G4RichTrajectoryPoint.cc

Go to the documentation of this file.

//
// ********************************************************************
// * License and Disclaimer                                           *
// *                                                                  *
// * The  Geant4 software  is  copyright of the Copyright Holders  of *
// * the Geant4 Collaboration.  It is provided  under  the terms  and *
// * conditions of the Geant4 Software License,  included in the file *
// * LICENSE and available at  http://cern.ch/geant4/license .  These *
// * include a list of copyright holders.                             *
// *                                                                  *
// * Neither the authors of this software system, nor their employing *
// * institutes,nor the agencies providing financial support for this *
// * work  make  any representation or  warranty, express or implied, *
// * regarding  this  software system or assume any liability for its *
// * use.  Please see the license in the file  LICENSE  and URL above *
// * for the full disclaimer and the limitation of liability.         *
// *                                                                  *
// * This  code  implementation is the result of  the  scientific and *
// * technical work of the GEANT4 collaboration.                      *
// * By using,  copying,  modifying or  distributing the software (or *
// * any work based  on the software)  you  agree  to acknowledge its *
// * use  in  resulting  scientific  publications,  and indicate your *
// * acceptance of all terms of the Geant4 Software license.          *
// ********************************************************************
//
// G4RichTrajectoryPoint class implementation
//
// Contact:
//   Questions and comments on G4TrajectoryPoint, on which this is based,
//   should be sent to
//     Katsuya Amako  (e-mail: [email protected])
//     Makoto  Asai   (e-mail: [email protected])
//     Takashi Sasaki (e-mail: [email protected])
//   and on the extended code to:
//     John Allison   (e-mail: [email protected])
//     Joseph Perl    (e-mail: [email protected])
// --------------------------------------------------------------------
 
#include "G4RichTrajectoryPoint.hh"
 
#include "G4Track.hh"
#include "G4Step.hh"
#include "G4VProcess.hh"
 
#include "G4AttDefStore.hh"
#include "G4AttDef.hh"
#include "G4AttValue.hh"
#include "G4UnitsTable.hh"
 
//#define G4ATTDEBUG
#ifdef G4ATTDEBUG
#include "G4AttCheck.hh"
#endif
 
#include <sstream>
 
G4Allocator<G4RichTrajectoryPoint>*& aRichTrajectoryPointAllocator()
{
  G4ThreadLocalStatic G4Allocator<G4RichTrajectoryPoint>* _instance = nullptr;
  return _instance;
}
 
G4RichTrajectoryPoint::G4RichTrajectoryPoint()
{
}
 
G4RichTrajectoryPoint::G4RichTrajectoryPoint(const G4Track* aTrack)
  : G4TrajectoryPoint(aTrack->GetPosition()),
    fPreStepPointGlobalTime(aTrack->GetGlobalTime()),
    fPostStepPointGlobalTime(aTrack->GetGlobalTime()),
    fpPreStepPointVolume(aTrack->GetTouchableHandle()),
    fpPostStepPointVolume(aTrack->GetNextTouchableHandle()),
    fPreStepPointWeight(aTrack->GetWeight()),
    fPostStepPointWeight(aTrack->GetWeight())
{
}
 
G4RichTrajectoryPoint::G4RichTrajectoryPoint(const G4Step* aStep)
  : G4TrajectoryPoint(aStep->GetPostStepPoint()->GetPosition()),
    fpAuxiliaryPointVector(aStep->GetPointerToVectorOfAuxiliaryPoints()),
    fTotEDep(aStep->GetTotalEnergyDeposit())
{
  G4StepPoint* preStepPoint = aStep->GetPreStepPoint();
  G4StepPoint* postStepPoint = aStep->GetPostStepPoint();
  if (aStep->GetTrack()->GetCurrentStepNumber() <= 0)  // First step
  {
    fRemainingEnergy = aStep->GetTrack()->GetKineticEnergy();
  }
  else
  {
    fRemainingEnergy = preStepPoint->GetKineticEnergy() - fTotEDep;
  }
  fpProcess = postStepPoint->GetProcessDefinedStep();
  fPreStepPointStatus = preStepPoint->GetStepStatus();
  fPostStepPointStatus = postStepPoint->GetStepStatus();
  fPreStepPointGlobalTime = preStepPoint->GetGlobalTime();
  fPostStepPointGlobalTime = postStepPoint->GetGlobalTime();
  fpPreStepPointVolume = preStepPoint->GetTouchableHandle();
  fpPostStepPointVolume = postStepPoint->GetTouchableHandle();
  fPreStepPointWeight = preStepPoint->GetWeight();
  fPostStepPointWeight = postStepPoint->GetWeight();
}
 
