#include <MucGap.h>

Inheritance diagram for MucGap:

Public Member Functions
	MucGap (int part, int segment, int layer, int id)

	MucGap (const MucGap &other)

MucGap &	operator= (const MucGap &other)

	~MucGap ()

MucBox *	GetBox ()

Public Member Functions inherited from MucEntity
	MucEntity (int part, int segment, int layer)

	MucEntity (int part, int segment, int layer, int id)

	MucEntity (int part, int segment, int layer, int upDown, int id)

	MucEntity (int part, int segment, int layer, int upDown, int rpcId, int id)

	MucEntity (const MucEntity &other)

MucEntity &	operator= (const MucEntity &other)

virtual	~MucEntity ()

int	GetPart ()

int	GetSegment ()

int	GetLayer ()

int	GetUpDown ()

int	GetRpcId ()

int	GetID ()

double	GetTheta ()

double	GetRin ()

double	GetRout ()

double	GetRc ()

double	GetThin ()

double	GetW ()

double	GetH ()

double	GetL ()

double	GetWu ()

double	GetWd ()

double	GetArea ()

double	GetLocOrgInBes (int i)

double	GetObjRotToMot (int i)

double	GetObjOrgInBes (int i)

double	GetObjOrgInLoc (int i)

double *	GetLocOrgInBes ()

double *	GetObjRotToMot ()

double *	GetObjOrgInLoc ()

double *	GetObjOrgInBes ()

void	TransBesToLoc (double LocCoord[], double BesCoord[], double LocOrgInBes[], double Rot_z)

void	TransLocToBes (double LocCoord[], double BesCoord[], double LocOrgInBes[], double Rot_z)

Protected Member Functions
virtual void	Init ()

virtual void	SetTheta ()

virtual void	SetRin ()

virtual void	SetRout ()

virtual void	SetRc ()

virtual void	SetThin ()

virtual void	SetW ()

virtual void	SetH ()

virtual void	SetL ()

virtual void	SetWu ()

virtual void	SetWd ()

virtual void	SetLocOrgInBes ()

virtual void	SetObjRotToMot ()

virtual void	SetObjOrgInBes ()

virtual void	SetObjOrgInLoc ()

Protected Member Functions inherited from MucEntity
virtual void	SetArea ()

virtual void	SetAlignment (double dx, double dy, double dz)

Additional Inherited Members
Protected Attributes inherited from MucEntity
int	m_Part

int	m_Segment

int	m_Layer

int	m_UpDown

int	m_RpcId

int	m_ID

double	m_Theta

double	m_Rin

double	m_Rout

double	m_Rc

double	m_Thin

double	m_W

double	m_H

double	m_L

double	m_Wu

double	m_Wd

double	m_Area

double	m_LocOrgInBes [3]

double	m_ObjRotToMot [3]

double	m_ObjOrgInBes [3]

double	m_ObjOrgInLoc [3]

Detailed Description

Definition at line 18 of file MucGap.h.

Constructor & Destructor Documentation

◆ MucGap() [1/2]

MucGap::MucGap	(	int	part,
		int	segment,
		int	layer,
		int	id )

Definition at line 17 of file MucGap.cxx.

                                                         : MucEntity( part, segment, layer, id )
{
    MucGap::Init();
    m_MucBox = NULL;
}

◆ MucGap() [2/2]

MucGap::MucGap ( const MucGap & other )

Definition at line 24 of file MucGap.cxx.

                                    : MucEntity( other )
{
    m_MucBox    = other.m_MucBox;
}

◆ ~MucGap()

MucGap::~MucGap ( )

Definition at line 43 of file MucGap.cxx.

{   
    delete m_MucBox ;
}

Member Function Documentation

◆ GetBox()

MucBox * MucGap::GetBox ( )

Definition at line 72 of file MucGap.cxx.

{
    if( m_MucBox != NULL ) 
        return m_MucBox;
    else
        return ( m_MucBox = new MucBox(m_Part, m_Segment, m_Layer, ((m_Part==BRID)?0:-1) ) );
}

◆ Init()

void MucGap::Init ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 49 of file MucGap.cxx.

