#include <G4PathFinder.hh>

Public Member Functions
G4double	ComputeStep (const G4FieldTrack &pFieldTrack, G4double pCurrentProposedStepLength, G4int navigatorId, G4int stepNo, G4double &pNewSafety, ELimited &limitedStep, G4FieldTrack &EndState, G4VPhysicalVolume *currentVolume)

void	Locate (const G4ThreeVector &position, const G4ThreeVector &direction, G4bool relativeSearch=true)

void	ReLocate (const G4ThreeVector &position)

void	PrepareNewTrack (const G4ThreeVector &position, const G4ThreeVector &direction, G4VPhysicalVolume *massStartVol=nullptr)

void	EndTrack ()

G4TouchableHandle	CreateTouchableHandle (G4int navId) const

G4VPhysicalVolume *	GetLocatedVolume (G4int navId) const

G4bool	IsParticleLooping () const

G4double	GetCurrentSafety () const

G4double	GetMinimumStep () const

unsigned int	GetNumberGeometriesLimitingStep () const

G4double	ComputeSafety (const G4ThreeVector &globalPoint)

G4double	ObtainSafety (G4int navId, G4ThreeVector &globalCenterPoint)

void	EnableParallelNavigation (G4bool enableChoice=true)

G4int	SetVerboseLevel (G4int lev=-1)

G4int	GetMaxLoopCount () const

void	SetMaxLoopCount (G4int new_max)

void	MovePoint ()

G4double	LastPreSafety (G4int navId, G4ThreeVector &globalCenterPoint, G4double &minSafety)

void	PushPostSafetyToPreSafety ()

G4String &	LimitedString (ELimited lim)

	~G4PathFinder ()

Static Public Member Functions
static G4PathFinder *	GetInstance ()

static G4PathFinder *	GetInstanceIfExist ()

Protected Member Functions
G4double	DoNextLinearStep (const G4FieldTrack &FieldTrack, G4double proposedStepLength)

G4double	DoNextCurvedStep (const G4FieldTrack &FieldTrack, G4double proposedStepLength, G4VPhysicalVolume *pCurrentPhysVolume)

void	WhichLimited ()

void	PrintLimited ()

G4bool	UseSafetyForOptimization (G4bool)

void	ReportMove (const G4ThreeVector &OldV, const G4ThreeVector &NewV, const G4String &Quantity) const

	G4PathFinder ()

G4Navigator *	GetNavigator (G4int n) const

Detailed Description

Definition at line 59 of file G4PathFinder.hh.

Constructor & Destructor Documentation

◆ ~G4PathFinder()

G4PathFinder::~G4PathFinder ( )

Definition at line 106 of file G4PathFinder.cc.

{
   delete fpMultiNavigator;
   fpPathFinder = 0;
}

◆ G4PathFinder()

G4PathFinder::G4PathFinder ( )

protected

Definition at line 74 of file G4PathFinder.cc.

  : fEndState( G4ThreeVector(), G4ThreeVector(), 0., 0., 0., 0., 0.)
{
   fpMultiNavigator = new G4MultiNavigator(); 
 
   fpTransportManager= G4TransportationManager::GetTransportationManager();
   fpFieldPropagator = fpTransportManager->GetPropagatorInField();
 
   kCarTolerance = G4GeometryTolerance::GetInstance()->GetSurfaceTolerance();
 
   G4ThreeVector  Big3Vector( kInfinity, kInfinity, kInfinity );
   fLastLocatedPosition= Big3Vector;
   fSafetyLocation= Big3Vector; 
   fPreSafetyLocation= Big3Vector;
   fPreStepLocation= Big3Vector;
 
   for( auto num=0; num<fMaxNav; ++num )
   {
      fpNavigator[num] = nullptr;   
      fLimitTruth[num] = false;
      fLimitedStep[num] = kUndefLimited;
      fCurrentStepSize[num] = -1.0; 
      fLocatedVolume[num] = 0;
      fPreSafetyValues[num]= -1.0; 
      fCurrentPreStepSafety[num] = -1.0;
      fNewSafetyComputed[num]= -1.0; 
   }
}

Referenced by GetInstance().

Member Function Documentation

◆ ComputeSafety()

G4double G4PathFinder::ComputeSafety ( const G4ThreeVector & globalPoint )

Definition at line 736 of file G4PathFinder.cc.

{
    // Recompute safety for the relevant point
 
   G4double minSafety = kInfinity; 
  
   std::vector<G4Navigator*>::iterator pNavigatorIter;
   pNavigatorIter = fpTransportManager->GetActiveNavigatorsIterator();
 
   for( auto num=0; num<fNoActiveNavigators; ++pNavigatorIter,++num )
   {
      G4double safety = (*pNavigatorIter)->ComputeSafety(position,DBL_MAX,true);
      if( safety < minSafety ) { minSafety = safety; } 
      fNewSafetyComputed[num] = safety;
   } 
 
   fSafetyLocation = position;
   fMinSafety_atSafLocation = minSafety;
 
#ifdef G4DEBUG_PATHFINDER
   if( fVerboseLevel > 1 )
   { 
     G4cout << " G4PathFinder::ComputeSafety - returns " 
            << minSafety << " at location " << position << G4endl;
   }
#endif
   return minSafety; 
}

Referenced by G4CoupledTransportation::AlongStepGetPhysicalInteractionLength(), G4SafetyHelper::ComputeSafety(), G4ITSafetyHelper::ComputeSafety(), and ReLocate().

◆ ComputeStep()

G4double G4PathFinder::ComputeStep	(	const G4FieldTrack &	pFieldTrack,
		G4double	pCurrentProposedStepLength,
		G4int	navigatorId,
		G4int	stepNo,
		G4double &	pNewSafety,
		ELimited &	limitedStep,
		G4FieldTrack &	EndState,
		G4VPhysicalVolume *	currentVolume
	)

Definition at line 142 of file G4PathFinder.cc.

{
  G4double possibleStep = -1.0; 
 
#ifdef G4DEBUG_PATHFINDER
  if( fVerboseLevel > 2 )
  { 
    G4cout << " -------------------------" <<  G4endl;
    G4cout << " G4PathFinder::ComputeStep - entered " << G4endl;
    G4cout << "   - stepNo = "  << std::setw(4) << stepNo  << " "
           << " navigatorId = " << std::setw(2) << navigatorNo  << " "
           << " proposed step len = " << proposedStepLength << " " << G4endl;
    G4cout << " PF::ComputeStep requested step " 
           << " from " << InitialFieldTrack.GetPosition()
           << " dir  " << InitialFieldTrack.GetMomentumDirection() << G4endl;
  }
#endif
#ifdef G4VERBOSE
  if( navigatorNo >= fNoActiveNavigators )
  {
    std::ostringstream message;
    message << "Bad Navigator ID !" << G4endl
            << "        Requested Navigator ID = " << navigatorNo << G4endl
            << "        Number of active navigators = " << fNoActiveNavigators;
    G4Exception("G4PathFinder::ComputeStep()", "GeomNav0002",
                FatalException, message); 
  }
#endif
 
  if( fNewTrack || (stepNo != fLastStepNo)  )
  {
    // This is a new track or a new step, so we must make the step
    // ( else we can simply retrieve its results for this Navigator Id )    
 
    G4FieldTrack currentState = InitialFieldTrack;
 
    fCurrentStepNo = stepNo; 
 
    // Check whether a process shifted the position 
    // since the last step -- by physics processes
    //
    G4ThreeVector newPosition = InitialFieldTrack.GetPosition();   
    G4ThreeVector moveVector = newPosition - fLastLocatedPosition; 
    G4double moveLenSq = moveVector.mag2(); 
    if( moveLenSq > sqr(kCarTolerance) )
    { 
       G4ThreeVector newDirection = InitialFieldTrack.GetMomentumDirection();   
#ifdef G4DEBUG_PATHFINDER
       if( fVerboseLevel > 2 )
       { 
          G4double moveLen= std::sqrt( moveLenSq ); 
          G4cout << " G4PathFinder::ComputeStep : Point moved since last step " 
                 << " -- at step # = " << stepNo << G4endl
                 << " by " << moveLen  << " to " << newPosition << G4endl;      
       } 
#endif
       MovePoint();  // Unintentional changed -- ????
 
