G4GeometryMessenger Class Reference

#include <G4GeometryMessenger.hh>

Inheritance diagram for G4GeometryMessenger:

Public Member Functions
	G4GeometryMessenger (G4TransportationManager *tman)
	~G4GeometryMessenger ()
void	SetNewValue (G4UIcommand *command, G4String newValues)
G4String	GetCurrentValue (G4UIcommand *command)
Public Member Functions inherited from G4UImessenger
	G4UImessenger ()=default
	G4UImessenger (const G4String &path, const G4String &dsc, G4bool commandsToBeBroadcasted=true)
virtual	~G4UImessenger ()
virtual G4String	GetCurrentValue (G4UIcommand *command)
virtual void	SetNewValue (G4UIcommand *command, G4String newValue)
G4bool	operator== (const G4UImessenger &messenger) const
G4bool	operator!= (const G4UImessenger &messenger) const
G4bool	CommandsShouldBeInMaster () const

Additional Inherited Members
Protected Member Functions inherited from G4UImessenger
G4String	ItoS (G4int i)
G4String	DtoS (G4double a)
G4String	BtoS (G4bool b)
G4int	StoI (const G4String &s)
G4long	StoL (const G4String &s)
G4double	StoD (const G4String &s)
G4bool	StoB (G4String s)
void	AddUIcommand (G4UIcommand *newCommand)
void	CreateDirectory (const G4String &path, const G4String &dsc, G4bool commandsToBeBroadcasted=true)
template<typename T >
T *	CreateCommand (const G4String &cname, const G4String &dsc)
Protected Attributes inherited from G4UImessenger
G4UIdirectory *	baseDir = nullptr
G4String	baseDirName = ""
G4bool	commandsShouldBeInMaster = false

Detailed Description

Definition at line 53 of file G4GeometryMessenger.hh.

Constructor & Destructor Documentation

G4GeometryMessenger()

G4GeometryMessenger::G4GeometryMessenger

(

G4TransportationManager *

tman

)

Definition at line 53 of file G4GeometryMessenger.cc.

  : tmanager(tman)
{
  geodir = new G4UIdirectory( "/geometry/" );
  geodir->SetGuidance( "Geometry control commands." );
 
  //
  // Geometry navigator commands
  //
  navdir = new G4UIdirectory( "/geometry/navigator/" );
  navdir->SetGuidance( "Geometry navigator control setup." );
 
  resCmd = new G4UIcmdWithoutParameter( "/geometry/navigator/reset", this );
  resCmd->SetGuidance( "Reset navigator and navigation history." );
  resCmd->SetGuidance( "NOTE: must be called only after kernel has been" );
  resCmd->SetGuidance( "      initialized once through the run manager!" );
  resCmd->AvailableForStates(G4State_Idle);
 
  verbCmd = new G4UIcmdWithAnInteger( "/geometry/navigator/verbose", this );
  verbCmd->SetGuidance( "Set run-time verbosity for the navigator." );
  verbCmd->SetGuidance(" 0 : Silent (default)");
  verbCmd->SetGuidance(" 1 : Display volume positioning and step lengths");
  verbCmd->SetGuidance(" 2 : Display step/safety info on point location");
  verbCmd->SetGuidance(" 3 : Display minimal state at -every- step");
  verbCmd->SetGuidance(" 4 : Maximum verbosity (very detailed!)");
  verbCmd->SetGuidance( "NOTE: this command has effect -only- if Geant4 has" );
  verbCmd->SetGuidance( "      been installed with the G4VERBOSE flag set!" );
  verbCmd->SetParameterName("level",true);
  verbCmd->SetDefaultValue(0);
  verbCmd->SetRange("level >=0 && level <=4");
 
  chkCmd = new G4UIcmdWithABool( "/geometry/navigator/check_mode", this );
  chkCmd->SetGuidance( "Set navigator in -check_mode- state." );
  chkCmd->SetGuidance( "This will cause extra checks to be applied during" );
  chkCmd->SetGuidance( "navigation. More strict and less tolerant conditions" );
  chkCmd->SetGuidance( "are applied. A run-time performance penalty may be" );
  chkCmd->SetGuidance( "observed when the -check_mode- state is activated." );
  chkCmd->SetGuidance( "NOTE: this command has effect -only- if Geant4 has" );
  chkCmd->SetGuidance( "      been installed with the G4VERBOSE flag set!" );
  chkCmd->SetParameterName("checkFlag",true);
  chkCmd->SetDefaultValue(false);
  chkCmd->AvailableForStates(G4State_Idle);
 