{
        SetTheta();
        SetRin();
        SetRout();
        SetRc();
 
        SetThin();
        SetW();
        SetWu();
        SetWd();
        SetH();
        SetL();
 
        SetLocOrgInBes();
        SetObjRotToMot();
        SetObjOrgInBes();
        SetObjOrgInLoc();
}

Referenced by MucGap().

◆ operator=()

MucGap & MucGap::operator= ( const MucGap & other )

Definition at line 30 of file MucGap.cxx.

{
    if( this == &other)
                return *this;
 
    MucEntity::operator =(other);
 
    m_MucBox        = other.m_MucBox;
 
        return *this;   
}

◆ SetH()

void MucGap::SetH ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 157 of file MucGap.cxx.

{
        if( m_Part == BRID )
                m_H = AS_GAP-0.2; // avoid overlap between absorber and gap
        else
        {
                if( m_ID == -1 ) // virtual encap gap
                        m_H = E_AS_RMAX - E_GP_DY;
        else if( m_ID == 1 )
        {       // for panel logical operation "AND" valid;
            m_H = E_AS_RMAX - E_GP_RMIN[m_Layer] +1.5*OVERLAP_WIDTH;
        }
                else
                        m_H = E_AS_RMAX - E_GP_RMIN[m_Layer];
        }
}

Referenced by Init().

◆ SetL()

void MucGap::SetL ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 174 of file MucGap.cxx.

{
        if( m_Part == BRID )
    {
        if( m_Segment != B_TOP || m_ID == -1 )
                    m_L = B_AS_LMAX;
        else // top segment
        {
            if( m_ID == 2 )
                m_L = B_AS_LMAX - B_GP_SLOT_LT;
            else
                m_L = B_GP_SLOT_LT;
        }
    }
        else
                m_L = AS_GAP;
}

Referenced by Init().

◆ SetLocOrgInBes()

void MucGap::SetLocOrgInBes ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 240 of file MucGap.cxx.

{
        double x, y, z;
    x = y = z = 0.;
    
        if( m_Part == BRID )
        {
                x = m_Rc*cos( m_Theta );
                y = m_Rc*sin( m_Theta );
                z = 0.;
        } // barrel
        else
        {
                //---------- set x and y ------------
        // segment 0 as reference 
                x = (E_AS_RMAX + E_GP_DX) / 2.0;
                y = (E_AS_RMAX + E_GP_DY) / 2.0;
 
                // x, y signs of coordinate different by segment 
                if( m_Segment == 0 )       {    ;               }
                else if ( m_Segment == 1 ) {    x = -x;         }
                else if ( m_Segment == 2 ) {    x = -x; y = -y; }
                else                       {    y = -y;         }
 
                //----------- set z ----------------
                for( int i=0; i<m_Layer+1; i++ ) z += E_AS_TH[i];
                z += m_Layer * AS_GAP;
                z += (E_AS_ZMAX - E_AS_TOTAL_TH ) + AS_GAP/2.0;
        z *= cos( m_Part*MUC_PI/2.0 );
 
        }// endcap
 
        m_LocOrgInBes[0] = x;
        m_LocOrgInBes[1] = y;
        m_LocOrgInBes[2] = z;
 
        // limit cut
        for(int i=0;i<3;i++) {
                if( fabs(m_LocOrgInBes[i]) < ERR_LIMIT ) m_LocOrgInBes[i] = 0;
        }
}

Referenced by Init().

◆ SetObjOrgInBes()

void MucGap::SetObjOrgInBes ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 293 of file MucGap.cxx.