       // Relocate to cope with this move -- else could abort !?
       //
       Locate( newPosition, newDirection ); 
    }
 
    // Check whether the particle have an (EM) field force exerting upon it
    //
    G4double particleCharge = currentState.GetCharge(); 
 
    G4FieldManager* fieldMgr = nullptr;
    G4bool          fieldExertsForce = false ;
    if( particleCharge != 0.0 )
    {
        fieldMgr = fpFieldPropagator->FindAndSetFieldManager( currentVolume );
 
        // Protect for case where field manager has no field (= field is zero)
        //
        fieldExertsForce = (fieldMgr != nullptr) 
                        && (fieldMgr->GetDetectorField() != nullptr);
    }
    fFieldExertedForce = fieldExertsForce;  // Store for use in later calls
                                            // referring to this 'step'.
 
    fNoGeometriesLimiting = -1;  // At start of track, no process limited step
    if( fieldExertsForce )
    {
       DoNextCurvedStep( currentState, proposedStepLength, currentVolume ); 
       //--------------
    }else{
       DoNextLinearStep( currentState, proposedStepLength ); 
       //--------------
    }
    fLastStepNo = stepNo; 
    fRelocatedPoint = false;
 
#ifdef  G4DEBUG_PATHFINDER
    if ( (fNoGeometriesLimiting < 0)
      || (fNoGeometriesLimiting > fNoActiveNavigators) )
    {
      std::ostringstream message;
      message << "Number of geometries limiting the step not set." << G4endl
              << "        Number of geometries limiting step = "
              << fNoGeometriesLimiting;
      G4Exception("G4PathFinder::ComputeStep()", 
                  "GeomNav0002", FatalException, message); 
    }
#endif
  }
#ifdef G4DEBUG_PATHFINDER      
  else
  {
     const G4double checkTolerance = 1.0e-9; 
     if( proposedStepLength < fTrueMinStep * ( 1.0 - checkTolerance) )
     {                                                   // For 2nd+ geometry 
       std::ostringstream message;
       message.precision( 12 ); 
       message << "Problem in step size request." << G4endl
               << "        Being requested to make a step which is shorter"
               << " than the minimum Step " << G4endl
               << "        already computed for any Navigator/geometry during"
               << " this tracking-step: " << G4endl
               << "        This could happen due to an error in process ordering."
               << G4endl
               << "        Check that all physics processes are registered"
               << "        before all processes with a navigator/geometry."
               << G4endl
               << "        If using pre-packaged physics list and/or"
               << "        functionality, please report this error."
               << G4endl << G4endl
               << "        Additional information for problem: "  << G4endl
               << "        Steps request/proposed = " << proposedStepLength
               << G4endl
               << "        MinimumStep (true) = " << fTrueMinStep
               << G4endl
               << "        MinimumStep (navraw)  = " << fMinStep
               << G4endl
               << "        Navigator raw return value" << G4endl
               << "        Requested step now = " << proposedStepLength
               << G4endl
               << "        Difference min-req (absolute) = "
               << fTrueMinStep-proposedStepLength << G4endl
               << "        Relative (to max of two) = " 
               << (fTrueMinStep-proposedStepLength)
                  / std::max(proposedStepLength, fTrueMinStep) << G4endl
               << "     -- Step info> stepNo= " << stepNo
               << " last= " << fLastStepNo 
               << " newTr= " << fNewTrack << G4endl;
        G4Exception("G4PathFinder::ComputeStep()", 
                    "GeomNav0003", FatalException, message);
     }
     else
     { 
        // This is neither a new track nor a new step -- just another 
        // client accessing information for the current track, step 
        // We will simply retrieve the results of the synchronous
        // stepping for this Navigator Id below.
        //
        if( fVerboseLevel > 1 )
        { 
           G4cout << " G4P::CS -> Not calling DoNextLinearStep: " 
                  << " stepNo= " << stepNo << " last= " << fLastStepNo 
                  << " new= " << fNewTrack << " Step already done" << G4endl; 
        }
     } 
  }
#endif
 
  fNewTrack = false; 
 
  // Prepare the information to return
 
  pNewSafety  = fCurrentPreStepSafety[ navigatorNo ]; 
  limitedStep = fLimitedStep[ navigatorNo ];
 
  possibleStep = std::min(proposedStepLength, fCurrentStepSize[ navigatorNo ]);
  EndState = fEndState;  //  now corrected for smaller step, if needed
 
#ifdef G4DEBUG_PATHFINDER
  if( fVerboseLevel > 0 )
  { 
    G4cout << " G4PathFinder::ComputeStep returns "
           << fCurrentStepSize[ navigatorNo ]
           << " for Navigator " << navigatorNo 
           << " Limited step = " << limitedStep 
           << " Safety(mm) = " << pNewSafety / mm 
           << G4endl; 
  }
#endif
 
  return possibleStep;
}

◆ CreateTouchableHandle()

G4TouchableHandle G4PathFinder::CreateTouchableHandle ( G4int navId ) const

Definition at line 769 of file G4PathFinder.cc.

{
#ifdef G4DEBUG_PATHFINDER
  if( fVerboseLevel > 2 )
  {
    G4cout << "G4PathFinder::CreateTouchableHandle : navId = "
           << navId << " -- " << GetNavigator(navId) << G4endl;
  }
#endif
 
  G4TouchableHistory* touchHist;
  touchHist = GetNavigator(navId)->CreateTouchableHistory(); 
 
  G4VPhysicalVolume* locatedVolume = fLocatedVolume[navId]; 
  if( locatedVolume == nullptr )
  {
     // Workaround to ensure that the touchable is fixed !! // TODO: fix
 
     touchHist->UpdateYourself( locatedVolume, touchHist->GetHistory() );
  }
 
#ifdef G4DEBUG_PATHFINDER
  if( fVerboseLevel > 2 )
  {   
    G4String VolumeName("None"); 
    if( locatedVolume ) { VolumeName = locatedVolume->GetName(); }
    G4cout << " Touchable History created at address " << touchHist
           << "; volume = " << locatedVolume << "; name= " << VolumeName
           << G4endl;
  }
#endif
 
  return G4TouchableHandle(touchHist); 
}

Referenced by G4ImportanceProcess::PostStepDoIt(), G4WeightCutOffProcess::PostStepDoIt(), G4WeightWindowProcess::PostStepDoIt(), G4ParallelWorldProcess::PostStepDoIt(), G4ParallelWorldScoringProcess::PostStepDoIt(), G4CoupledTransportation::PostStepDoIt(), G4ImportanceProcess::StartTracking(), G4WeightCutOffProcess::StartTracking(), G4WeightWindowProcess::StartTracking(), G4ParallelWorldProcess::StartTracking(), and G4ParallelWorldScoringProcess::StartTracking().