  pchkCmd = new G4UIcmdWithABool( "/geometry/navigator/push_notify", this );
  pchkCmd->SetGuidance( "Set navigator verbosity push notifications." );
  pchkCmd->SetGuidance( "This allows one to disable/re-enable verbosity in" );
  pchkCmd->SetGuidance( "navigation, when tracks may get stuck and require" );
  pchkCmd->SetGuidance( "one artificial push along the direction by the" );
  pchkCmd->SetGuidance( "navigator. Notification is active by default." );
  pchkCmd->SetGuidance( "NOTE: this command has effect -only- if Geant4 has" );
  pchkCmd->SetGuidance( "      been installed with the G4VERBOSE flag set!" );
  pchkCmd->SetParameterName("pushFlag",true);
  pchkCmd->SetDefaultValue(true);
  pchkCmd->AvailableForStates(G4State_Idle);
 
  //
  // Geometry verification test commands
  //
  testdir = new G4UIdirectory( "/geometry/test/" );
  testdir->SetGuidance( "Geometry verification control setup." );
  testdir->SetGuidance( "Helps in detecting possible overlapping regions." );
 
  tolCmd = new G4UIcmdWithADoubleAndUnit( "/geometry/test/tolerance",this );
  tolCmd->SetGuidance( "Define tolerance (in mm) by which overlaps reports" );
  tolCmd->SetGuidance( "should be reported. By default, all overlaps are" );
  tolCmd->SetGuidance( "reported, i.e. tolerance is set to: 0*mm." );
  tolCmd->SetParameterName( "Tolerance", true, true );
  tolCmd->SetDefaultValue( 0 );
  tolCmd->SetDefaultUnit( "mm" );
  tolCmd->SetUnitCategory( "Length" );
 
  verCmd = new G4UIcmdWithABool( "/geometry/test/verbosity", this );
  verCmd->SetGuidance( "Specify if running in verbosity mode or not." );
  verCmd->SetGuidance( "By default verbosity is set to ON (TRUE)." );
  verCmd->SetParameterName("verbosity",true);
  verCmd->SetDefaultValue(true);
  verCmd->AvailableForStates(G4State_Idle);
 
  rslCmd = new G4UIcmdWithAnInteger( "/geometry/test/resolution", this );
  rslCmd->SetGuidance( "Set the number of points on surface to be generated for" );
  rslCmd->SetGuidance( "checking overlaps." );
  rslCmd->SetParameterName("resolution",true);
  rslCmd->SetDefaultValue(10000);
 
  rcsCmd = new G4UIcmdWithAnInteger( "/geometry/test/recursion_start", this );
  rcsCmd->SetGuidance( "Set the initial level in the geometry tree for recursion." );
  rcsCmd->SetGuidance( "recursive_test will then start from the specified level." );
  rcsCmd->SetParameterName("initial_level",true);
  rcsCmd->SetDefaultValue(0);
 
  rcdCmd = new G4UIcmdWithAnInteger( "/geometry/test/recursion_depth", this );
  rcdCmd->SetGuidance( "Set the depth in the geometry tree for recursion." );
  rcdCmd->SetGuidance( "recursive_test will then stop after reached the specified depth." );
  rcdCmd->SetGuidance( "By default, recursion will proceed for the whole depth." );
  rcdCmd->SetParameterName("recursion_depth",true);
  rcdCmd->SetDefaultValue(-1);
 
  errCmd = new G4UIcmdWithAnInteger( "/geometry/test/maximum_errors", this );
  errCmd->SetGuidance( "Set the maximum number of overlap errors to report" );
  errCmd->SetGuidance( "for each single volume being checked." );
  errCmd->SetGuidance( "Once reached the maximum number specified, overlaps" );
  errCmd->SetGuidance( "affecting that volume further than that are simply ignored." );
  errCmd->SetParameterName("maximum_errors",true);
  errCmd->SetDefaultValue(1);
 
