MdcTrackList Class Reference

#include <MdcTrackList.h>

Inheritance diagram for MdcTrackList:

Public Member Functions
	MdcTrackList (const MdcTrackParams &tkPar)
	~MdcTrackList ()
int	createFromSegs (MdcSegList *segs, const MdcHitMap *, const MdcDetector *, TrkContext &, double bunchTime)
int	finishCircle (MdcTrack &track, const MdcHitMap *, const MdcDetector *)
int	finishHelix (MdcTrack &track, const MdcHitMap *, const MdcDetector *)
int	pickHits (MdcTrack *, const MdcHitMap *, const MdcDetector *, bool pickAmb=true)
void	dumpSeed (const MdcSeg *seed, bool goodOnly)
void	dumpCircle (const MdcTrack *)
void	dumpAxFill (const MdcTrack *)
void	dumpAxCombine (const MdcTrack *)
void	dumpD0 (const TrkExchangePar &)
void	dumpStFill ()
void	dumpStCombine (const MdcTrack *)
void	dumpHelix (const MdcTrack *)
void	dropMultiHotInLayer (const MdcTrack *tk)
	MdcTrackList (const MdcTrackParams &tkPar)
	~MdcTrackList ()
int	createFromSegs (MdcSegList *segs, const MdcHitMap *, const MdcDetector *, TrkContext &, double bunchTime)
int	finishCircle (MdcTrack &track, const MdcHitMap *, const MdcDetector *)
int	finishHelix (MdcTrack &track, const MdcHitMap *, const MdcDetector *)
int	pickHits (MdcTrack *, const MdcHitMap *, const MdcDetector *, bool pickAmb=true)
void	dumpSeed (const MdcSeg *seed, bool goodOnly)
void	dumpCircle (const MdcTrack *)
void	dumpAxFill (const MdcTrack *)
void	dumpAxCombine (const MdcTrack *)
void	dumpD0 (const TrkExchangePar &)
void	dumpStFill ()
void	dumpStCombine (const MdcTrack *)
void	dumpHelix (const MdcTrack *)
void	dropMultiHotInLayer (const MdcTrack *tk)
Public Member Functions inherited from MdcTrackListBase
	MdcTrackListBase (const MdcTrackParams &tkPar)
virtual	~MdcTrackListBase ()
int	nTrack () const
void	setPlot (int plotFlag)
void	newParams (const MdcTrackParams &tkPar)
void	plot () const
void	store (RecMdcTrackCol *, RecMdcHitCol *)
virtual int	createFromSegs (MdcSegList *, const MdcHitMap *, const MdcDetector *, TrkContext &, double bunchTime)=0
int	arbitrateHits ()
void	dropMultiHotInLayer (const MdcTrack *tk)
void	remove (MdcTrack *atrack)
void	setD0Cut (double d0Cut)
void	setZ0Cut (double z0Cut)
void	setPtCut (double ptCut)
void	setNoInner (bool noInnerFlag)
	MdcTrackListBase (const MdcTrackParams &tkPar)
virtual	~MdcTrackListBase ()
int	nTrack () const
void	setPlot (int plotFlag)
void	newParams (const MdcTrackParams &tkPar)
void	plot () const
void	store (RecMdcTrackCol *, RecMdcHitCol *)
virtual int	createFromSegs (MdcSegList *, const MdcHitMap *, const MdcDetector *, TrkContext &, double bunchTime)=0
int	arbitrateHits ()
void	dropMultiHotInLayer (const MdcTrack *tk)
void	remove (MdcTrack *atrack)
void	setD0Cut (double d0Cut)
void	setZ0Cut (double z0Cut)
void	setPtCut (double ptCut)
void	setNoInner (bool noInnerFlag)

Additional Inherited Members
Static Public Attributes inherited from MdcTrackListBase
static double	m_d0Cut = -999.
static double	m_z0Cut = -999.
static double	m_ptCut = -999.
Protected Attributes inherited from MdcTrackListBase
MdcTrackParams	tkParam
bool	m_noInner

Detailed Description

Definition at line 31 of file InstallArea/include/MdcTrkRecon/MdcTrkRecon/MdcTrackList.h.

Constructor & Destructor Documentation

MdcTrackList() [1/2]

MdcTrackList::MdcTrackList

(

const MdcTrackParams &

tkPar

)

Definition at line 91 of file MdcTrackList.cxx.

                                                       : 
  MdcTrackListBase(tkPar) { 
    // *************************************************************************
    return;
  }

~MdcTrackList() [1/2]

MdcTrackList::~MdcTrackList

(

)

Definition at line 98 of file MdcTrackList.cxx.

{}

MdcTrackList() [2/2]

MdcTrackList::MdcTrackList

(

const MdcTrackParams &

tkPar

)

~MdcTrackList() [2/2]

MdcTrackList::~MdcTrackList

(

)

Member Function Documentation

createFromSegs() [1/2]

int MdcTrackList::createFromSegs ( MdcSegList *  segs, const MdcHitMap *  map, const MdcDetector *  gm, TrkContext &  context, double  bunchTime  )

virtual

Implements MdcTrackListBase.

Definition at line 103 of file MdcTrackList.cxx.

                                           {
  // *************************************************************************
  //Forms tracks out of list of superlayer segments
  int nTracks = 0;
 
  m_debug = tkParam.lPrint;//yzhang debug
 
  // Create empty list of stereo segs (to save time)
  MdcSegGrouperSt stereoSegs(gm, tkParam.lPrint);
  stereoSegs.setNoInner(m_noInner);//yzhang add 2016-10-12 
 
  // *** Create r-phi track
 
  // Create list of axial segments, treated as on tracks from origin
#ifdef MDCPATREC_TIMETEST
  TAU_PROFILE_TIMER(timer8,"fill ax seg", "int ()", TAU_DEFAULT);
  TAU_PROFILE_START(timer8);
#endif
  MdcSegGrouperAx origSegs(gm, tkParam.lPrint);
  origSegs.fillWithSegs(segs);
  //std::cout << "Plot segs after ax fillWithSegs " << std::endl;//yzhang debug 
  //segs->plot(0);//yzhang debug
#ifdef MDCPATREC_TIMETEST
  TAU_PROFILE_STOP(timer8);
#endif
  MdcSeg *seed;
  bool goodOnly = true;
  bool useBad = (segs->count() < 400);  // if true, use non-good seeds 
  //bool useBad = false;
  segs->resetSeed(gm); 
  MdcTrack *trialTrack = 0;
 
  while (1) {
    seed = segs->getSeed(0,goodOnly);
    if (seed == 0 && goodOnly && useBad) {
      segs->resetSeed(gm);
      goodOnly = false;
      continue;
    }
    else if (seed == 0 && (!goodOnly || !useBad)) {
      break;
    }
 
    if (3 == m_debug) dumpSeed(seed, goodOnly);//yzhang debug
 
    // Pass through first superlayer of MDC required, Field layer No5 = 12.135 cm
    if ( fabs( ((MdcSegInfoAxialO *) seed->info())->curv()) > 0.0417) continue;//curv cut yzhang 
    delete trialTrack;
    trialTrack = 0;
 