◆ DoNextCurvedStep()

G4double G4PathFinder::DoNextCurvedStep	(	const G4FieldTrack &	FieldTrack,
		G4double	proposedStepLength,
		G4VPhysicalVolume *	pCurrentPhysVolume
	)

protected

Definition at line 1146 of file G4PathFinder.cc.

{
  const G4double toleratedRelativeError = 1.0e-10; 
  G4double minStep= kInfinity, newSafety = 0.0;
  G4int numNav; 
  G4FieldTrack fieldTrack = initialState;
  G4ThreeVector startPoint = initialState.GetPosition(); 
 
 
  G4EquationOfMotion* equationOfMotion = 
     fpFieldPropagator->GetCurrentEquationOfMotion();
 
  equationOfMotion->SetChargeMomentumMass( *(initialState.GetChargeState()), 
                                           initialState.GetMomentum().mag(),
                                           initialState.GetRestMass() );
  
#ifdef G4DEBUG_PATHFINDER
  G4int prc = G4cout.precision(9);
  if( fVerboseLevel > 2 )
  {
    G4cout << " G4PathFinder::DoNextCurvedStep ****** " << G4endl;
    G4cout << " Initial value of field track is " << fieldTrack 
           << " and proposed step= " << proposedStepLength  << G4endl;
  }
#endif
 
  fPreStepCenterRenewed = true; // Always update PreSafety with PreStep point
 
  if( fNoActiveNavigators > 1 )
  { 
     // Calculate the safety values before making the step
 
     G4double minSafety= kInfinity, safety; 
     for( numNav=0; numNav < fNoActiveNavigators; ++numNav )
     {
        safety= fpNavigator[numNav]->ComputeSafety( startPoint,DBL_MAX,false );
        fPreSafetyValues[numNav] = safety; 
        fCurrentPreStepSafety[numNav] = safety; 
        minSafety = std::min( safety, minSafety ); 
     }
 
     // Save safety value, related position
 
     fPreSafetyLocation = startPoint;   
     fPreSafetyMinValue = minSafety;
     fPreStepLocation = startPoint;
     fMinSafety_PreStepPt = minSafety;
  }
 
  // Allow Propagator In Field to do the hard work, calling G4MultiNavigator
  //
  minStep = fpFieldPropagator->ComputeStep( fieldTrack,
                                            proposedStepLength,
                                            newSafety, 
                                            pCurrentPhysicalVolume,
                                            false);
 
  // fieldTrack now contains the endpoint information
  //
  fEndState = fieldTrack; 
  fMinStep = minStep; 
  fTrueMinStep = std::min( minStep, proposedStepLength );
 
  if( fNoActiveNavigators == 1 )
  { 
     // Update the 'PreSafety' sphere - as any ComputeStep was called 
     // (must be done anyway in field)
 
     fPreSafetyValues[0] = newSafety;
     fPreSafetyLocation = startPoint;   
     fPreSafetyMinValue = newSafety;
 
     // Update the current 'PreStep' point's values - mandatory
     //
     fCurrentPreStepSafety[0] = newSafety; 
     fPreStepLocation = startPoint;
     fMinSafety_PreStepPt= newSafety;
  }
 
#ifdef G4DEBUG_PATHFINDER
  if( fVerboseLevel > 2 )
  {
    G4cout << "G4PathFinder::DoNextCurvedStep : " << G4endl
           << " initialState = " << initialState << G4endl
           << " and endState = " << fEndState << G4endl;
    G4cout << "G4PathFinder::DoNextCurvedStep : " 
           << " minStep = " << minStep 
           << " proposedStepLength " << proposedStepLength 
           << " safety = " << newSafety << G4endl;
  }
#endif
  G4double currentStepSize;   // = 0.0; 
  if( minStep < proposedStepLength ) // if == , then a boundary found at end ??
  {   
    // Recover the remaining information from MultiNavigator
    // especially regarding which Navigator limited the step
 
    G4int noLimited = 0;  //   No geometries limiting step
    for( numNav=0; numNav < fNoActiveNavigators; ++numNav )
    {
      G4double finalStep, lastPreSafety = 0.0, minStepLast;
      ELimited didLimit; 
      G4bool limited; 
 
      finalStep=  fpMultiNavigator->ObtainFinalStep( numNav, lastPreSafety, 
                                                     minStepLast, didLimit );
 
      // Calculate the step for this geometry, using the 
      // final step (the only one which can differ.)
 
      currentStepSize = fTrueMinStep;  
      G4double diffStep = 0.0; 
      if( (minStepLast != kInfinity) )
      { 
        diffStep = (finalStep-minStepLast);
        if ( std::abs(diffStep) <= toleratedRelativeError * finalStep ) 
        {
          diffStep = 0.0;
        }
        currentStepSize += diffStep; 
      }
      fCurrentStepSize[numNav] = currentStepSize;  
      
      // TODO: could refine the way to obtain safeties for > 1 geometries
      //     - for pre step safety
      //        notify MultiNavigator about new set of sub-steps
      //        allow it to return this value in ObtainFinalStep 
      //        instead of lastPreSafety (or as well?)
      //     - for final step start (available)
      //        get final Step start from MultiNavigator
      //        and corresponding safety values
      // and/or ALSO calculate ComputeSafety at endpoint
      //     endSafety= fpNavigator[numNav]->ComputeSafety( endPoint ); 
 
      fLimitedStep[numNav] = didLimit; 
      fLimitTruth[numNav] = limited = (didLimit != kDoNot ); 
      if( limited ) { ++noLimited; }
 
#ifdef G4DEBUG_PATHFINDER
      G4bool StepError = (currentStepSize < 0) 
                      || ( (minStepLast != kInfinity) && (diffStep < 0) ) ; 
      if( StepError || (fVerboseLevel > 2) )
      {
        G4String  limitedString =  LimitedString( fLimitedStep[numNav] ); 
        
        G4cout << " G4PathFinder::ComputeStep. Geometry " << numNav
               << "  step= " << fCurrentStepSize[numNav] 
               << " from final-step= " << finalStep 
               << " fTrueMinStep= " << fTrueMinStep 
               << " minStepLast= "  << minStepLast 
               << "  limited = " << (fLimitTruth[numNav] ? "YES" : " NO")
               << " ";
        G4cout << "  status = " << limitedString << " #= " << didLimit
               << G4endl;
        
        if( StepError )
        { 
          std::ostringstream message;
          message << "Incorrect calculation of step size for one navigator"
                  << G4endl
                  << "        currentStepSize = " << currentStepSize 
                  << ", diffStep= " << diffStep << G4endl
                  << "ERROR in computing step size for this navigator.";
          G4Exception("G4PathFinder::DoNextCurvedStep",
                      "GeomNav0003", FatalException, message);
        }
      }
#endif
    } // for num Navigators
 
    fNoGeometriesLimiting = noLimited;  // Save # processes limiting step
  } 
  else if ( (minStep == proposedStepLength)  
            || (minStep == kInfinity)  
            || ( std::abs(minStep-proposedStepLength)
               < toleratedRelativeError * proposedStepLength ) )
  { 
    // In case the step was not limited, use default responses
    //  --> all Navigators 
    // Also avoid problems in case of PathFinder using safety to optimise
    //  - it is possible that the Navigators were not called
    //    if the safety was already satisfactory.
    //    (In that case calling ObtainFinalStep gives invalid results.)
 
    currentStepSize = minStep;
    for( numNav=0; numNav < fNoActiveNavigators; ++numNav )
    {
      fCurrentStepSize[numNav] = minStep; 
      // Safety for endpoint ??  // Can eventuall improve it -- see TODO above
      fLimitedStep[numNav] = kDoNot; 
      fLimitTruth[numNav] = false; 
    }
    fNoGeometriesLimiting = 0;  // Save # processes limiting step
  } 
  else    //  (minStep > proposedStepLength) and not (minStep == kInfinity)
  {
    std::ostringstream message;
    message << "Incorrect calculation of step size for one navigator." << G4endl
            << "        currentStepSize = " << minStep << " is larger than "
            << " proposed StepSize = " << proposedStepLength << ".";
    G4Exception("G4PathFinder::DoNextCurvedStep()",
                "GeomNav0003", FatalException, message); 
  }
 
#ifdef G4DEBUG_PATHFINDER
  if( fVerboseLevel > 2 )
  {
    G4cout << " Exiting G4PathFinder::DoNextCurvedStep " << G4endl;
    PrintLimited(); 
  }
  G4cout.precision(prc); 
#endif
 
  return minStep; 
}

Referenced by ComputeStep().

