_Layer]/2.0;
    else
    {
        if( m_ID == -1 )
            m_Rc = sqrt(2.0) * E_AS_RMAX / 2.0;
        else
            m_Rc = (m_Rin + m_Rout)/2.0;
    }
}

Referenced by Init().

SetRin()

void MucAbsorber::SetRin ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 74 of file MucAbsorber.cxx.

{
        if( m_Part == BRID )
                m_Rin = B_AS_RMIN[m_Layer];
        else
        {
                if( m_ID == -1 )
                        m_Rin = 0.0;
                else
                        m_Rin = E_AS_RMIN[m_Layer];
        }
}

Referenced by Init().

SetRout()

void MucAbsorber::SetRout ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 87 of file MucAbsorber.cxx.

{
        if( m_Part == BRID )
                m_Rout = B_AS_RMIN[m_Layer] + B_AS_TH[m_Layer] ;
        else
                m_Rout = E_AS_RMAX;
}

Referenced by Init().

SetTheta()

void MucAbsorber::SetTheta ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 61 of file MucAbsorber.cxx.

{
        if( m_Part == BRID )
                m_Theta = m_Segment * ( MUC_PI/4.0 );
        else
        {
                if( m_ID == -1 )
                        m_Theta = ( 2*m_Segment + 1 ) * ( MUC_PI/4.0 );
                else
                        m_Theta = ( MUC_PI/4.0 ) + ( m_ID - 1) * MUC_PI / 8.0 ;
        }
}

Referenced by Init().

SetThin()

void MucAbsorber::SetThin ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 109 of file MucAbsorber.cxx.

{
        if( m_Part == BRID )
                m_Thin = B_AS_TH[m_Layer];
        else
                m_Thin = E_AS_TH[m_Layer];
}

Referenced by Init().

SetW()

void MucAbsorber::SetW ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 117 of file MucAbsorber.cxx.

{
    if( m_Part == BRID)
        m_W = 2.0 * VALUE * m_Rout;
    else
    {
        if( m_ID == -1 ) // temporary local 
            m_W = E_AS_RMAX;
        else
            m_W = 0;
    }
}

Referenced by Init().

SetWd()

void MucAbsorber::SetWd ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 168 of file MucAbsorber.cxx.

{
     if( m_Part == BRID )
          m_Wd = 2.0 * VALUE * m_Rout;
        else
        {
        if( m_ID == -1 )    // temporary local
            m_Wd = m_W;
            if( m_ID == 1 )     // center panel 
                    m_Wd = 2.0 * VALUE * E_AS_RMAX;
                else
                    m_Wd = VALUE * E_AS_RMAX;
        }
 
    m_Wd -= 0.8;  //mm, avoid overlaping
}

Referenced by Init().

SetWu()

void MucAbsorber::SetWu ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 151 of file MucAbsorber.cxx.

{
    if( m_Part == BRID )
        m_Wu = 2 * VALUE * m_Rin;
    else
    {
        if( m_ID == -1 )    // temporary local
            m_Wu = m_W;
        else if( m_ID == 1 )    // center panel 
            m_Wu = 2 * VALUE * m_Rin;
        else
            m_Wu = VALUE * m_Rin;
    }
 
    m_Wu -= 0.8; //mm, avoid overlaping
}

Referenced by Init().

---

The documentation for this class was generated from the following files:

• MucAbsorber.h
• MucAbsorber.cxx