{
        double x, y, z;
    x = y = z = 0.;
 
        if( m_Part == BRID )
        {
        if( m_Segment != B_TOP  || m_ID == -1 )
                    for( int i=0; i<3; i++ ) m_ObjOrgInBes[i] = m_LocOrgInBes[i];
        else // top segment
        {
            // set x
            if( m_ID == 2 ) x = 0.;
            else        x = (1-2*m_ID) * ( B_GP_WT[m_Layer] + B_GP_SLOT_WT )/4.0; 
            
 
            // set z
            if( m_ID == 2 ) z = -B_GP_SLOT_LT / 2.0;
            else        z = ( B_AS_LMAX - B_GP_SLOT_LT )/2.0;
            
            m_ObjOrgInBes[0] = x;
            m_ObjOrgInBes[2] = z;
                    
            // set y
            m_ObjOrgInBes[1] = m_LocOrgInBes[1];
 
            // limit cut
                    for( int i=0; i<3; i++ ) {
                            if( fabs(m_ObjOrgInBes[i]) < ERR_LIMIT ) m_ObjOrgInBes[i] = 0;
 
                    }
        }
        }
        else
        {
        // -------------- set x and y --------------------
        // setting segment 0 as reference 
                if( m_ID == 0 )
                {
                    x = m_Rc;
                        y = ( m_Rc * tan( m_Theta ) + E_GP_DY ) / 2.0;
                }
                else if ( m_ID ==1 )
                {
                        x = m_Rc * cos( m_Theta );
                        y = m_Rc * sin( m_Theta );
                }
                else // m_ID == 2
                {
                        x = ( m_Rc / tan( m_Theta ) + E_GP_DX ) / 2.0;
                        y = m_Rc;
                }
 
                // x, y signs of coordinate different by segment 
                if( m_Segment == 0 )       {    ;               }
                else if ( m_Segment == 1 ) {    x = -x;         }
                else if ( m_Segment == 2 ) {    x = -x; y = -y; }
                else                       {    y = -y;         }
    
                m_ObjOrgInBes[0] = x;
                m_ObjOrgInBes[1] = y;
 
                // limit cut
                for( int i=0; i<2; i++ ) {
                        if( fabs(m_ObjOrgInBes[i]) < ERR_LIMIT ) m_ObjOrgInBes[i] = 0;
                }
 
        // ------------- set z ------------------------
                m_ObjOrgInBes[2] = m_LocOrgInBes[2];
                
        } // else
}

Referenced by Init().

◆ SetObjOrgInLoc()

void MucGap::SetObjOrgInLoc ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 366 of file MucGap.cxx.

{
        if( m_Part == BRID)
    {   
        if( m_Segment != B_TOP )
                    for(int i=0; i<3; i++) m_ObjOrgInLoc[i] = 0.;
        else
            for(int i=0; i<3; i++) m_ObjOrgInLoc[i] = m_ObjOrgInBes[i] - m_LocOrgInBes[i];      
    }   
        else
                for(int i=0; i<3; i++) m_ObjOrgInLoc[i] = m_ObjOrgInBes[i] - m_LocOrgInBes[i];
}

Referenced by Init().

◆ SetObjRotToMot()

void MucGap::SetObjRotToMot ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 282 of file MucGap.cxx.

{
        m_ObjRotToMot[0] = 0.;
        m_ObjRotToMot[1] = 0.;
 
        if( m_Part == BRID )
                m_ObjRotToMot[2] = MUC_PI * (m_Segment - 2) / 4.0;
        else
                m_ObjRotToMot[2] = 0.;
}

Referenced by Init().

◆ SetRc()

void MucGap::SetRc ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 116 of file MucGap.cxx.

{
        if( m_Part == BRID )
                m_Rc = B_AS_RMIN[m_Layer] - AS_GAP/2.0;
        else
        {
                if( m_ID == -1 )
                        m_Rc = sqrt(2.0) * E_AS_RMAX / 2.0;
                else
                        m_Rc = (m_Rin + m_Rout)/2.0;
        }
}

Referenced by Init().

◆ SetRin()

void MucGap::SetRin ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 95 of file MucGap.cxx.

{
        if( m_Part == BRID )
                m_Rin = B_AS_RMIN[m_Layer] - AS_GAP;
        else
        {
                if( m_ID == -1 )
                        m_Rin = 0.;
                else
                        m_Rin = E_GP_RMIN[m_Layer];
        }
}

Referenced by Init().