◆ DoNextLinearStep()

G4double G4PathFinder::DoNextLinearStep	(	const G4FieldTrack &	FieldTrack,
		G4double	proposedStepLength
	)

protected

Definition at line 805 of file G4PathFinder.cc.

{
  std::vector<G4Navigator*>::iterator pNavigatorIter;
  G4double safety = 0.0, step =0.0;
  G4double minSafety = kInfinity, minStep = kInfinity;
     
  const G4int IdTransport = 0;  // Id of Mass Navigator !!
  G4int num = 0; 
 
#ifdef G4DEBUG_PATHFINDER
  if( fVerboseLevel > 2 )
  {
    G4cout << " G4PathFinder::DoNextLinearStep : entered " << G4endl;
    G4cout << "   Input field track= " << initialState << G4endl;
    G4cout << "   Requested step= " << proposedStepLength << G4endl;
  }
#endif
 
  G4ThreeVector initialPosition = initialState.GetPosition(); 
  G4ThreeVector initialDirection = initialState.GetMomentumDirection();
  
  G4ThreeVector OriginShift = initialPosition - fPreSafetyLocation;
  G4double      MagSqShift  = OriginShift.mag2() ;
  G4double      MagShift;  // Only given value if it larger than minimum safety
 
  // Potential optimisation using Maximum Value of safety!
  // if( MagSqShift >= sqr(fPreSafetyMaxValue ) ){ 
  //   MagShift= kInfinity;   // Not a useful value -- all will not use/ignore
  // else
  //  MagShift= std::sqrt(MagSqShift) ;
 
  MagShift= std::sqrt(MagSqShift) ;
 
#ifdef G4PATHFINDER_OPTIMISATION
 
  G4double fullSafety;  // For all geometries, for prestep point
 
  if( MagSqShift >= sqr(fPreSafetyMinValue) )
  {
     fullSafety = 0.0 ;     
  }
  else
  {
     fullSafety = fPreSafetyMinValue - MagShift;
  }
  if( proposedStepLength < fullSafety ) 
  {
     // Move is smaller than all safeties
     //  -> so we do not have to move the safety center
 
     fPreStepCenterRenewed = false;
 
     for( num=0; num< fNoActiveNavigators; ++num )
     {
        fCurrentStepSize[num] = kInfinity; 
        safety = std::max( 0.0,  fPreSafetyValues[num] - MagShift); 
        minSafety= std::min( safety, minSafety ); 
        fCurrentPreStepSafety[num] = safety; 
     }
     minStep = kInfinity;
 
#ifdef G4DEBUG_PATHFINDER
     if( fVerboseLevel > 2 )
     {
       G4cout << "G4PathFinder::DoNextLinearStep : Quick Stepping. " << G4endl
               << " proposedStepLength " <<  proposedStepLength
               << " < (full) safety = " << fullSafety 
               << " at " << initialPosition 
               << G4endl;
     }
#endif
  }
  else
#endif   // End of G4PATHFINDER_OPTIMISATION 1
  {
     // Move is larger than at least one of the safeties
     //  -> so we must move the safety center!
 
     fPreStepCenterRenewed = true;
     pNavigatorIter = fpTransportManager-> GetActiveNavigatorsIterator();
 
     minStep = kInfinity;  // Not proposedStepLength; 
 
     for( num=0; num< fNoActiveNavigators; ++pNavigatorIter,++num ) 
     {
        safety = std::max( 0.0,  fPreSafetyValues[num] - MagShift); 
 
#ifdef G4PATHFINDER_OPTIMISATION
        if( proposedStepLength <= safety )  // Should be just < safety ?
        {
           // The Step is guaranteed to be taken
 
           step = kInfinity;    //  ComputeStep Would return this
 
#ifdef G4DEBUG_PATHFINDER
           G4cout.precision(8); 
           G4cout << "PathFinder::ComputeStep> small proposed step = "
                  << proposedStepLength
                  << " <=  safety = " << safety << " for nav " << num 
                  << " Step fully taken. " << G4endl;
#endif
        }
        else
#endif   // End of G4PATHFINDER_OPTIMISATION 2
        {
#ifdef G4DEBUG_PATHFINDER
           G4double previousSafety = safety; 
#endif
           step = (*pNavigatorIter)->ComputeStep( initialPosition, 
                                                  initialDirection,
                                                  proposedStepLength,
                                                  safety );
           minStep = std::min(step, minStep);  // OLD ==> can be 'logical'
                                               // value, ie. kInfinity
           
#ifdef G4DEBUG_PATHFINDER
           if( fVerboseLevel > 0)
           {
             G4cout.precision(8); 
             G4cout << "PathFinder::ComputeStep> long  proposed step = "
                    << proposedStepLength
                    << "  >  safety = " << previousSafety
                    << " for nav " << num 
                    << " .  New safety = " << safety << " step= " << step
                    << G4endl;      
           } 
#endif
        }
        fCurrentStepSize[num] = step;   // Raw value - can be kInfinity
 
           //  TODO: consider whether/how to reduce the proposed step
           //        to the latest minStep value - to reduce calculations.
           //        ( If so, much change 1st minimum above. )
        
        // Save safety value, must be done for all geometries "together"
        // (even if not recomputed using call to ComputeStep)
        // since they share the fPreSafetyLocation
 
        fPreSafetyValues[num] = safety; 
        fCurrentPreStepSafety[num] = safety; 
 
        minSafety = std::min( safety, minSafety ); 
           
#ifdef G4DEBUG_PATHFINDER
        if( fVerboseLevel > 2 )
        {
          G4cout << "G4PathFinder::DoNextLinearStep : Navigator ["
                 << num << "] -- step size " << step << G4endl;
        }
#endif
     }
 
     // Only change these when safety is recalculated
     // it is good/relevant only for safety calculations
 
     fPreSafetyLocation =  initialPosition; 
     fPreSafetyMinValue =  minSafety;
  } // end of else for  if( proposedStepLength <= fullSafety)
 
  // For use in Relocation, need PreStep point location, min-safety
  //
  fPreStepLocation = initialPosition; 
  fMinSafety_PreStepPt = minSafety; 
 
  fMinStep = minStep; 
 
  if( fMinStep == kInfinity )
  {
     minStep = proposedStepLength;   //  Use this below for endpoint !!
  }
  fTrueMinStep = minStep;
 
  // Set the EndState
 
  G4ThreeVector endPosition;
 
  fEndState = initialState; 
  endPosition = initialPosition + minStep * initialDirection ; 
 