G4RichTrajectoryPoint::G4RichTrajectoryPoint( const G4RichTrajectoryPoint &r )
  : G4TrajectoryPoint(r),
    fpAuxiliaryPointVector(r.fpAuxiliaryPointVector),
    fTotEDep(r.fTotEDep),
    fRemainingEnergy(r.fRemainingEnergy),
    fpProcess(r.fpProcess),
    fPreStepPointStatus(r.fPreStepPointStatus),
    fPostStepPointStatus(r.fPostStepPointStatus),
    fPreStepPointGlobalTime(r.fPreStepPointGlobalTime),
    fPostStepPointGlobalTime(r.fPostStepPointGlobalTime),
    fpPreStepPointVolume(r.fpPreStepPointVolume),
    fpPostStepPointVolume(r.fpPostStepPointVolume),
    fPreStepPointWeight(r.fPreStepPointWeight),
    fPostStepPointWeight(r.fPostStepPointWeight)
{
}
 
G4RichTrajectoryPoint::~G4RichTrajectoryPoint()
{
  delete fpAuxiliaryPointVector;
}
 
const std::map<G4String,G4AttDef>* G4RichTrajectoryPoint::GetAttDefs() const
{
  G4bool isNew;
  std::map<G4String,G4AttDef>* store
    = G4AttDefStore::GetInstance("G4RichTrajectoryPoint",isNew);
  if (isNew)
  {
    // Copy base class att defs...
    *store = *(G4TrajectoryPoint::GetAttDefs());
 
    G4String ID;
 
    ID = "Aux";
    (*store)[ID] = G4AttDef(ID, "Auxiliary Point Position",
                            "Physics","G4BestUnit","G4ThreeVector");
    ID = "TED";
    (*store)[ID] = G4AttDef(ID,"Total Energy Deposit",
                            "Physics","G4BestUnit","G4double");
    ID = "RE";
    (*store)[ID] = G4AttDef(ID,"Remaining Energy",
                            "Physics","G4BestUnit","G4double");
    ID = "PDS";
    (*store)[ID] = G4AttDef(ID,"Process Defined Step",
                            "Physics","","G4String");
    ID = "PTDS";
    (*store)[ID] = G4AttDef(ID,"Process Type Defined Step",
                            "Physics","","G4String");
    ID = "PreStatus";
    (*store)[ID] = G4AttDef(ID,"Pre-step-point status",
                            "Physics","","G4String");
    ID = "PostStatus";
    (*store)[ID] = G4AttDef(ID,"Post-step-point status",
                            "Physics","","G4String");
    ID = "PreT";
    (*store)[ID] = G4AttDef(ID,"Pre-step-point global time",
                            "Physics","G4BestUnit","G4double");
    ID = "PostT";
    (*store)[ID] = G4AttDef(ID,"Post-step-point global time",
                            "Physics","G4BestUnit","G4double");
    ID = "PreVPath";
    (*store)[ID] = G4AttDef(ID,"Pre-step Volume Path",
                            "Physics","","G4String");
    ID = "PostVPath";
    (*store)[ID] = G4AttDef(ID,"Post-step Volume Path",
                            "Physics","","G4String");
    ID = "PreW";
    (*store)[ID] = G4AttDef(ID,"Pre-step-point weight",
                            "Physics","","G4double");
    ID = "PostW";
    (*store)[ID] = G4AttDef(ID,"Post-step-point weight",
                            "Physics","","G4double");
  }
  return store;
}
 
