Geant4 11.1.1
Toolkit for the simulation of the passage of particles through matter
Loading...
Searching...
No Matches
G4ErrorCylSurfaceTarget.cc
Go to the documentation of this file.
1//
2// ********************************************************************
3// * License and Disclaimer *
4// * *
5// * The Geant4 software is copyright of the Copyright Holders of *
6// * the Geant4 Collaboration. It is provided under the terms and *
7// * conditions of the Geant4 Software License, included in the file *
8// * LICENSE and available at http://cern.ch/geant4/license . These *
9// * include a list of copyright holders. *
10// * *
11// * Neither the authors of this software system, nor their employing *
12// * institutes,nor the agencies providing financial support for this *
13// * work make any representation or warranty, express or implied, *
14// * regarding this software system or assume any liability for its *
15// * use. Please see the license in the file LICENSE and URL above *
16// * for the full disclaimer and the limitation of liability. *
17// * *
18// * This code implementation is the result of the scientific and *
19// * technical work of the GEANT4 collaboration. *
20// * By using, copying, modifying or distributing the software (or *
21// * any work based on the software) you agree to acknowledge its *
22// * use in resulting scientific publications, and indicate your *
23// * acceptance of all terms of the Geant4 Software license. *
24// ********************************************************************
25//
26// G4ErrorCylSurfaceTarget class implementation
27//
28// Created: P.Arce, September 2004
29// --------------------------------------------------------------------
30
33
34#ifdef G4VERBOSE
35#include "G4ErrorPropagatorData.hh" // for verbosity checking
36#endif
37
38#include "geomdefs.hh"
39#include "G4Normal3D.hh"
40#include "G4Plane3D.hh"
41
42//---------------------------------------------------------------------
43
46 const G4ThreeVector& trans,
47 const G4RotationMatrix& rotm )
48 : fradius(radius)
49{
51
52 ftransform = G4AffineTransform( rotm.inverse(), -trans );
53#ifdef G4VERBOSE
55 {
56 Dump( " $$$ creating G4ErrorCylSurfaceTarget ");
57 }
58#endif
59}
60
61//---------------------------------------------------------------------
62
65 const G4AffineTransform& trans )
66 : fradius(radius), ftransform(trans.Inverse())
67{
69
70#ifdef G4VERBOSE
72 {
73 Dump( " $$$ creating G4ErrorCylSurfaceTarget ");
74 }
75#endif
76}
77
78//---------------------------------------------------------------------
79
82 const G4ThreeVector& dir ) const
83{
84 if( dir.mag() == 0. )
85 {
86 G4Exception("G4ErrorCylSurfaceTarget::GetDistanceFromPoint()",
87 "GeomMgt0003", FatalException, "Direction is zero !");
88 }
89
90 //----- Get intersection point
91 G4ThreeVector localPoint = ftransform.TransformPoint( point );
92 G4ThreeVector localDir = ftransform.TransformAxis( dir );
93 G4ThreeVector inters = IntersectLocal(localPoint, localDir);
94
95 G4double dist = (localPoint-inters).mag();
96
97#ifdef G4VERBOSE
99 {
100 G4cout << " G4ErrorCylSurfaceTarget::GetDistanceFromPoint():" << G4endl
101 << " Global point " << point << " dir " << dir << G4endl
102 << " Intersection " << inters << G4endl
103 << " Distance " << dist << G4endl;
104 Dump( " CylSurface: " );
105 }
106#endif
107
108 return dist;
109}
110
111
112//---------------------------------------------------------------------
113
115GetDistanceFromPoint( const G4ThreeVector& point ) const
116{
117 G4ThreeVector localPoint = ftransform.TransformPoint( point );
118
119#ifdef G4VERBOSE
121 {
122 G4cout << " G4ErrorCylSurfaceTarget::GetDistanceFromPoint:" << G4endl
123 << " Global point " << point << G4endl
124 << " Distance " << fradius - localPoint.perp() << G4endl;
125 Dump( " CylSurface: " );
126 }
127#endif
128
129 return fradius - localPoint.perp();