    //---------Combine Ax segs--------
#ifdef MDCPATREC_TIMETEST
    TAU_PROFILE_TIMER(timer3,"combine ax seg", "int ()", TAU_DEFAULT);
    TAU_PROFILE_START(timer3);
#endif
    int success = origSegs.combineSegs(trialTrack, seed, context, bunchTime, 
    tkParam.maxSegChisqO);
#ifdef MDCPATREC_TIMETEST
    TAU_PROFILE_STOP(timer3);
#endif
 
 
    if (3 <= m_debug){
      cout<<" ***** Ax.combineSegs success?  " << success<<"\n";
      dumpAxCombine(trialTrack);//yzhang debug
    }
    if (!success) continue;     
 
 
    //--------Finish circle-------- 
#ifdef MDCPATREC_TIMETEST
    TAU_PROFILE_TIMER(timer4,"circle fitting", "int ()", TAU_DEFAULT);
    TAU_PROFILE_START(timer4);
#endif
    success = finishCircle(*trialTrack, map, gm);
#ifdef MDCPATREC_TIMETEST
    TAU_PROFILE_STOP(timer4);
#endif
 
    if (3 <= m_debug){
      cout<<"finishCircle success?  " << success<<"\n";
      dumpCircle(trialTrack);//yzhang debug
    }
 
    if (!success) continue;
    //--------Make sure it really did come from origin--------
    const TrkFit* tkFit = trialTrack->track().fitResult();
    assert (tkFit != 0);
    TrkExchangePar par = tkFit->helix(0.0);
    //dumpD0(par);
 
    //------------------d0 cut-------------------
    // 2010-03-31 , m_d0Cut from 0 to epsilon
 
    //std::cout<<  __FILE__ <<"  d0 cut------------"<< fabs(par.d0())<<" d0cut "<< m_d0Cut << std::endl;
    if ( (m_d0Cut > Constants::epsilon) && (fabs(par.d0()) > m_d0Cut) ){
      if (tkParam.lPrint>1)cout<<__FILE__<<" Killing track by d0:" <<par.d0()<<">"<<m_d0Cut << endl;
      continue;
    }
 
    //------------------pt cut-------------------
    if ( (fabs(m_ptCut)>0.) && (fabs(tkFit->pt(0.)) < m_ptCut) ){
      if (tkParam.lPrint>1)cout<<__FILE__<<" Killing track by pt:" <<tkFit->pt(0.)<<"<"<<m_ptCut << endl;
      continue;
    }
 
    // *** End r-phi track-finding
    if (3 <= m_debug) std::cout << " *** End r-phi track-finding "<<std::endl;
 
    //--------Add stereo to taste--------
#ifdef MDCPATREC_TIMETEST
    TAU_PROFILE_TIMER(timer5,"fill st seg", "int ()", TAU_DEFAULT);
    TAU_PROFILE_START(timer5);
#endif
    stereoSegs.fillWithSegs(segs, trialTrack);
#ifdef MDCPATREC_TIMETEST
    TAU_PROFILE_STOP(timer5);
#endif
    if (3 <= m_debug){
      //dumpStFill();//yzhang debug
      std::cout<<std::endl<<"----------------------------------------"<<  std::endl;
      std::cout<<" Segment list after St.fillWithSegs "<<  std::endl;
      stereoSegs.dumpSegList();
    }
 
#ifdef MDCPATREC_TIMETEST
    TAU_PROFILE_TIMER(timer6,"combine st seg", "int ()", TAU_DEFAULT);
    TAU_PROFILE_START(timer6);
#endif
    success = stereoSegs.combineSegs(trialTrack, 0, context, bunchTime, 
    tkParam.maxSegChisqO, tkParam.combineByFitHits);
#ifdef MDCPATREC_TIMETEST
    TAU_PROFILE_STOP(timer6);
#endif
 
    if (3 <= m_debug){
      cout<<" ***** St.combineSegs success?  " << success<<"\n";
      dumpStCombine(trialTrack);
    }
 
 
    //--------Finish 3-d track--------
    if (success) {
#ifdef MDCPATREC_TIMETEST
      TAU_PROFILE_TIMER(timer7,"helix fitting", "int ()", TAU_DEFAULT);
      TAU_PROFILE_START(timer7);
#endif
      success = finishHelix(*trialTrack, map, gm);
#ifdef MDCPATREC_TIMETEST
      TAU_PROFILE_STOP(timer7);
#endif
    }  // end if (success -- st)
 
    if (3 == m_debug){
      dumpHelix(trialTrack);
    }
    if (!success) continue;
 
    //------------------d0 cut after helix fitting-------------------
    //yzhang add 2011-08-01 
    double d0par = trialTrack->track().fitResult()->helix(0.).d0();
    if ( (m_d0Cut > Constants::epsilon) && (fabs(d0par) > m_d0Cut) ){
      if (tkParam.lPrint>1) {cout<<__FILE__
    <<" Killing track by d0 after 3d fit:" <<d0par<<">"<<m_d0Cut << endl;}
      continue;
    }
 
    double z0par = trialTrack->track().fitResult()->helix(0.).z0();
    if ( (m_z0Cut > Constants::epsilon) && (fabs(z0par) > m_z0Cut) ){
      if (tkParam.lPrint>1) {cout<<__FILE__
    <<" Killing track by z0:" <<z0par<<">"<<m_z0Cut << endl;}
      continue;
    }
 
 
    nTracks++;
    append(trialTrack);    // Add to list of Tracks
 
    trialTrack = 0;
 
    if (3 == m_debug) std::cout << " ***** End one track-finding *****"<<std::endl;
  }  // end while(1)   
 
  delete trialTrack;
  return nTracks;
 
}

createFromSegs() [2/2]

int MdcTrackList::createFromSegs ( MdcSegList *  segs, const MdcHitMap *  , const MdcDetector *  , TrkContext &  , double  bunchTime  )

virtual

Implements MdcTrackListBase.

dropMultiHotInLayer() [1/2]

void MdcTrackList::dropMultiHotInLayer

(

const MdcTrack *

tk

)

Definition at line 1152 of file MdcTrackList.cxx.

                                                        {
  double tdr[43];
  double tdr_wire[43];
  for(int i=0; i<43; i++){tdr[i]=9999.;}
 
  // make flag
  TrkHotList::hot_iterator hotIter= tk->track().hits()->hotList().begin();
  while (hotIter!=tk->track().hits()->hotList().end()) {
    MdcHitOnTrack* hot = const_cast<MdcHitOnTrack*> (&(*hotIter->mdcHitOnTrack()));
 
    //driftTime(tof,z)
    double dt = hot->mdcHit()->driftTime(0.,0.);
    int layer = hot->mdcHit()->layernumber();
    int wire = hot->mdcHit()->wirenumber();
    if (dt < tdr[layer]) {
      tdr[layer] = dt;  
      tdr_wire[layer] = wire;  
    }
    hotIter++;
  }
 
  std::cout<<" tdr wire ";
  for(int i=0;i<43;i++){
    std::cout<<i<<" "<<tdr[i]<<" "<<tdr_wire<<" ";
  }
  std::cout<<" "<<  std::endl;
  // inactive multi hit 
  hotIter= tk->track().hits()->hotList().begin();
  while (hotIter!=tk->track().hits()->hotList().end()) {
    int layer = hotIter->mdcHitOnTrack()->mdcHit()->layernumber();
    int wire = hotIter->mdcHitOnTrack()->mdcHit()->wirenumber();
    double dt = hotIter->mdcHitOnTrack()->mdcHit()->driftTime(0.,0.);
 
    if ((tdr[layer] <9998.) && (tdr_wire[layer]!=wire)){
      MdcHitOnTrack* hot = const_cast<MdcHitOnTrack*> (&(*hotIter->mdcHitOnTrack()));
      hot->setActivity(false);
 
      std::cout<<__FILE__<<" inactive "<< layer<<" "<<wire<<" dt "<<dt <<  std::endl;
    }
    hotIter++;
  }
}

dropMultiHotInLayer() [2/2]

void MdcTrackList::dropMultiHotInLayer

(

const MdcTrack *

tk

)

dumpAxCombine() [1/2]

void MdcTrackList::dumpAxCombine

(

const MdcTrack *

trialTrack

)

Definition at line 1058 of file MdcTrackList.cxx.