#ifdef G4DEBUG_PATHFINDER
  if( fVerboseLevel > 1 )
  {
    G4int oldPrec= G4cout.precision(14);     
    G4cout << "G4PathFinder::DoNextLinearStep : "
           << " initialPosition = " << initialPosition 
           << " and endPosition = " << endPosition<< G4endl;
    G4cout.precision(oldPrec);    
  }
#endif
 
  fEndState.SetPosition( endPosition ); 
  fEndState.SetProperTimeOfFlight( -1.000 );   // Not defined YET
 
  if( fNoActiveNavigators == 1 )
  { 
     G4bool transportLimited = (fMinStep!= kInfinity); 
     fLimitTruth[IdTransport] = transportLimited; 
     fLimitedStep[IdTransport] = transportLimited ? kUnique : kDoNot;
 
     // Set fNoGeometriesLimiting - as WhichLimited does
     fNoGeometriesLimiting = transportLimited ? 1 : 0;  
  }
  else
  {
     WhichLimited(); 
  }
 
#ifdef G4DEBUG_PATHFINDER
  if( fVerboseLevel > 2 )
  {
    G4cout << " G4PathFinder::DoNextLinearStep : exits returning "
           << minStep << G4endl;
    G4cout << " - Endpoint values = " << fEndState << G4endl;
    G4cout << G4endl;
  }
#endif
 
  return minStep;
}

Referenced by ComputeStep().

◆ EnableParallelNavigation()

void G4PathFinder::EnableParallelNavigation ( G4bool enableChoice = true )

Definition at line 115 of file G4PathFinder.cc.

{
   G4Navigator *navigatorForPropagation = nullptr, *massNavigator = nullptr;
 
   massNavigator = fpTransportManager->GetNavigatorForTracking(); 
   if( enableChoice )
   {
      navigatorForPropagation = fpMultiNavigator;
 
      // Enable SafetyHelper to use PF
      //
      fpTransportManager->GetSafetyHelper()->EnableParallelNavigation(true);
   }
   else
   {
      navigatorForPropagation = massNavigator;
       
      // Disable SafetyHelper to use PF
      //
      fpTransportManager->GetSafetyHelper()->EnableParallelNavigation(false);
   }
   fpFieldPropagator->SetNavigatorForPropagating(navigatorForPropagation);
}

Referenced by EndTrack(), and PrepareNewTrack().

◆ EndTrack()

void G4PathFinder::EndTrack ( )

Definition at line 432 of file G4PathFinder.cc.

{
  EnableParallelNavigation(false);  // Else it will be continue to be used
}

Referenced by G4CoupledTransportation::EndTracking().

◆ GetCurrentSafety()

G4double G4PathFinder::GetCurrentSafety ( ) const

inline

Definition at line 309 of file G4PathFinder.hh.

{
  return fMinSafety_PreStepPt;
}

Referenced by G4CoupledTransportation::AlongStepGetPhysicalInteractionLength().

◆ GetInstance()

G4PathFinder * G4PathFinder::GetInstance ( )

static

Definition at line 52 of file G4PathFinder.cc.

{
   if( fpPathFinder == nullptr )
   {
     fpPathFinder = new G4PathFinder; 
   }
   return fpPathFinder;
}

Referenced by G4CoupledTransportation::G4CoupledTransportation(), G4FastSimulationManagerProcess::G4FastSimulationManagerProcess(), G4ImportanceProcess::G4ImportanceProcess(), G4ParallelGeometriesLimiterProcess::G4ParallelGeometriesLimiterProcess(), G4ParallelWorldProcess::G4ParallelWorldProcess(), G4ParallelWorldScoringProcess::G4ParallelWorldScoringProcess(), G4WeightCutOffProcess::G4WeightCutOffProcess(), G4WeightWindowProcess::G4WeightWindowProcess(), G4SafetyHelper::InitialiseNavigator(), and G4ITSafetyHelper::InitialiseNavigator().

◆ GetInstanceIfExist()

G4PathFinder * G4PathFinder::GetInstanceIfExist ( )

static

Definition at line 66 of file G4PathFinder.cc.

{
   return fpPathFinder;
}

Referenced by G4RunManagerKernel::~G4RunManagerKernel().

◆ GetLocatedVolume()

G4VPhysicalVolume * G4PathFinder::GetLocatedVolume ( G4int navId ) const

inline

Definition at line 284 of file G4PathFinder.hh.

{
  G4VPhysicalVolume* vol = nullptr;  
  if( (navId < fMaxNav) && (navId >= 0) ) { vol= fLocatedVolume[navId]; }
  return vol; 
}

Referenced by G4FastSimulationManagerProcess::AtRestGetPhysicalInteractionLength(), G4ParallelGeometriesLimiterProcess::PostStepGetPhysicalInteractionLength(), G4FastSimulationManagerProcess::PostStepGetPhysicalInteractionLength(), and G4ParallelGeometriesLimiterProcess::StartTracking().

◆ GetMaxLoopCount()

G4int G4PathFinder::GetMaxLoopCount ( ) const

inline

◆ GetMinimumStep()

G4double G4PathFinder::GetMinimumStep ( ) const

inline

Definition at line 298 of file G4PathFinder.hh.

{ 
  return fMinStep; 
} 

◆ GetNavigator()

G4Navigator * G4PathFinder::GetNavigator ( G4int n ) const

inlineprotected

Definition at line 319 of file G4PathFinder.hh.

{ 
  if( (n>fNoActiveNavigators) || (n<0) ) { n=0; }
  return fpNavigator[n];
}

Referenced by CreateTouchableHandle(), and PrintLimited().

◆ GetNumberGeometriesLimitingStep()

unsigned int G4PathFinder::GetNumberGeometriesLimitingStep ( ) const

inline

Definition at line 303 of file G4PathFinder.hh.

{
  unsigned int noGeometries = fNoGeometriesLimiting;
  return noGeometries;
}

Referenced by G4CoupledTransportation::AlongStepGetPhysicalInteractionLength().

◆ IsParticleLooping()

G4bool G4PathFinder::IsParticleLooping ( ) const

inline

◆ LastPreSafety()

G4double G4PathFinder::LastPreSafety	(	G4int	navId,
		G4ThreeVector &	globalCenterPoint,
		G4double &	minSafety
	)

inline

Definition at line 333 of file G4PathFinder.hh.

{
  globalCenterPoint = fPreSafetyLocation;
  minSafety =         fPreSafetyMinValue;
  return  fPreSafetyValues[ navId ];
}

◆ LimitedString()

G4String & G4PathFinder::LimitedString ( ELimited lim )

Definition at line 1364 of file G4PathFinder.cc.

{
  static G4String StrDoNot("DoNot"),
                  StrUnique("Unique"),
                  StrUndefined("Undefined"),
                  StrSharedTransport("SharedTransport"),  
                  StrSharedOther("SharedOther");
 
  G4String* limitedStr;
  switch ( lim )
  {
     case kDoNot:  limitedStr = &StrDoNot; break;
     case kUnique: limitedStr = &StrUnique; break; 
     case kSharedTransport:  limitedStr = &StrSharedTransport; break; 
     case kSharedOther: limitedStr = &StrSharedOther; break;
     default: limitedStr = &StrUndefined; break;
  }
  return *limitedStr;
}

Referenced by DoNextCurvedStep(), and PrintLimited().

◆ Locate()

void G4PathFinder::Locate	(	const G4ThreeVector &	position,
		const G4ThreeVector &	direction,
		G4bool	relativeSearch = `true`
	)

Definition at line 461 of file G4PathFinder.cc.