130}
131
132//---------------------------------------------------------------------
133
135IntersectLocal( const G4ThreeVector& localPoint,
136 const G4ThreeVector& localDir ) const
137{
138 G4double eqa = localDir.x()*localDir.x()+localDir.y()*localDir.y();
139 G4double eqb = 2*(localPoint.x()*localDir.x()+localPoint.y()*localDir.y());
140 G4double eqc = -fradius*fradius+localPoint.x()*localPoint.x()
141 +localPoint.y()*localPoint.y();
142 G4int inside = (localPoint.perp() > fradius) ? -1 : 1;
143 G4double lambda;
144
145 if( eqa*inside > 0. )
146 {
147 lambda = (-eqb + std::sqrt(eqb*eqb-4*eqa*eqc) ) / (2.*eqa);
148 }
149 else if( eqa*inside < 0. )
150 {
151 lambda = (-eqb - std::sqrt(eqb*eqb-4*eqa*eqc) ) / (2.*eqa);
152 }
153 else
154 {
155 if( eqb != 0. )
156 {
157 lambda = -eqc/eqb;
158 }
159 else
160 {
161 std::ostringstream message;
162 message << "Intersection not possible !" << G4endl
163 << " Point: " << localPoint << ", direction: "
164 << localDir;
165 Dump( " CylSurface: " );
166 G4Exception("G4ErrorCylSurfaceTarget::IntersectLocal()",
167 "GeomMgt1002", JustWarning, message);
168 lambda = kInfinity;
169 }
170 }
171
172 G4ThreeVector inters = localPoint + lambda*localDir/localDir.mag();
173
174#ifdef G4VERBOSE
175 if(G4ErrorPropagatorData::verbose() >= 4 ) {
176 G4cout << " G4ErrorCylSurfaceTarget::IntersectLocal " << inters << " "
177 << inters.perp() << " localPoint " << localPoint << " localDir "
178 << localDir << G4endl;
179 }
180#endif
181
182 return inters;
183}
184
185//---------------------------------------------------------------------
186
188GetTangentPlane( const G4ThreeVector& point ) const
189{
190 G4ThreeVector localPoint = ftransform.TransformPoint( point );
191
192 // check that point is at cylinder surface
193 //
194 if( std::fabs( localPoint.perp() - fradius )
196 {
197 std::ostringstream message;
198 message << "Local point not at surface !" << G4endl
199 << " Point: " << point << ", local: " << localPoint
200 << G4endl
201 << " is not at surface, but far away by: "
202 << localPoint.perp() - fradius << " !";
203 G4Exception("G4ErrorCylSurfaceTarget::GetTangentPlane()",
204 "GeomMgt1002", JustWarning, message);
205 }
206
207 G4Normal3D normal = localPoint - ftransform.NetTranslation();
208
209 return G4Plane3D( normal, point );
210}
211
212
213//---------------------------------------------------------------------
214
216{
217 G4cout << msg << " radius " << fradius
218 << " centre " << ftransform.NetTranslation()
219 << " rotation " << ftransform.NetRotation() << G4endl;
220}
@ G4ErrorTarget_CylindricalSurface
@ JustWarning
@ FatalException
void G4Exception(const char *originOfException, const char *exceptionCode, G4ExceptionSeverity severity, const char *description)
Definition: G4Exception.cc:59
HepGeom::Plane3D< G4double > G4Plane3D
Definition: G4Plane3D.hh:34
double G4double
Definition: G4Types.hh:83
int G4int
Definition: G4Types.hh:85
#define G4endl
Definition: G4ios.hh:57
G4GLOB_DLL std::ostream G4cout
double x() const
double y() const
double mag() const
double perp() const
HepRotation inverse() const
G4ThreeVector NetTranslation() const
G4RotationMatrix NetRotation() const
G4ThreeVector TransformPoint(const G4ThreeVector &vec) const
G4ThreeVector TransformAxis(const G4ThreeVector &axis) const
virtual G4Plane3D GetTangentPlane(const G4ThreeVector &point) const
G4ErrorCylSurfaceTarget(const G4double &radius, const G4ThreeVector &trans=G4ThreeVector(), const G4RotationMatrix &rotm=G4RotationMatrix())
virtual G4ThreeVector IntersectLocal(const G4ThreeVector &point, const G4ThreeVector &direc) const
virtual void Dump(const G4String &msg) const
virtual G4double GetDistanceFromPoint(const G4ThreeVector &point, const G4ThreeVector &direc) const
G4ErrorTargetType theType
G4double GetSurfaceTolerance() const
static G4GeometryTolerance * GetInstance()