                                                            {
  if (NULL == trialTrack) return;
  std::cout<<std::endl<< "-------------------------------------"<<std::endl;
  std::cout<<"Track and hitList after AxCombine "<<std::endl;
  trialTrack->track().printAll(cout);//yzhang debug
  TrkHotList::hot_iterator hotIter= trialTrack->track().hits()->hotList().begin();
  while (hotIter!=trialTrack->track().hits()->hotList().end()) {
    cout <<"(" <<((MdcHit*)(hotIter->hit()))->layernumber()
      <<","<<((MdcHit*)(hotIter->hit()))->wirenumber() 
      <<":"<<hotIter->isActive()<<")  ";
    hotIter++;
  }
  std::cout << std::endl;
  std::cout<< "-------------------------------------"<<std::endl;
}

Referenced by createFromSegs().

dumpAxCombine() [2/2]

void MdcTrackList::dumpAxCombine

(

const MdcTrack *

)

dumpAxFill() [1/2]

void MdcTrackList::dumpAxFill

(

const MdcTrack *

trialTrack

)

Definition at line 1045 of file MdcTrackList.cxx.

                                                          {
  std::cout << "ax fill: "<<std::endl; 
  if(!trialTrack){
    trialTrack->track().printAll(cout);//yzhang debug
  }
}

dumpAxFill() [2/2]

void MdcTrackList::dumpAxFill

(

const MdcTrack *

)

dumpCircle() [1/2]

void MdcTrackList::dumpCircle

(

const MdcTrack *

trialTrack

)

Definition at line 1074 of file MdcTrackList.cxx.

                                                        {
  if(NULL == trialTrack) return;
  if (!trialTrack->track().fitResult()) return;
  /*
     double omega,r,pt;
     omega =trialTrack->track().fitResult()->helix(0.0).omega();
     if (omega == 0) pt = 0;
     else pt = (-1) * 1/(omega * 333.576 );
     std::cout<<"in MdcTrackList Circle Pt = "<< pt <<std::endl;//yzhang deubg
 
     if (omega == 0) r=0;
     else r = 1/ omega;
     std::cout<<"in MdcTrackList Circle R = "<< r <<std::endl;//yzhang deubg 
     */
  std::cout<<std::endl<< "-------------------------------------"<<std::endl;
  std::cout << "Track and hitList after finishCircle" << std::endl;
  trialTrack->track().printAll(cout);
  TrkHotList::hot_iterator hotIter= trialTrack->track().hits()->hotList().begin();
  while (hotIter!=trialTrack->track().hits()->hotList().end()) {
    cout <<"(" <<((MdcHit*)(hotIter->hit()))->layernumber()
      <<","<<((MdcHit*)(hotIter->hit()))->wirenumber() 
      <<":"<<hotIter->isActive()<<")  ";
    hotIter++;
  }
  cout <<endl;
  std::cout<< "-------------------------------------"<<std::endl;
}

Referenced by createFromSegs().

dumpCircle() [2/2]

void MdcTrackList::dumpCircle

(

const MdcTrack *

)

dumpD0() [1/2]

void MdcTrackList::dumpD0

(

const TrkExchangePar &

par

)

Definition at line 1102 of file MdcTrackList.cxx.

                                                    {
  //yzhang hist
  //m_hd0->fill(par.d0());
  //m_d0 = par.d0();
  //  m_tuple1->write();//yzhang hist
  std::cout <<std::endl<< " Dump d0()  " << par.d0()<<"\n";//yzhang debug
 
  //zhangy hist
}

dumpD0() [2/2]

void MdcTrackList::dumpD0

(

const TrkExchangePar &

)

dumpHelix() [1/2]

void MdcTrackList::dumpHelix

(

const MdcTrack *

trialTrack

)

Definition at line 1134 of file MdcTrackList.cxx.

                                                       { 
  std::cout<< std::endl<<"-------------------------------------"<<std::endl;
  std::cout<< "Track and hitList after finishHelix " << std::endl;
  trialTrack->track().printAll(cout);
  TrkHotList::hot_iterator hotIter= trialTrack->track().hits()->hotList().begin();
  int tmplay = -1;
  while (hotIter!=trialTrack->track().hits()->hotList().end()) {
    int layer = ((MdcHit*)(hotIter->hit()))->layernumber();
    if( (layer%4) ==0 ) { if( tmplay != layer ) cout<<endl; }
    cout <<"(" <<layer <<","<<((MdcHit*)(hotIter->hit()))->wirenumber()
      <<":"<<hotIter->isActive() <<")  ";
    hotIter++;
    tmplay = layer;
  }
  cout <<endl;
  std::cout<< "-------------------------------------"<<std::endl;
}

Referenced by createFromSegs().

dumpHelix() [2/2]

void MdcTrackList::dumpHelix

(

const MdcTrack *

)

dumpSeed() [1/2]

void MdcTrackList::dumpSeed	(	const MdcSeg *	seed,
		bool	goodOnly
	)

Definition at line 1052 of file MdcTrackList.cxx.

                                                              {
  std::cout << std::endl<<"Dump seed segment goodOnly="<<goodOnly<<" ";
  seed->plotSegAll();
  std::cout<< std::endl;
}

Referenced by createFromSegs().

dumpSeed() [2/2]

void MdcTrackList::dumpSeed	(	const MdcSeg *	seed,
		bool	goodOnly
	)

dumpStCombine() [1/2]

void MdcTrackList::dumpStCombine

(

const MdcTrack *

trialTrack

)

Definition at line 1117 of file MdcTrackList.cxx.

                                                            {
  std::cout<<std::endl<< "-------------------------------------"<<std::endl;
  std::cout<<"Track and hitList after StCombine "<<std::endl;
  if(trialTrack)trialTrack->track().printAll(cout);
  TrkHotList::hot_iterator hotIter= trialTrack->track().hits()->hotList().begin();
  int tmplay = -1;
  while (hotIter!=trialTrack->track().hits()->hotList().end()) {
    int layer = ((MdcHit*)(hotIter->hit()))->layernumber();
    if( (layer%4) ==0 ) { if( tmplay != layer ) cout<<endl; }
    cout <<"(" <<layer <<","<<((MdcHit*)(hotIter->hit()))->wirenumber()
      <<" act:"<<hotIter->isActive() <<" lr:"<<hotIter->ambig() <<")  ";
    hotIter++;
    tmplay=layer;
  }
  cout <<endl;
  std::cout<< "-------------------------------------"<<std::endl;
}

Referenced by createFromSegs().

dumpStCombine() [2/2]

void MdcTrackList::dumpStCombine

(

const MdcTrack *

)

dumpStFill() [1/2]

void MdcTrackList::dumpStFill

(

)

Definition at line 1111 of file MdcTrackList.cxx.