◆ SetRout()

void MucGap::SetRout ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 108 of file MucGap.cxx.

{
        if( m_Part == BRID )
                m_Rout = B_AS_RMIN[m_Layer];
        else
                m_Rout = E_AS_RMAX;
}

Referenced by Init().

◆ SetTheta()

void MucGap::SetTheta ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 82 of file MucGap.cxx.

{
        if( m_Part == BRID )
                m_Theta = m_Segment * ( MUC_PI/4.0 );
        else
        {
                if( m_ID == -1 )
                        m_Theta = ( 2*m_Segment + 1 ) * ( MUC_PI/4.0 );
                else
                        m_Theta = ( MUC_PI/4.0 ) + ( m_ID - 1) * MUC_PI / 8.0 ;
        }
}

Referenced by Init().

◆ SetThin()

void MucGap::SetThin ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 129 of file MucGap.cxx.

{
        m_Thin = AS_GAP;
}

Referenced by Init().

◆ SetW()

void MucGap::SetW ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 134 of file MucGap.cxx.

{
        if( m_Part == BRID)
    {   
        if( m_Segment != B_TOP )
                    m_W = B_GP_WT[m_Layer];
        else    // top segment
        {
                if( m_ID == -1 || m_ID == 2 )
                m_W = B_GP_WT[m_Layer];
            else
                m_W = ( B_GP_WT[m_Layer] - B_GP_SLOT_WT )/2.0;
        }       
    }   
        else
        {
                if( m_ID == -1 ) // virtual encap gap 
                        m_W = E_AS_RMAX - E_GP_DX;
                else
                        m_W = 0.;
        }
}

Referenced by Init().

◆ SetWd()

void MucGap::SetWd ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 216 of file MucGap.cxx.

{
     if( m_Part == BRID )
                m_Wd = m_W;
        else
        {   
        if( m_ID == -1 )     // temporary local
            m_Wd = m_W;
        else if( m_ID == 1 ) // center fraction
        {
                    m_Wd = 2 * VALUE * m_Rout;
            m_Wd += 2*VALUE*(2.0/2); // for panel operation "AND" valid
            m_Wd += 1.5*OVERLAP_WIDTH;
        }   
                else if( m_ID == 0 )
                    m_Wd = VALUE * m_Rout - E_GP_DY;
        else
            m_Wd = VALUE * m_Rout - E_GP_DX;
 
        if( m_ID != -1 ) m_Wd+=OVERLAP_WIDTH; // avoid panels overlap
        }
}

Referenced by Init().

◆ SetWu()

void MucGap::SetWu ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 192 of file MucGap.cxx.

{
        if( m_Part == BRID )
                m_Wu = m_W;
        else
        {   
        if( m_ID == -1 )     // temporary local 
            m_Wu = m_W;
                else if( m_ID == 1 ) // center fraction
        {   
                        m_Wu = 2 * VALUE * m_Rin ;
            m_Wu -= 2*VALUE*(2.0/2); // for panel operation "AND" valid
            m_Wu += 1.5*OVERLAP_WIDTH;
        }   
                else if( m_ID == 0 )
                        m_Wu = VALUE * m_Rin - E_GP_DY;
        else
            m_Wu = VALUE * m_Rin - E_GP_DX;
 
        if( m_ID != -1 ) m_Wu+=OVERLAP_WIDTH; // avoid panels overlap
 
        }
}

Referenced by Init().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ MucGap() [1/2]

◆ MucGap() [2/2]

◆ ~MucGap()

Member Function Documentation

◆ GetBox()

◆ Init()

◆ operator=()

◆ SetH()

◆ SetL()

◆ SetLocOrgInBes()

◆ SetObjOrgInBes()

◆ SetObjOrgInLoc()

◆ SetObjRotToMot()

◆ SetRc()

◆ SetRin()

◆ SetRout()

◆ SetTheta()

◆ SetThin()

◆ SetW()

◆ SetWd()

◆ SetWu()