static G4String Status(G4StepStatus stps)
{
  G4String status;
  switch (stps)
  {
    case fWorldBoundary:         status = "fWorldBoundary"; break;
    case fGeomBoundary:          status = "fGeomBoundary"; break;
    case fAtRestDoItProc:        status = "fAtRestDoItProc"; break;
    case fAlongStepDoItProc:     status = "fAlongStepDoItProc"; break;
    case fPostStepDoItProc:      status = "fPostStepDoItProc"; break;
    case fUserDefinedLimit:      status = "fUserDefinedLimit"; break;
    case fExclusivelyForcedProc: status = "fExclusivelyForcedProc"; break;
    case fUndefined:             status = "fUndefined"; break;
    default:                     status = "Not recognised"; break;
  }
  return status;
}
 
static G4String Path(const G4TouchableHandle& th)
{
  std::ostringstream oss;
  G4int depth = th->GetHistoryDepth();
  for (G4int i = depth; i >= 0; --i)
  {
    oss << th->GetVolume(i)->GetName()
        << ':' << th->GetCopyNumber(i);
    if (i != 0) oss << '/';
  }
  return oss.str();
}
 
std::vector<G4AttValue>* G4RichTrajectoryPoint::CreateAttValues() const
{
  // Create base class att values...
 
  std::vector<G4AttValue>* values = G4TrajectoryPoint::CreateAttValues();
 
  if (fpAuxiliaryPointVector != nullptr)
  {
    for (auto iAux = fpAuxiliaryPointVector->cbegin();
              iAux != fpAuxiliaryPointVector->cend(); ++iAux)
    {
      values->push_back(G4AttValue("Aux",G4BestUnit(*iAux,"Length"),""));
    }
  }
 
  values->push_back(G4AttValue("TED",G4BestUnit(fTotEDep,"Energy"),""));
  values->push_back(G4AttValue("RE",G4BestUnit(fRemainingEnergy,"Energy"),""));
 
  if (fpProcess != nullptr)
  {
    values->push_back
      (G4AttValue("PDS",fpProcess->GetProcessName(),""));
    values->push_back
      (G4AttValue
       ("PTDS",G4VProcess::GetProcessTypeName(fpProcess->GetProcessType()),""));
  }
  else
  {
    values->push_back(G4AttValue("PDS","None",""));
    values->push_back(G4AttValue("PTDS","None",""));
  }
 
  values->push_back
    (G4AttValue("PreStatus",Status(fPreStepPointStatus),""));
 
  values->push_back
    (G4AttValue("PostStatus",Status(fPostStepPointStatus),""));
 
  values->push_back
    (G4AttValue("PreT",G4BestUnit(fPreStepPointGlobalTime,"Time"),""));
 
  values->push_back
    (G4AttValue("PostT",G4BestUnit(fPostStepPointGlobalTime,"Time"),""));
 
  if (fpPreStepPointVolume && fpPreStepPointVolume->GetVolume())
  {
    values->push_back(G4AttValue("PreVPath",Path(fpPreStepPointVolume),""));
  }
  else
  {
    values->push_back(G4AttValue("PreVPath","None",""));
  }
 
  if (fpPostStepPointVolume && fpPostStepPointVolume->GetVolume())
  {
    values->push_back(G4AttValue("PostVPath",Path(fpPostStepPointVolume),""));
  }
  else
  {
    values->push_back(G4AttValue("PostVPath","None",""));
  }
 
  std::ostringstream oss1;
  oss1 << fPreStepPointWeight;
  values->push_back(G4AttValue("PreW",oss1.str(),""));
 
  std::ostringstream oss2;
  oss2 << fPostStepPointWeight;
  values->push_back(G4AttValue("PostW",oss2.str(),""));
 
#ifdef G4ATTDEBUG
  G4cout << G4AttCheck(values,GetAttDefs());
#endif
 
  return values;
}