  parCmd = new G4UIcmdWithABool( "/geometry/test/check_parallel", this );
  parCmd->SetGuidance( "Check for overlaps in parallel worlds." );
  parCmd->SetGuidance( "By default, overlaps are only checked in the mass world (FALSE)." );
  parCmd->SetParameterName("check_parallel",true);
  parCmd->SetDefaultValue(true);
 
  recCmd = new G4UIcmdWithoutParameter( "/geometry/test/run", this );
  recCmd->SetGuidance( "Start running the recursive overlap check." );
  recCmd->SetGuidance( "Volumes are recursively asked to verify for overlaps" );
  recCmd->SetGuidance( "for points generated on the surface against their" );
  recCmd->SetGuidance( "respective mother volume and sisters at the same" );
  recCmd->SetGuidance( "level, performing for all daughters and daughters of" );
  recCmd->SetGuidance( "daughters, etc." );
  recCmd->SetGuidance( "NOTE: it may take a very long time," );
  recCmd->SetGuidance( "      depending on the geometry complexity !");
  recCmd->AvailableForStates(G4State_Idle);
}

~G4GeometryMessenger()

G4GeometryMessenger::~G4GeometryMessenger

(

)

Definition at line 179 of file G4GeometryMessenger.cc.

{
  delete verCmd; delete recCmd; delete rslCmd;
  delete resCmd; delete rcsCmd; delete rcdCmd; delete errCmd;
  delete tolCmd;
  delete verbCmd; delete pchkCmd; delete chkCmd;
  delete geodir; delete navdir; delete testdir;
  for(auto* tvolume: tvolumes) {
      delete tvolume;
  }
}

Member Function Documentation

GetCurrentValue()

G4String G4GeometryMessenger::GetCurrentValue ( G4UIcommand *  command )

virtual

Reimplemented from G4UImessenger.

Definition at line 280 of file G4GeometryMessenger.cc.

{
  G4String cv = "";
  if (command == tolCmd)
  {
    cv = tolCmd->ConvertToString( tol, "mm" );
  }
  return cv;
}

SetNewValue()

void G4GeometryMessenger::SetNewValue ( G4UIcommand *  command, G4String  newValues  )

virtual

Reimplemented from G4UImessenger.

Definition at line 218 of file G4GeometryMessenger.cc.

{
  if (command == resCmd) {
    ResetNavigator();
  }
  else if (command == verbCmd) {
    SetVerbosity( newValues );
  }
  else if (command == chkCmd) {
    SetCheckMode( newValues );
  }
  else if (command == pchkCmd) {
    SetPushFlag( newValues );
  }
  else if (command == tolCmd) {
    Init();
    tol = tolCmd->GetNewDoubleValue( newValues )
        * tolCmd->GetNewUnitValue( newValues );
    for(auto* tvolume: tvolumes)
    {
      tvolume->SetTolerance(tol);
    }
  }
  else if (command == verCmd) {
    Init();
    for(auto* tvolume: tvolumes)
    {
      tvolume->SetVerbosity(verCmd->GetNewBoolValue( newValues ));
    }
  }
  else if (command == rslCmd) {
    Init();
    for(auto* tvolume: tvolumes)
    {
      tvolume->SetResolution(rslCmd->GetNewIntValue( newValues ));
    }
  }
  else if (command == rcsCmd) {
    recLevel = rcsCmd->GetNewIntValue( newValues );
  }
  else if (command == rcdCmd) {
    recDepth = rcdCmd->GetNewIntValue( newValues );
  }
  else if (command == errCmd) {
    Init();
    for(auto* tvolume: tvolumes)
    {
      tvolume->SetErrorsThreshold(errCmd->GetNewIntValue( newValues ));
    }
  }
  else if (command == recCmd) {
    Init();
    G4cout << "Running geometry overlaps check..." << G4endl;
    RecursiveOverlapTest();
    G4cout << "Geometry overlaps check completed !" << G4endl;
  }
}

---

The documentation for this class was generated from the following files:

• G4GeometryMessenger.hh
• G4GeometryMessenger.cc