{
  // Locate the point in each geometry
 
  auto pNavIter = fpTransportManager->GetActiveNavigatorsIterator(); 
 
  G4ThreeVector lastEndPosition = fRelocatedPoint
                                ? fLastLocatedPosition
                                : fEndState.GetPosition();
  fLastLocatedPosition = position; 
 
#ifdef G4DEBUG_PATHFINDER
  static const G4double movLenTol = 10*sqr(kCarTolerance);
 
  G4ThreeVector moveVec = ( position - lastEndPosition );
  G4double      moveLenSq = moveVec.mag2();
  if( (!fNewTrack) && ( moveLenSq > movLenTol ) )
  {
     ReportMove( lastEndPosition, position,
                 " (End) Position / G4PathFinder::Locate" ); 
  }
 
  if( fVerboseLevel > 2 )
  {
    G4cout << G4endl; 
    G4cout << " G4PathFinder::Locate : entered " << G4endl;
    G4cout << " --------------------   -------" <<  G4endl;
    G4cout << "   Locating at position " << position
           << "  with direction " << direction 
           << "  relative= " << relative << G4endl;
    if ( (fVerboseLevel > 1) || ( moveLenSq > 0.0) )
    { 
       G4cout << "  lastEndPosition = " << lastEndPosition
              << "  moveVec = " << moveVec
              << "  newTr = " << fNewTrack 
              << "  relocated = " << fRelocatedPoint << G4endl;
    }
 
    G4cout << " Located at " << position ; 
    if( fNoActiveNavigators > 1 )  { G4cout << G4endl; }
  }
#endif
 
  for ( auto num=0; num<fNoActiveNavigators ; ++pNavIter,++num )
  {
     //  ... who limited the step ....
 
     if( fLimitTruth[num] ) { (*pNavIter)->SetGeometricallyLimitedStep(); }
 
     G4VPhysicalVolume *pLocated= 
     (*pNavIter)->LocateGlobalPointAndSetup( position, &direction,
                                             relative,  
                                             false);   
     // Set the state related to the location
     //
     fLocatedVolume[num] = pLocated; 
 
     // Clear state related to the step
     //
     fLimitedStep[num] = kDoNot; 
     fCurrentStepSize[num] = 0.0;      
    
#ifdef G4DEBUG_PATHFINDER
     if( fVerboseLevel > 2 )
     {
       G4cout << " - In world " << num << " geomLimStep= " << fLimitTruth[num]
              << "  gives volume= " << pLocated ; 
       if( pLocated )
       { 
         G4cout << "  name = '" << pLocated->GetName() << "'"; 
         G4cout << " - CopyNo= " << pLocated->GetCopyNo(); 
       } 
       G4cout  << G4endl; 
     }
#endif
  }
 
  fRelocatedPoint = false;
}

Referenced by ComputeStep(), G4SafetyHelper::Locate(), G4ITSafetyHelper::Locate(), G4CoupledTransportation::PostStepDoIt(), and PrepareNewTrack().

◆ MovePoint()

void G4PathFinder::MovePoint ( )

inline

Definition at line 314 of file G4PathFinder.hh.

{
  fRelocatedPoint = true;
}

Referenced by ComputeStep(), and PrepareNewTrack().

◆ ObtainSafety()

G4double G4PathFinder::ObtainSafety	(	G4int	navId,
		G4ThreeVector &	globalCenterPoint
	)

inline

Definition at line 326 of file G4PathFinder.hh.

{
  globalCenterPoint = fSafetyLocation; 
  return fNewSafetyComputed[ navId ];
}

Referenced by G4CoupledTransportation::AlongStepGetPhysicalInteractionLength().

◆ PrepareNewTrack()

void G4PathFinder::PrepareNewTrack	(	const G4ThreeVector &	position,
		const G4ThreeVector &	direction,
		G4VPhysicalVolume *	massStartVol = `nullptr`
	)

Definition at line 342 of file G4PathFinder.cc.

{
  // Key purposes:
  //   - Check and cache set of active navigators
  //   - Reset state for new track
 
  G4int num=0; 
 
  EnableParallelNavigation(true); 
    // Switch PropagatorInField to use MultiNavigator
 
  fpTransportManager->GetSafetyHelper()->InitialiseHelper(); 
    // Reinitialise state of safety helper -- avoid problems with overlaps
 
  fNewTrack = true; 
  this->MovePoint();   // Signal further that the last status is wiped
 
  fpFieldPropagator->PrepareNewTrack(); // Inform field propagator of new track
  
  // Message the G4NavigatorPanel / Dispatcher to find active navigators
  //
  std::vector<G4Navigator*>::iterator pNavigatorIter; 
 
  fNoActiveNavigators = (G4int)fpTransportManager-> GetNoActiveNavigators();
  if( fNoActiveNavigators > fMaxNav )
  {
    std::ostringstream message;
    message << "Too many active Navigators / worlds." << G4endl
            << "        Transportation Manager has "
            << fNoActiveNavigators << " active navigators." << G4endl
            << "        This is more than the number allowed = "
            << fMaxNav << " !";
    G4Exception("G4PathFinder::PrepareNewTrack()", "GeomNav0002",  
                FatalException, message); 
  }
 
  fpMultiNavigator->PrepareNavigators(); 
  //------------------------------------
 
  pNavigatorIter = fpTransportManager->GetActiveNavigatorsIterator();
  for( num=0; num< fNoActiveNavigators; ++pNavigatorIter,++num )
  {
     // Keep information in C-array ... for creating touchables - at least
     //
     fpNavigator[num] = *pNavigatorIter;   
     fLimitTruth[num] = false;
     fLimitedStep[num] = kDoNot;
     fCurrentStepSize[num] = 0.0; 
     fLocatedVolume[num] = nullptr; 
  }
  fNoGeometriesLimiting = 0;  // At start of track, no process limited step
 
  // In case of one geometry, the tracking will have done the locating!!
 
  if( fNoActiveNavigators > 1 )
  {
     Locate( position, direction, false );   
  }
  else
  {
     // Update state -- depending on the tracking's call to Mass Navigator
 
     fLastLocatedPosition = position; 
     fLocatedVolume[0] = massStartVol; // This information must be given
                                       // by transportation
     fLimitedStep[0] = kDoNot; 
     fCurrentStepSize[0] = 0.0;
  }
 
  // Reset Safety Information -- as in case of overlaps this can cause
  // inconsistencies ...
  //
  fMinSafety_PreStepPt = fPreSafetyMinValue = fMinSafety_atSafLocation = 0.0; 
 
  for( num=0; num<fNoActiveNavigators; ++num )
  {
     fPreSafetyValues[num] = 0.0; 
     fNewSafetyComputed[num] = 0.0; 
     fCurrentPreStepSafety[num] = 0.0;
  }
 
  // The first location for each Navigator must be non-relative
  // or else call ResetStackAndState() for each Navigator
 
  fRelocatedPoint = false; 
}

Referenced by G4ParallelGeometriesLimiterProcess::StartTracking(), G4ImportanceProcess::StartTracking(), G4WeightCutOffProcess::StartTracking(), G4WeightWindowProcess::StartTracking(), G4FastSimulationManagerProcess::StartTracking(), G4ParallelWorldProcess::StartTracking(), G4ParallelWorldScoringProcess::StartTracking(), and G4CoupledTransportation::StartTracking().

◆ PrintLimited()

void G4PathFinder::PrintLimited ( )

protected

Definition at line 1086 of file G4PathFinder.cc.