                              {
  std::cout << "Plot segs after st fillWithSegs " << std::endl;
  cout <<endl;
 
}

dumpStFill() [2/2]

void MdcTrackList::dumpStFill

(

)

finishCircle() [1/2]

int MdcTrackList::finishCircle	(	MdcTrack &	track,
		const MdcHitMap *	map,
		const MdcDetector *	gm
	)

Definition at line 952 of file MdcTrackList.cxx.

                     {
  //************************************************************************
  TrkRecoTrk& trk = mdcTrk.track();
  if(9==tkParam.lPrint){
    std::cout << " finishCircle "<< std::endl;
    trk.print(std::cout);
  }
 
  const TrkFit* tkFit = trk.fitResult();
  if(9==tkParam.lPrint){  cout << "Before circle fit, nactive " << tkFit->nActive() << endl;}
  assert (tkFit != 0);
  TrkHitList* hitList = trk.hits();
  assert (hitList != 0);
  TrkCircleMaker circMaker;
  circMaker.setFlipAndDrop(trk, false, false);    // reset as a precaution
  //circMaker.setFactor(trk, 1.);//nSigma cut factor//yzhang FIXME 2010-09-13 
 
  TrkErrCode fitResult = hitList->fit();
  if (fitResult.failure()) {
    trk.status()->addHistory(TrkErrCode(TrkErrCode::fail,15,"finishCircle"),"MdcTrkRecon");
    if (tkParam.lPrint > 1) {
      cout << "First circle fit failed: " << endl;
      fitResult.print(std::cout); 
    }
    return 0;
  }
  trk.status()->addHistory(TrkErrCode(TrkErrCode::succeed,15,"finishCircle"),"MdcTrkRecon");
 
  if(9==tkParam.lPrint){ cout << "After circle fit, nactive " << tkFit->nActive() << endl;}
  double chisqperDOF;
  int nDOF = tkFit->nActive() - 3;
  if (nDOF > 3){
    chisqperDOF = tkFit->chisq() / nDOF;
  }else{
    chisqperDOF = tkFit->chisq();
  }
 
  if(g_cirTkChi2) { g_cirTkChi2->fill( chisqperDOF ); }//yzhang hist cut
  int success = (chisqperDOF <= tkParam.maxChisq && tkFit->nActive() >= 3);
 
  if(9==tkParam.lPrint){
    std::cout<<__FILE__<<" "<<__LINE__
      << " success "<<success
      << " chisqperDOF "<< chisqperDOF<<"<? maxChisq "<< tkParam.maxChisq
      << " nAct "<<tkFit->nActive()<<">=3 "
      << std::endl;
    mdcTrk.track().hots()->printAll(std::cout);
  }
  bool lcurler(fabs(tkFit->helix(0).omega()) > 3.4);//yzhang FIXME, ??
  pickHits(&mdcTrk, map, gm, lcurler);
 
  if(9==tkParam.lPrint){
    std::cout<< __FILE__ << "   " << __LINE__ << " nHit after pickHit  "<<hitList->nHit() <<std::endl;
  }
  //if(hitList->nHit()<=0) return 0;
 
  circMaker.setFlipAndDrop(trk, true, true); 
  fitResult = hitList->fit();
  if (fitResult.failure()) {
    if(9==tkParam.lPrint){
      cout << "Second circle fit failed: " << endl;
      fitResult.print(std::cout); 
    }
    return 0;
  }
  if(9==tkParam.lPrint){
    cout << "Final fit: " << endl << trk << endl;
  }
  circMaker.setFlipAndDrop(trk, false, false); 
 
  nDOF = tkFit->nActive() - 3;
  if (nDOF > 3) {
    chisqperDOF = tkFit->chisq() / nDOF;
  }
  else {
    chisqperDOF = tkFit->chisq();
  }
  if(g_cirTkChi2) { g_cirTkChi2->fill( chisqperDOF ); }//yzhang hist cut
  success = (chisqperDOF <= tkParam.maxChisq)  && (tkFit->nActive() >= 3);
 
  if(9==tkParam.lPrint){
    cout << "chisqperDOF "<<chisqperDOF<<"=?" << tkParam.maxChisq<< endl;
    cout << "nActive "<<tkFit->nActive()<<">= 3"<< endl;
  }
 
  if(9==tkParam.lPrint){
    trk.printAll(cout);
  }
 
  return success;
}

Referenced by createFromSegs().

finishCircle() [2/2]

int MdcTrackList::finishCircle	(	MdcTrack &	track,
		const MdcHitMap *	,
		const MdcDetector *
	)

finishHelix() [1/2]

int MdcTrackList::finishHelix	(	MdcTrack &	track,
		const MdcHitMap *	map,
		const MdcDetector *	gm
	)

Definition at line 864 of file MdcTrackList.cxx.

                     {
  //***********************************************************************
  int success = 1;
 
  TrkRecoTrk& trk = mdcTrk.track();
  TrkErrCode fitResult;
  TrkHelixMaker helMaker;
  const TrkFit* tkFit = trk.fitResult();
  assert (tkFit != 0);
  TrkHitList* hitList = trk.hits();
  assert (hitList != 0);
  TrkExchangePar par = tkFit->helix(0.0);
 
 
  helMaker.setFlipAndDrop(trk, true, true);
  fitResult = hitList->fit();
 
  if (!fitResult.success() && (3 == tkParam.lPrint)) {
    cout << "Helix fit failure: " << endl;
    fitResult.print(cout); 
  }
  helMaker.setFlipAndDrop(trk, false, false);
 
  if (!fitResult.success()) return 0;
 
  bool lcurler(fabs(tkFit->helix(0).omega()) > 3.4);//yzhang FIXME, ??
  pickHits(&mdcTrk, map, gm, lcurler);//yzhang add 2010-05-10 
 
  if(3==tkParam.lPrint) std::cout<< __FILE__ << "   " << __LINE__ << " nHit after pickHit  "<<hitList->nHit() <<std::endl;
  if(3==tkParam.lPrint) hitList->hotList().printAll(std::cout);
  //if(hitList->nHit()<=0) return 0;
 
  helMaker.setFlipAndDrop(trk, true, true); 
  fitResult = hitList->fit();
  if (fitResult.failure()) {
    if(3==tkParam.lPrint){
      cout << "Second helix fit failed: " << endl;
      fitResult.print(std::cout); 
    }
    return 0;
  }
  if(3==tkParam.lPrint){ cout << "Final fit: " << endl << trk << endl; }
  helMaker.setFlipAndDrop(trk, false, false); 
 
  double chisqperDOF = 0.;
  int nACT = tkFit->nActive();
  int nDOF = nACT - 5;
  if (nDOF > 5) {
    chisqperDOF = tkFit->chisq() / nDOF;
  } else {
    chisqperDOF = tkFit->chisq();
  }
  if(g_3dTkChi2) { g_3dTkChi2->fill( chisqperDOF ); }//yzhang hist cut
  if(g_fitNAct) { g_fitNAct->fill(nACT ); }//yzhang hist cut
 
  int goodMatch = 1;
  if (fitResult.failure() || chisqperDOF > tkParam.maxChisq || nACT < tkParam.minHits ) {
    goodMatch = 0;
    if (3 == tkParam.lPrint) {
      std::cout<<" goodMatch=0; chi2/dof "<<chisqperDOF <<" >?maxChisq"<<tkParam.maxChisq 
    <<" nAct:"<<nACT <<"<?minHits"<<tkParam.minHits <<  std::endl;
    }
  }
  //yzhang add
  ////yzhang FIXME
  //if (tkParam.lUseQualCuts) {
  //double tem2 = (float) trk.hits()->nHit() - nACT;
  //if (tem2 >= tkParam.maxNmissTrack) goodMatch = 0;
  //if (tem2 / float(trk.hits()->nHit()) > tkParam.maxNmissNorm) 
  //goodMatch = 0;
  //}
  //zhangy add
 
  if (goodMatch) {
    if(3 <= m_debug){std::cout<<" ***** finishHelix success!"<<  std::endl;}
    trk.fitResult()->positionErr(0.0);
  } else { // Not a good match
    success = 0;
    if(3 <= m_debug){std::cout<<" ***** finishHelix failure!"<<  std::endl;}
  }  // end if goodmatch
 
  return success;
}

Referenced by createFromSegs().