{
  // Report results -- for checking   
 
  G4cout << "G4PathFinder::PrintLimited reports: " ; 
  G4cout << "  Minimum step (true)= " << fTrueMinStep 
         << "  reported min = " << fMinStep 
         << G4endl; 
  if(  (fCurrentStepNo <= 2) || (fVerboseLevel>=2) )
  {
    G4cout << std::setw(5) << " Step#"  << " "
           << std::setw(5) << " NavId"  << " "
           << std::setw(12) << " step-size " << " "
           << std::setw(12) << " raw-size "  << " "
           << std::setw(12) << " pre-safety " << " " 
           << std::setw(15) << " Limited / flag"  << " "
           << std::setw(15) << "  World "  << " "
           << G4endl;  
  }
  for ( auto num = 0; num < fNoActiveNavigators; ++num )
  { 
    G4double rawStep = fCurrentStepSize[num]; 
    G4double stepLen = fCurrentStepSize[num]; 
    if( stepLen > fTrueMinStep )
    { 
      stepLen = fTrueMinStep;     // did not limit (went as far as asked)
    }
    G4long oldPrec = G4cout.precision(9); 
 
    G4cout << std::setw(5) << fCurrentStepNo  << " " 
           << std::setw(5) << num  << " "
           << std::setw(12) << stepLen << " "
           << std::setw(12) << rawStep << " "
           << std::setw(12) << fCurrentPreStepSafety[num] << " "
           << std::setw(5) << (fLimitTruth[num] ? "YES" : " NO") << " ";
    G4String limitedStr= LimitedString(fLimitedStep[num]); 
    G4cout << " " << std::setw(15) << limitedStr << " ";  
    G4cout.precision(oldPrec); 
 
    G4Navigator* pNav = GetNavigator( num ); 
    G4String  WorldName( "Not-Set" ); 
    if (pNav != nullptr)
    {
       G4VPhysicalVolume *pWorld = pNav->GetWorldVolume(); 
       if( pWorld )
       {
          WorldName = pWorld->GetName(); 
       }
    }
    G4cout << " " << WorldName ; 
    G4cout << G4endl;
  }
 
  if( fVerboseLevel > 4 )
  {
    G4cout << " G4PathFinder::PrintLimited - exiting. " << G4endl;
  }
}

Referenced by DoNextCurvedStep(), and WhichLimited().

◆ PushPostSafetyToPreSafety()

void G4PathFinder::PushPostSafetyToPreSafety ( )

Definition at line 1384 of file G4PathFinder.cc.

{
  fPreSafetyLocation = fSafetyLocation;
  fPreSafetyMinValue = fMinSafety_atSafLocation;
  for( auto nav=0; nav < fNoActiveNavigators; ++nav )
  {
     fPreSafetyValues[nav] = fNewSafetyComputed[nav];
  }
}

◆ ReLocate()

void G4PathFinder::ReLocate ( const G4ThreeVector & position )

Definition at line 543 of file G4PathFinder.cc.

{
  // Locate the point in each geometry
 
  std::vector<G4Navigator*>::iterator pNavIter =
              fpTransportManager->GetActiveNavigatorsIterator(); 
 
#ifdef G4DEBUG_PATHFINDER
 
  // Check that this relocation does not violate safety
  //   - at endpoint (computed from start point) AND
  //   - at last safety location  (likely just called)
 
  G4ThreeVector lastEndPosition = fEndState.GetPosition();
 
  // Calculate end-point safety ...
  //
  G4double DistanceStartEnd = (lastEndPosition - fPreStepLocation).mag();
  G4double endPointSafety_raw = fMinSafety_PreStepPt - DistanceStartEnd; 
  G4double endPointSafety_Est1 = std::max( 0.0, endPointSafety_raw ); 
 
  // ... and check move from endpoint against this endpoint safety
  //
  G4ThreeVector moveVecEndPos  = position - lastEndPosition;
  G4double      moveLenEndPosSq = moveVecEndPos.mag2(); 
 
  // Check that move from endpoint of last step is within safety
  // -- or check against last location or relocation ?? 
  //
  G4ThreeVector moveVecSafety = position - fSafetyLocation; 
  G4double      moveLenSafSq = moveVecSafety.mag2();
 
  G4double distCheckEnd_sq = ( moveLenEndPosSq - endPointSafety_Est1 
                                                *endPointSafety_Est1 ); 
  G4double distCheckSaf_sq = ( moveLenSafSq - fMinSafety_atSafLocation
                                             *fMinSafety_atSafLocation ); 
 
  G4bool longMoveEnd = distCheckEnd_sq > 0.0; 
  G4bool longMoveSaf = distCheckSaf_sq > 0.0; 
 
  G4double revisedSafety = 0.0;
 
  if( (!fNewTrack) && ( longMoveEnd && longMoveSaf ) )
  {  
     // Recompute ComputeSafety for end position
     //
     revisedSafety = ComputeSafety(lastEndPosition); 
 
     const G4double kRadTolerance =
           G4GeometryTolerance::GetInstance()->GetRadialTolerance();
     const G4double cErrorTolerance = 1e-12;   
       // Maximum relative error from roundoff of arithmetic 
 
     G4double distCheckRevisedEnd = moveLenEndPosSq - sqr(revisedSafety);
 
     G4bool  longMoveRevisedEnd = ( distCheckRevisedEnd > 0. ) ; 
 
     G4double moveMinusSafety = 0.0; 
     G4double moveLenEndPosition = std::sqrt( moveLenEndPosSq );
     moveMinusSafety = moveLenEndPosition - revisedSafety; 
 
     if ( longMoveRevisedEnd && ( moveMinusSafety > 0.0 )
                             && ( revisedSafety > 0.0 ) )
     {
        // Take into account possibility of roundoff error causing
        // this apparent move further than safety
 
        if( fVerboseLevel > 0 )
        {
           G4cout << " G4PF:Relocate> Ratio to revised safety is " 
                  << std::fabs(moveMinusSafety)/revisedSafety << G4endl;
        }
 
        G4double absMoveMinusSafety = std::fabs(moveMinusSafety);
        G4bool smallRatio = absMoveMinusSafety < kRadTolerance * revisedSafety;
        G4double maxCoordPos = std::max( 
                                      std::max( std::fabs(position.x()), 
                                                std::fabs(position.y())), 
                                      std::fabs(position.z()) );
        G4bool smallValue= absMoveMinusSafety < cErrorTolerance * maxCoordPos;
        if( !(smallRatio || smallValue) )
        {
           G4cout << " G4PF:Relocate> Ratio to revised safety is " 
                  << std::fabs(moveMinusSafety)/revisedSafety << G4endl;
           G4cout << " Difference of move and safety is not very small."
                  << G4endl;
        }
        else
        {
          moveMinusSafety = 0.0; 
          longMoveRevisedEnd = false;   // Numerical issue -- not too long!
 