finishHelix() [2/2]

int MdcTrackList::finishHelix	(	MdcTrack &	track,
		const MdcHitMap *	,
		const MdcDetector *
	)

pickHits() [1/2]

int MdcTrackList::pickHits	(	MdcTrack *	trk,
		const MdcHitMap *	map,
		const MdcDetector *	gm,
		bool	pickAmb = true
	)

!! change to using omega itself

Definition at line 296 of file MdcTrackList.cxx.

                                        {
 
  /***************************************************************************/
 
  // Selects candidate hits along track; 
  // sorts them into "active" (small residual) and "inactive" (large resid);
  // throws away hits separated from main group by large gaps. //?? FIXME
  // pickAm => pick the ambiguity for hits already on track
  // Return # of active hits found
 
  bool is2d = trk->track().status()->is2d();
  if(6==tkParam.lPrint){
    cout << "Before pickHits";
    if (is2d) cout<<" 2d:";
    else cout<<" 3d:";
    cout<< endl;
  }
 
  int nFound = 0;
  int nCand = 0;        // cells tried 
  double rMin, rMax;    // min & max search radii for this track
  double rEnter, rExit;    // radii at which track enters, exits layer
  BesAngle phiEnter, phiExit;//yzhang change
  int wireLow, wireHigh;
  double phiLow, phiHigh;
  int nCell;
  MdcHit *thisHit;
  HepAList<MdcHitOnTrack> localHistory;    //temporary list of added hits
  //until bogus hits are chucked
  double cellWidth;
  double goodDriftCut;  // missing hits with predDrift > goodDriftCut don't count in figuring gaps
  double aresid = 0.;    // = abs(resid)
  int firstInputHit = -1; //first hit in firstInputLayer/lastInputLayer region
  int lCurl = 0;   // reached curl point
 
  //****************************************************/
  const MdcLayer *firstInputLayer = trk->firstLayer();
  const MdcLayer *lastInputLayer = trk->lastLayer();
 
  double bunchTime = trk->track().trackT0();
  const TrkFit* tkFit = trk->track().fitResult();
  assert (tkFit != 0);
  const TrkFitStatus* tkStatus = trk->track().status();
  assert (tkStatus != 0);
  TrkHitList* hitList = trk->track().hits();
  assert (hitList != 0);
  TrkExchangePar par = tkFit->helix(0.0);
  double d0 = par.d0();
  double curv = 0.5 * par.omega();   //!!! change to using omega itself
  double sinPhi0 = sin(par.phi0());
  double cosPhi0 = cos(par.phi0());
 
  // *** Set min and max radius for track
  rMin = gm->firstLayer()->rIn();   
  double absd0 = fabs(d0);
  if (absd0 > rMin) rMin = absd0 + Constants::epsilon;
 
  bool willCurl = false;
  double rCurl = fabs(d0 + 1./curv);
  rMax = gm->lastLayer()->rOut(); 
  //std::cout<<  __FILE__ <<"  "<< __LINE__<<" rCurl "<< rCurl <<" rMax "<< rMax << std::endl;
  if (rCurl < rMax) {
    willCurl = true;
    rMax = rCurl - Constants::epsilon;
  }
  //std::cout<<" willCurl "<< willCurl  << std::endl;
  bool reachedLastInput = false;
  bool hasCurled = false;  // hit found past curl point
 
  //yzhang add skip layer with hot, 2011-05-03 
  bool isHotOnLayer[43];
  if(tkParam.pickSkipExistLayer){
    for(int ii=0; ii<43; ii++) isHotOnLayer[ii]=false;
    for (TrkHitList::hot_iterator ihit(hitList->begin()); ihit != hitList->end(); ++ihit){
      isHotOnLayer[ihit->layerNumber()]=true;
    }
  }
 
  // *** Loop through layers in view, looking for the hits
  // assumes axial inner
  for (const MdcLayer *layer = gm->firstLayer(); layer != 0; 
      layer = ((!lCurl) ? ( (hasCurled) ? gm->prevLayer(layer) : 
      gm->nextLayer(layer)) : layer) ) {  
 
 
    if (lCurl) {
      lCurl = 0;
      hasCurled = true;
    }
    if (tkStatus->is2d() && layer->view() != 0) continue;
 
    if(tkParam.pickSkipExistLayer &&  isHotOnLayer[layer->layNum()]) continue;//yzhang add 2011-05-03 
 
    //std::cout<<  __FILE__ <<"  "<< __LINE__  << " lCurl "<< lCurl
    //<<" hasCurled "<< hasCurled <<" layer "<< layer->layNum() << std::endl;
    bool lContinue = true;
    if(tkParam.pickUitlLastLayer) {//yzhang change 2010-09-10 
      if (layer == lastInputLayer) reachedLastInput = true; 
    }
 
    // *** Find enter and exit points
    if (hasCurled) {
      rEnter = layer->rOut();
      if (rEnter < rMin) {
    //std::cout<<  __FILE__ <<"  "<< __LINE__  
    //<<" rEnter<rMin "<<rEnter<<" "<<rMin<< std::endl;
    break;
      }
      rExit = layer->rIn();
      if (rExit < rMin) rExit = rMin;
      if (rEnter > rMax) rEnter = rMax;
 
      //std::cout<<  __FILE__ <<" hasCurled: rEnter  "<< rEnter 
      //<<" rExit " << rExit << " rMin "<<rMin<<" rMax "<<rMax<< std::endl;
    } else {
      rEnter = layer->rIn();
      rExit = layer->rOut();
      //std::cout<<  __FILE__ <<" NOT hasCurled: rEnter  "<< rEnter 
      //<<" rExit " << rExit << " rMin "<<rMin<<" rMax "<<rMax<< std::endl;
      if (rExit < rMin) continue;
 
      if (willCurl) {
    if (rEnter > rMax) {
      //std::cout<<  __FILE__<<" Reached curl point before entering layer"<< std::endl;
      // Reached curl point before entering layer
      hasCurled = 1;
      continue;
    }
    if (rExit > rMax) {
      lCurl = 1;
      rExit = rMax;
    }
      } else {  // not a potential curler
    //std::cout<<  __FILE__ <<"  "<< __LINE__  <<" not a potential curler"<< std::endl;
    if (rEnter > rMax) {
      //std::cout<<  __FILE__ <<" rEnter> rMax "<< rEnter << std::endl;
      break;
    }
    if (rExit > rMax) rExit = rMax;
      }
    }  // end if curled already
 
    nCell = layer->nWires();
    cellWidth = Constants::twoPi * layer->rMid() / nCell;//??
    // don't count outer xmm of cell
    goodDriftCut = 0.5 * cellWidth * M_SQRT2 + tkParam.pickHitMargin;  
    //goodDriftCut = 0.5 * cellWidth - tkParam.pickHitMargin;//yzhang change 2012-08-17 
    double deltaPhiCellWidth = 0.5 * (cellWidth * M_SQRT2)/layer->rMid(); 
 
    //**** Find entrance and exit phi's
    BesAngle phiTemp(0.0);
    int ierror = trk->projectToR(rEnter, phiTemp, hasCurled);
    phiEnter = phiTemp.posRad();
    if (ierror != 0) {
      if(6==tkParam.lPrint) std::cout<< " ErrMsg(warning) " 
    << "Error in MdcTrackList::pickHits projection, ierror " <<ierror<< std::endl;
      continue;//yzhang 2011-04-14 
    }
    ierror = trk->projectToR(rExit, phiTemp, hasCurled);
    phiExit = phiTemp.posRad();
    if (ierror != 0) {
      if(6==tkParam.lPrint) std::cout<< " ErrMsg(warning) " 
    << "Error in MdcTrackList::pickHits projection, ierror "<<ierror << std::endl;
      continue;//yzhang 2011-04-14 
    }
 
 
    if(6==tkParam.lPrint){
      std::cout<< endl<<"--pickHit of layer "<<layer->layNum()<<"--"<<std::endl;
      std::cout<< "  track phiEnter "<< phiEnter.deg()<<" phiExit "<<phiExit.deg()<<" degree"<< std::endl;
      std::cout<< "  cell width "<< 360./layer->nWires()<<" dPhiz "<<layer->dPhiz()*Constants::radToDegrees <<" deltaPhiCellWidth "<<0.5 * (cellWidth * M_SQRT2)/layer->rMid() * Constants::radToDegrees<<std::endl;
      std::cout<< "  maxInactiveResid "<< tkParam.maxInactiveResid <<" pickHitPhiFactor "<<tkParam.pickHitPhiFactor<< std::endl;
      std::cout<< "  goodDriftCut "<< goodDriftCut <<"=sqrt(2)*0.5*"<<cellWidth<<"+"<<tkParam.pickHitMargin<< std::endl;
    }
 
    double Bz = trk->track().bField().bFieldZ();
    //std::cout<<  " facotr "<<tkParam.pickHitPhiFactor<< " dPhiz "<<layer->dPhiz()
    //<< " factor*dPhiz "<<layer->dPhiz()*tkParam.pickHitPhiFactor<< std::endl;
    double t_phiHit = -999.;
    if (curv*Bz <= 0.0) {
      //positive track in minus Bz
      phiLow = phiEnter;
      phiHigh = phiExit;
      // Allow some slop in phi
      phiLow -= tkParam.maxInactiveResid / rEnter;
      phiHigh += tkParam.maxInactiveResid / rExit;
    } else {
      phiLow = phiExit;
      phiHigh = phiEnter;
      phiLow -= tkParam.maxInactiveResid / rExit;
      phiHigh += tkParam.maxInactiveResid / rEnter;
    }   
    //yzhang fix cross x axis bug 2011-04-10 
    if((phiHigh>0 && phiLow<0)){
      phiLow += Constants::twoPi;
    }else if((phiHigh<0 && phiLow>0)){
      phiHigh += Constants::twoPi;
    }
 
    double lowFloat = nCell /Constants::twoPi * (phiLow - layer->phiOffset()) + 0.5;
    double highFloat = nCell /Constants::twoPi * (phiHigh  - layer->phiOffset()) + 0.5;
    wireLow = (lowFloat >= 0.0) ? int(lowFloat) : int(floor(lowFloat));
    wireHigh = (highFloat >= 0.0) ? int(highFloat) : int(floor(highFloat));
 
    if(6==tkParam.lPrint){
      std::cout << "  wireLow "<<wireLow << " wireHigh "<<wireHigh <<" phiLow "<<phiLow*180./Constants::pi << " phiHigh "<<phiHigh*180./Constants::pi <<  std::endl;
    }
    // *** Loop through the predicted hit wires
    int tempDiff = 0;
    if(g_pickHitWire) { 
      int tempN = Constants::maxCell[layer->layNum()];
      if(wireLow>tempN/2. && wireHigh<tempN/2.){
    g_pickHitWire->fill(wireHigh+tempN - wireLow); 
    tempDiff = wireHigh+tempN - wireLow +1;
      }else{
    g_pickHitWire->fill(wireHigh - wireLow); 
    tempDiff = wireHigh - wireLow +1;
      }
    }//yzhang hist cut
 
    if(wireLow>wireHigh) wireLow -= nCell;//yzhang 2011-05-16 
    long t_iHit = 0;
    for (int thisWire = wireLow; thisWire <= wireHigh; thisWire++) {
      int corrWire = mdcWrapWire(thisWire, nCell);
      thisHit = map->hitWire(layer->layNum(), corrWire);
 
      if(6==tkParam.lPrint){
    if(thisHit != 0) {cout<<endl<<"test hit "; thisHit->print(std::cout);}
    else std::cout << endl<<"test hit ("<<layer->layNum()<<","<<corrWire<<")"<< std::endl;
      }
 
      double tof = 0.;
      double z = 0.;
      double driftDist = 0.;
      // Calculate expected drift distance
      double delx, dely;
      double resid = 0., predDrift = 0.;
      int ambig = 0;
      const MdcHitOnTrack *alink = 0;
      double mcTkId = -9999; //yzhang for tuple 2011-06-28 
      if (thisHit == 0 ) {
    delx = -d0 * sinPhi0 - layer->xWire(corrWire);
    dely =  d0 * cosPhi0 - layer->yWire(corrWire);
    predDrift = cosPhi0 * dely - sinPhi0 * delx + 
      curv * (delx * delx + dely * dely);
    if(6==tkParam.lPrint) cout<<"No hit. predDrift="<<predDrift<<endl;
    continue;
      } else {  
    if(m_tuplePick) mcTkId = thisHit->digi()->getTrackIndex();
    // look for existing hit
    if(thisHit->getHitOnTrack(&(trk->track())) ==0){
      alink = 0;//yzhang temp
    }else{
      alink = thisHit->getHitOnTrack(&(trk->track()))->mdcHitOnTrack();//yzhang temp
      if(6==tkParam.lPrint) { cout << " existing hot; " ;}
    }
 
    if (alink == 0 || pickAm) {
      if ((!tkStatus->is2d()) && layer->view() != 0){
        double rc = 9999.;
        if(fabs(par.omega())>Constants::epsilon) rc = 1./fabs(par.omega());
        double rw = layer->rMid();
        double alpha = acos(1 - rw*rw/(2*rc*rc));
        double fltLen = rw;
        if(fabs(1 - rw*rw/(2*rc*rc))<1) fltLen = rc * alpha;
        z = par.z0() + fltLen* par.tanDip();
        tof = fltLen / Constants::c;
        double x = layer->getWire(corrWire)->xWireDC(z);
        double y = layer->getWire(corrWire)->yWireDC(z);
        delx = -d0 * sinPhi0 - x;
        dely =  d0 * cosPhi0 - y;
        if(m_tuplePick) t_phiHit = thisHit->phi(z);
      }else{
        delx = -d0 * sinPhi0 - thisHit->x();
        dely =  d0 * cosPhi0 - thisHit->y();
        if(m_tuplePick) t_phiHit = thisHit->phi();
      }
      predDrift = cosPhi0 * dely - sinPhi0 * delx + 
        curv * (delx * delx + dely * dely);
 