          G4cout << " Difference of move & safety is very small in magnitude, "
                 << absMoveMinusSafety << G4endl;
          if( smallRatio )
          {
            G4cout << " ratio to safety " << revisedSafety 
                   << " is " <<  absMoveMinusSafety / revisedSafety
                   << "smaller than " << kRadTolerance << " of safety ";
          }
          else
          {
            G4cout << " as fraction " << absMoveMinusSafety / maxCoordPos 
                   << " of position vector max-coord " << maxCoordPos
                   << " smaller than " << cErrorTolerance ;
          }
          G4cout << " -- reset moveMinusSafety to "
                 << moveMinusSafety << G4endl;
        }
     }
 
     if ( longMoveEnd && longMoveSaf
       && longMoveRevisedEnd && (moveMinusSafety>0.0) )
     { 
        std::ostringstream message;
        message.precision(9); 
        message << "ReLocation is further than end-safety value." << G4endl
                << " Moved from last endpoint by " << moveLenEndPosition 
                << " compared to end safety (from preStep point) = " 
                << endPointSafety_Est1 << G4endl
                << "  --> last PreSafety Location was " << fPreSafetyLocation
                << G4endl
                << "       safety value =  " << fPreSafetyMinValue << G4endl
                << "  --> last PreStep Location was " << fPreStepLocation
                << G4endl
                << "       safety value =  " << fMinSafety_PreStepPt << G4endl
                << "  --> last EndStep Location was " << lastEndPosition
                << G4endl
                << "       safety value =  " << endPointSafety_Est1 
                << " raw-value = " << endPointSafety_raw << G4endl
                << "  --> Calling again at this endpoint, we get "
                <<  revisedSafety << " as safety value."  << G4endl
                << "  --> last position for safety " << fSafetyLocation
                << G4endl
                << "       its safety value =  " << fMinSafety_atSafLocation
                << G4endl
                << "       move from safety location = "
                << std::sqrt(moveLenSafSq) << G4endl
                << "         again= " << moveVecSafety.mag() << G4endl
                << "       safety - Move-from-end= " 
                << revisedSafety - moveLenEndPosition
                << " (negative is Bad.)" << G4endl
                << " Debug:  distCheckRevisedEnd = "
                << distCheckRevisedEnd;
        ReportMove( lastEndPosition, position, "Position" ); 
        G4Exception("G4PathFinder::ReLocate", "GeomNav0003", 
                    FatalException, message); 
    }
  }
 
  if( fVerboseLevel > 2 )
  {
    G4cout << G4endl; 
    G4cout << " G4PathFinder::ReLocate : entered " << G4endl;
    G4cout << " ----------------------   -------" <<  G4endl;
    G4cout << "  *Re*Locating at position " << position  << G4endl; 
    if ( (fVerboseLevel > -1) || ( moveLenEndPosSq > 0.0) )
    {
       G4cout << "  lastEndPosition = " << lastEndPosition
              << "  moveVec from step-end = " << moveVecEndPos
              << "  is new Track = " << fNewTrack 
              << "  relocated = " << fRelocatedPoint << G4endl;
    }
  }
#endif // G4DEBUG_PATHFINDER
 
  for ( auto num=0; num< fNoActiveNavigators ; ++pNavIter,++num )
  {
     //  ... none limited the step
 
     (*pNavIter)->LocateGlobalPointWithinVolume( position ); 
 
     // Clear state related to the step
     //
     fLimitedStep[num] = kDoNot; 
     fCurrentStepSize[num] = 0.0;      
     fLimitTruth[num] = false;   
  }
 
  fLastLocatedPosition = position; 
  fRelocatedPoint = true;
 
#ifdef G4DEBUG_PATHFINDER
  if( fVerboseLevel > 2 )
  {
    G4cout << " G4PathFinder::ReLocate : exiting " 
           << "  at position " << fLastLocatedPosition << G4endl << G4endl;
  }
#endif
}

Referenced by G4CoupledTransportation::PostStepDoIt(), G4SafetyHelper::ReLocateWithinVolume(), and G4ITSafetyHelper::ReLocateWithinVolume().

◆ ReportMove()

void G4PathFinder::ReportMove	(	const G4ThreeVector &	OldV,
		const G4ThreeVector &	NewV,
		const G4String &	Quantity
	)		const

protected

Definition at line 440 of file G4PathFinder.cc.

{
    G4ThreeVector moveVec = ( NewVector - OldVector );
 
    std::ostringstream message;
    message.precision(16); 
    message << "Endpoint moved between value returned by ComputeStep()"
            << " and call to Locate(). " << G4endl
            << "          Change of " << Quantity << " is "
            << moveVec.mag() / mm << " mm long" << G4endl
            << "          and its vector is "
            << (1.0/mm) * moveVec << " mm " << G4endl
            << "          Endpoint of ComputeStep() was     " << OldVector
            << G4endl
            << "          and current position to locate is " << NewVector;
    G4Exception("G4PathFinder::ReportMove()", "GeomNav1002",  
                JustWarning, message); 
}

Referenced by Locate(), and ReLocate().

◆ SetMaxLoopCount()

void G4PathFinder::SetMaxLoopCount ( G4int new_max )

inline

◆ SetVerboseLevel()

G4int G4PathFinder::SetVerboseLevel ( G4int lev = -1 )

inline

Definition at line 291 of file G4PathFinder.hh.

{
  G4int old = fVerboseLevel;
  fVerboseLevel = newLevel;
  return old;
}

◆ UseSafetyForOptimization()

G4bool G4PathFinder::UseSafetyForOptimization ( G4bool )

inlineprotected

◆ WhichLimited()

void G4PathFinder::WhichLimited ( )

protected

Definition at line 1026 of file G4PathFinder.cc.

{
  // Flag which processes limited the step
 
  G4int num = -1, last = -1; 
  G4int noLimited = 0; 
  ELimited shared = kSharedOther; 
 
  const G4int IdTransport = 0;  // Id of Mass Navigator !!
 
  // Assume that [IdTransport] is Mass / Transport
  //
  G4bool transportLimited = (fCurrentStepSize[IdTransport] == fMinStep)
                         && (fMinStep != kInfinity); 
 
  if( transportLimited )
  { 
     shared= kSharedTransport;
  }
 
  for ( num = 0; num < fNoActiveNavigators; ++num )
  { 
    G4bool limitedStep;
 
    G4double step = fCurrentStepSize[num]; 
 
    limitedStep = ( std::fabs(step - fMinStep) < kCarTolerance ) 
               && ( step != kInfinity); 
 
    fLimitTruth[ num ] = limitedStep; 
    if( limitedStep )
    {
      ++noLimited;  
      fLimitedStep[num] = shared;
      last= num; 
    }
    else
    {
      fLimitedStep[num] = kDoNot;
    }
  }
  fNoGeometriesLimiting= noLimited;  // Save # processes limiting step
 
  if( (last > -1) && (noLimited == 1 ) )
  {
    fLimitedStep[ last ] = kUnique; 
  }
 
#ifdef G4DEBUG_PATHFINDER
  if( fVerboseLevel > 1 )
  {
    PrintLimited();   // --> for tracing 
    if( fVerboseLevel > 4 )
    {
      G4cout << " G4PathFinder::WhichLimited - exiting. " << G4endl;
    }
  }
#endif
}

Referenced by DoNextLinearStep().

The documentation for this class was generated from the following files:

Public Member Functions

Static Public Member Functions

Protected Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ ~G4PathFinder()

◆ G4PathFinder()

Member Function Documentation

◆ ComputeSafety()

◆ ComputeStep()

◆ CreateTouchableHandle()

◆ DoNextCurvedStep()

◆ DoNextLinearStep()

◆ EnableParallelNavigation()

◆ EndTrack()

◆ GetCurrentSafety()

◆ GetInstance()

◆ GetInstanceIfExist()

◆ GetLocatedVolume()

◆ GetMaxLoopCount()

◆ GetMinimumStep()

◆ GetNavigator()

◆ GetNumberGeometriesLimitingStep()

◆ IsParticleLooping()

◆ LastPreSafety()

◆ LimitedString()

◆ Locate()

◆ MovePoint()

◆ ObtainSafety()

◆ PrepareNewTrack()

◆ PrintLimited()

◆ PushPostSafetyToPreSafety()

◆ ReLocate()

◆ ReportMove()

◆ SetMaxLoopCount()

◆ SetVerboseLevel()

◆ UseSafetyForOptimization()

◆ WhichLimited()