      // predDrift = predDrift * (1. - curv() * predDrift);
      ambig = (predDrift >= 0) ? 1 : -1;
      if (hasCurled) ambig = -ambig;
      double entranceAngle=0.;
      driftDist = thisHit->driftDist(tof+bunchTime,ambig,entranceAngle,0.,z);
      if (alink == 0) {
        // FIXME: is this ambig here VVVVV OK for incoming tracks?
        resid = ambig * fabs(driftDist) - predDrift;
        aresid = fabs(resid);
        //if (aresid > tkParam.maxInactiveResid ) ambig = 0;//yzhang delete 2012-10-09
      }
    } else {
      ambig = alink->ambig();
      if(6==tkParam.lPrint) cout << " pick ambig for hot"<<endl;
      if(m_tuplePick) t_phiHit = par.phi0()+par.omega()*alink->fltLen();
    }
      }
 
      //yzhang 2012-08-20 , guess phi of this hit on z
      double zGuess = par.z0() + layer->rMid() * par.tanDip();
      double phiDCz = layer->getWire(corrWire)->phiDC(zGuess);
      BesAngle phiDCzMax(phiDCz + deltaPhiCellWidth);
      BesAngle phiDCzMin(phiDCz - deltaPhiCellWidth);
 
      if(m_tuplePick && alink==0) {
    double sigma = 999.;
    if (thisHit != 0 &&alink==0) {
      double entranceAngle = 0.;
      sigma = thisHit->sigma(driftDist, ambig, entranceAngle, atan(par.tanDip()), z);
    }
    m_pickPredDrift[t_iHit] = predDrift;
    m_pickDrift[t_iHit] = driftDist;
    m_pickDriftTruth[t_iHit] = haveDigiDrift[thisHit->layernumber()][thisHit->wirenumber()];
    if(curv*Bz<=0.){
      //positive track under minus Bz
      if((phiDCzMin-phiExit>0) || (phiDCzMax-phiEnter<0)) m_pickPhizOk[t_iHit] = 0;
      else m_pickPhizOk[t_iHit] = 1;
    }else{
      if((phiDCzMin-phiEnter>0) || (phiDCzMax-phiExit<0)) m_pickPhizOk[t_iHit] = 0;
      else m_pickPhizOk[t_iHit] = 1;
    }
    m_pickZ[t_iHit] = z;
    m_pickWire[t_iHit]=thisHit->wirenumber();
    m_pickResid[t_iHit] = aresid;
    if(abs(sigma)>0.000001)  m_pickSigma[t_iHit] = sigma;
    else m_pickSigma[t_iHit] = 999.;
    double t_phiLowCut=-999.;
    double t_phiHighCut= -999.;
    if(t_phiHit > -998.){
      t_phiLowCut = (phiEnter-t_phiHit)*rEnter;
      t_phiHighCut = (phiExit-t_phiHit)*rExit;
    }
    m_pickPhiLowCut[t_iHit] = t_phiLowCut;
    m_pickPhiHighCut[t_iHit] = t_phiHighCut;
    m_pickDriftCut[t_iHit] = goodDriftCut;
    m_pickMcTk[t_iHit] = mcTkId;
    m_pickPt[t_iHit] = tkFit->pt();
    m_pickCurv[t_iHit] = curv;
    t_iHit++;
      }
 
      if(curv*Bz<=0.){
    //positive track
    if((phiDCzMin-phiExit>0) || (phiDCzMax-phiEnter<0)) {
      if(6==tkParam.lPrint){ std::cout<<" CUT by phiDCz not in phi En Ex range, curv>=0"<<std::endl; }
      continue;
    }
      }else{
    //negtive track
    if((phiDCzMin-phiEnter>0) || (phiDCzMax-phiExit<0)) {
      if(6==tkParam.lPrint){ std::cout<<" CUT by phiDCz not in phi En Ex range, curv<0"<<std::endl; }
      continue;
    }
      }
 
      // Cases
      // (0) pred drift dist > goodDriftCut, drop Hit
      if (ambig != 0 && fabs(predDrift) > goodDriftCut){//yzhang add 2012-08-17 
    if(6==tkParam.lPrint){cout<<" predDrift "<<predDrift<<">goodDriftCut "<<goodDriftCut<<endl;}
    continue;
      }
 
      // (1) No good hit, but track near cell-edge => do nothing and continue
      if (ambig == 0 && fabs(predDrift) > goodDriftCut){//yzhang 2009-11-03 add 3factor, 2011-05-30 from 3 to 2,2012-08-17 from 2 to 1
    if(6==tkParam.lPrint){
      cout<<"   ambig==0 && |predDirft| "<<fabs(predDrift) <<"> goodDriftCut "<< goodDriftCut<<endl;
      cout<<" No good hit, but track near cell-edge " <<  endl;
    }
    continue;
      }
 
 
      // (2) Hit found: 
      if (ambig != 0) {
    //yzhang changed 2009-10-19
    //if resid> maxActiveSimga * sigma do not add hits to track
    double entranceAngle = 0.;
    double sigma = thisHit->sigma(driftDist, ambig, entranceAngle, atan(par.tanDip()), z);
    double factor = tkParam.pickHitFactor;
    //yzhang delete 2012-10-09 
    //if(!is2d fabs(par.tanDip())<2) factor = (2-par.tanDip())/2 * factor;
    double residCut = tkParam.maxActiveSigma * factor * sigma;//yzhang 2012-08-21 
    //if(6==tkParam.lPrint){
      //std::cout<< "aresid "<<aresid<<" residCut "<<residCut<<" sigma "<<sigma <<" tanDip "<< par.tanDip() <<" factor "<<factor <<" tkParam.maxActiveSigma "<<tkParam.maxActiveSigma<<std::endl;
    //}
 
    if (alink == 0 && (aresid <= residCut) ) {
      if(6==tkParam.lPrint){
        cout << " (2) New hit found " <<  endl;//yzhang debug
      }
      //yzhang 2012-08-17 delete
      int isActive = 1;
      //if (aresid > residCut) isActive = 0;
      //if(6==tkParam.lPrint) {
      //  if (aresid > residCut)
      //    std::cout << "notACT, resid  "<<aresid<<" >residCut " << residCut<< std::endl;
      //}
      MdcRecoHitOnTrack tempHot(*thisHit, ambig, bunchTime);
      tempHot.setActivity(isActive);
      // Don't add active hits if they're in use.
      if (thisHit->usedHit()){
        tempHot.setUsability(false);
        if(6==tkParam.lPrint) std::cout<<   " thisHit used, setUsability false "   << std::endl;
      }
      // very crude starting point for flight length !!!! improve
      double flt = layer->rMid();
      if (hasCurled) flt = Constants::twoPi * rCurl - layer->rMid();
      flt += 0.000001 * (thisHit->x() + thisHit->y());
      tempHot.setFltLen(flt);
      if(6==tkParam.lPrint) {
        std::cout<< " aresid  "<<aresid<<"<=residCut " <<residCut<<" nSig "<<aresid/sigma<< " nSigCut "<<(tkParam.maxActiveSigma*factor)<<" factor "<<factor<<" maxActiveSigma "<<tkParam.maxActiveSigma<<" tanDip "<<par.tanDip()<<std::endl;
        std::cout<< " Append Hot  "   << std::endl;
      }
      alink = (MdcHitOnTrack*) hitList->appendHot(&tempHot);
    }else{
      if(6==tkParam.lPrint){
        if(alink!=0){  
          std::cout<< "Exist hot found"<<std::endl;
        }else if(aresid > residCut){
          thisHit->print(std::cout);
        std::cout<< " Drop hit. aresid  "<<aresid<<">residCut " <<residCut<<" nSig "<<aresid/sigma<< " nSigCut "<<(tkParam.maxActiveSigma*factor)<<" factor "<<factor<<" maxActiveSigma "<<tkParam.maxActiveSigma<<" tanDip "<<par.tanDip()<<std::endl;
        }
      }
    }
    if (!localHistory.member(const_cast<MdcHitOnTrack*>(alink))) {
      localHistory.append(const_cast<MdcHitOnTrack*>(alink));
      if (hasCurled) trk->setHasCurled();
      nFound++;
      if(6==tkParam.lPrint) std::cout<<" nFound="<<nFound<<" nCand "<<nCand<<std::endl;
      if (layer == firstInputLayer && firstInputHit < 0) {
        firstInputHit = nCand;  
      }
    } else {
      if(6==tkParam.lPrint) std::cout << "ErrMsg(warning) "<< "would have inserted identical HOT "
        "twice in history buffer" << std::endl;
    }
      }
 
      // (3) No hit found; if beyond known good region, should we continue?
      else if (ambig == 0 && reachedLastInput) {
    if(6==tkParam.lPrint) std::cout << "ambig==0 "<<std::endl;
    lContinue = false;
    int nSuccess = 0;
    int last = 8;
    if (nCand < 8) last = nCand;
    for (int i = 0; i < last; i++) {
      int j = nCand - 1 - i;
      if (localHistory[j] != 0) {
        //std::cout<<  __FILE__ <<" localHistory["<<j<<"]!=0 nSuccess++ "<<  std::endl;
        nSuccess++;
      }
      if (i == 2 && nSuccess >= 2) lContinue = true;
      if (i == 4 && nSuccess >= 3) lContinue = true;
      if (i == 7 && nSuccess >= 5) lContinue = true;
      if(6==tkParam.lPrint) cout <<i<< "  (3) No hit found; if beyond known good region " <<  endl;//yzhang debug
      if (lContinue) {
        if(6==tkParam.lPrint) std::cout<<" pickHits break by lContinue. i="<<i<<" nSuccess="<<nSuccess<< std::endl;
        break;
      }
    }  
 
    if(6==tkParam.lPrint) cout << "  (3) No hit found; if beyond known good region " <<  endl;//yzhang debug
    // if lContinue == false => there's been a gap, so quit
    if (!lContinue) {
      //std::cout<<  __FILE__ <<"  "<< __LINE__  <<" break by !lContinue "<< std::endl;
      break;
    }
    localHistory.append(0);
      } 
 
      nCand++;    
      // Update last layer:
      if (ambig != 0 && reachedLastInput) {
    if (trk->hasCurled() == 0) {
      if (thisHit->layer()->rEnd() > trk->lastLayer()->rEnd()) {
        trk->setLastLayer(thisHit->layer());
      }
    }
    else {
      if (thisHit->layer()->rEnd() < trk->lastLayer()->rEnd()) {
        trk->setLastLayer(thisHit->layer());
      }
    }
      }
 
    }  // end loop over hit wires
    if(t_iHit>0 && m_tuplePick) {
      m_pickNCell = tempDiff;
      m_pickNCellWithDigi = t_iHit;
      m_pickLayer = layer->layNum();
      m_pickIs2D = is2d;
      m_tuplePick->write();
    }
    if (!lContinue && reachedLastInput) {
      //std::cout<<  __FILE__ <<" break by !lContinue && reachedLastInput "<< std::endl;
      break;
    }
  }  // end loop over layers
 
  // Now look back at hits in early layer and see if there are any to be thrown away there.  
  bool lContinue = true;
  for (int ihit = firstInputHit; ihit >= 0; ihit--) {
    if (localHistory[ihit] != 0) {
      if (lContinue) {
    // Update firstLayer
    const MdcHitOnTrack *mdcHit = localHistory[ihit]->mdcHitOnTrack();
    if (mdcHit != 0) {
      if (mdcHit->layer()->rEnd() < trk->firstLayer()->rEnd()) {
        trk->setFirstLayer(mdcHit->layer());    
      }
    }
    continue;          // no gap yet
      } else { 
    // gap found; delete hits
    if(6==tkParam.lPrint){
      std::cout << " gap found; delete hits. ";
    }
    if (!localHistory[ihit]->isUsable()) {
      if(6==tkParam.lPrint){
        cout << "about to delete hit for unusable HOT:" << endl;
        localHistory[ihit]->print(std::cout);
      }
      hitList->removeHit(localHistory[ihit]->hit());   
    }
    if(6==tkParam.lPrint){
      cout << " current contents of localHistory: "
        <<localHistory.length()<<"hot" << endl;
      //for (int i=0; i<localHistory.length();++i) {
      //cout << " hit @ " << localHistory[i]->hit() << "; hot @ " << localHistory[i] << endl;
      //}
    }
    nFound--;
      }
    }
    else if (localHistory[ihit] == 0) {
      if(6==tkParam.lPrint){ cout << " localHistory= 0 " << endl; }
      int nSuccess = 0;
      lContinue = false;
      int last = 8;
      if (nCand < 8) last = nCand;
      for (int i = 0; i < last; i++) {
    int j = ihit + 1 + i;
    if (localHistory[j] != 0) nSuccess++;
    if (i == 2 && nSuccess >= 2) lContinue = true;
    if (i == 4 && nSuccess >= 3) lContinue = true;
    //  if (i == 7 && nSuccess >= 5) lContinue = true;
    if (lContinue) break;
      }
    }
  }
  if(6==tkParam.lPrint){ 
    std::cout<<  "nFound="<<nFound <<" < "<< tkParam.pickHitFract*nCand<<" pickHitFract? "<< tkParam.pickHitFract<<"*"<<nCand  << std::endl;
  }
  if (nFound < tkParam.pickHitFract * nCand) nFound = 0;//yzhang delete 2010-05-10 use pickHitFract=0.
  if(6==tkParam.lPrint){ cout << " localHistory= 0 " << endl; }
 
  if(6==tkParam.lPrint || 3==tkParam.lPrint){
    cout << "After pickHits found " << nFound <<" hit(s)"<< endl;
    hitList->hotList().print(std::cout);
    std::cout<< std::endl;
  }
 
  return nFound;
}

Referenced by finishCircle(), and finishHelix().

pickHits() [2/2]

int MdcTrackList::pickHits	(	MdcTrack *	,
		const MdcHitMap *	,
		const MdcDetector *	,
		bool	pickAmb = true
	)

---

The documentation for this class was generated from the following files:

• InstallArea/include/MdcTrkRecon/MdcTrkRecon/MdcTrackList.h
• Reconstruction/MdcPatRec/MdcTrkRecon/MdcTrkRecon-00-03-49/MdcTrkRecon/MdcTrackList.h
• MdcTrackList.cxx