#include <G4EllipticalCone.hh>

Inheritance diagram for G4EllipticalCone:

Public Member Functions
	G4EllipticalCone (const G4String &pName, G4double pxSemiAxis, G4double pySemiAxis, G4double zMax, G4double pzTopCut)

virtual	~G4EllipticalCone ()

G4double	GetSemiAxisMin () const

G4double	GetSemiAxisMax () const

G4double	GetSemiAxisX () const

G4double	GetSemiAxisY () const

G4double	GetZMax () const

G4double	GetZTopCut () const

void	SetSemiAxis (G4double x, G4double y, G4double z)

void	SetZCut (G4double newzTopCut)

G4double	GetCubicVolume ()

G4double	GetSurfaceArea ()

void	BoundingLimits (G4ThreeVector &pMin, G4ThreeVector &pMax) const

G4bool	CalculateExtent (const EAxis pAxis, const G4VoxelLimits &pVoxelLimit, const G4AffineTransform &pTransform, G4double &pMin, G4double &pMax) const

EInside	Inside (const G4ThreeVector &p) const

G4ThreeVector	SurfaceNormal (const G4ThreeVector &p) const

G4double	DistanceToIn (const G4ThreeVector &p, const G4ThreeVector &v) const

G4double	DistanceToIn (const G4ThreeVector &p) const

G4double	DistanceToOut (const G4ThreeVector &p, const G4ThreeVector &v, const G4bool calcNorm=false, G4bool validNorm=nullptr, G4ThreeVector n=nullptr) const

G4double	DistanceToOut (const G4ThreeVector &p) const

G4GeometryType	GetEntityType () const

G4VSolid *	Clone () const

G4ThreeVector	GetPointOnSurface () const

std::ostream &	StreamInfo (std::ostream &os) const

G4Polyhedron *	GetPolyhedron () const

void	DescribeYourselfTo (G4VGraphicsScene &scene) const

G4VisExtent	GetExtent () const

G4Polyhedron *	CreatePolyhedron () const

	G4EllipticalCone (__void__ &)

	G4EllipticalCone (const G4EllipticalCone &rhs)

G4EllipticalCone &	operator= (const G4EllipticalCone &rhs)

Public Member Functions inherited from G4VSolid
	G4VSolid (const G4String &name)

virtual	~G4VSolid ()

G4bool	operator== (const G4VSolid &s) const

G4String	GetName () const

void	SetName (const G4String &name)

G4double	GetTolerance () const

virtual void	BoundingLimits (G4ThreeVector &pMin, G4ThreeVector &pMax) const

virtual G4bool	CalculateExtent (const EAxis pAxis, const G4VoxelLimits &pVoxelLimit, const G4AffineTransform &pTransform, G4double &pMin, G4double &pMax) const =0

virtual EInside	Inside (const G4ThreeVector &p) const =0

virtual G4ThreeVector	SurfaceNormal (const G4ThreeVector &p) const =0

virtual G4double	DistanceToIn (const G4ThreeVector &p, const G4ThreeVector &v) const =0

virtual G4double	DistanceToIn (const G4ThreeVector &p) const =0

virtual G4double	DistanceToOut (const G4ThreeVector &p, const G4ThreeVector &v, const G4bool calcNorm=false, G4bool validNorm=nullptr, G4ThreeVector n=nullptr) const =0

virtual G4double	DistanceToOut (const G4ThreeVector &p) const =0

virtual void	ComputeDimensions (G4VPVParameterisation p, const G4int n, const G4VPhysicalVolume pRep)

virtual G4double	GetCubicVolume ()

virtual G4double	GetSurfaceArea ()

virtual G4GeometryType	GetEntityType () const =0

virtual G4ThreeVector	GetPointOnSurface () const

virtual G4VSolid *	Clone () const

virtual std::ostream &	StreamInfo (std::ostream &os) const =0

void	DumpInfo () const

virtual void	DescribeYourselfTo (G4VGraphicsScene &scene) const =0

virtual G4VisExtent	GetExtent () const

virtual G4Polyhedron *	CreatePolyhedron () const

virtual G4Polyhedron *	GetPolyhedron () const

virtual const G4VSolid *	GetConstituentSolid (G4int no) const

virtual G4VSolid *	GetConstituentSolid (G4int no)

virtual const G4DisplacedSolid *	GetDisplacedSolidPtr () const

virtual G4DisplacedSolid *	GetDisplacedSolidPtr ()

	G4VSolid (__void__ &)

	G4VSolid (const G4VSolid &rhs)

G4VSolid &	operator= (const G4VSolid &rhs)

G4double	EstimateCubicVolume (G4int nStat, G4double epsilon) const

G4double	EstimateSurfaceArea (G4int nStat, G4double ell) const

Protected Attributes
G4bool	fRebuildPolyhedron = false

G4Polyhedron *	fpPolyhedron = nullptr

Protected Attributes inherited from G4VSolid
G4double	kCarTolerance

Additional Inherited Members
Protected Member Functions inherited from G4VSolid
void	CalculateClippedPolygonExtent (G4ThreeVectorList &pPolygon, const G4VoxelLimits &pVoxelLimit, const EAxis pAxis, G4double &pMin, G4double &pMax) const

void	ClipCrossSection (G4ThreeVectorList *pVertices, const G4int pSectionIndex, const G4VoxelLimits &pVoxelLimit, const EAxis pAxis, G4double &pMin, G4double &pMax) const

void	ClipBetweenSections (G4ThreeVectorList *pVertices, const G4int pSectionIndex, const G4VoxelLimits &pVoxelLimit, const EAxis pAxis, G4double &pMin, G4double &pMax) const

void	ClipPolygon (G4ThreeVectorList &pPolygon, const G4VoxelLimits &pVoxelLimit, const EAxis pAxis) const

Detailed Description

Definition at line 87 of file G4EllipticalCone.hh.

Constructor & Destructor Documentation

◆ G4EllipticalCone() [1/3]

G4EllipticalCone::G4EllipticalCone	(	const G4String &	pName,
		G4double	pxSemiAxis,
		G4double	pySemiAxis,
		G4double	zMax,
		G4double	pzTopCut
	)

Definition at line 72 of file G4EllipticalCone.cc.

  : G4VSolid(pName), zTopCut(0.)
{
  halfCarTol = 0.5*kCarTolerance;
 
  // Check Semi-Axis & Z-cut
  //
  if ( (pxSemiAxis <= 0.) || (pySemiAxis <= 0.) || (pzMax <= 0.) )
  {
     std::ostringstream message;
     message << "Invalid semi-axis or height for solid: " << GetName()
             << "\n   X semi-axis, Y semi-axis, height = "
             << pxSemiAxis << ", " << pySemiAxis << ", " << pzMax;
     G4Exception("G4EllipticalCone::G4EllipticalCone()", "GeomSolids0002",
                 FatalErrorInArgument, message);
   }
 
  if ( pzTopCut <= 0 )
  {
     std::ostringstream message;
     message << "Invalid z-coordinate for cutting plane for solid: " << GetName()
             << "\n   Z top cut = " << pzTopCut;
     G4Exception("G4EllipticalCone::G4EllipticalCone()", "GeomSolids0002",
                 FatalErrorInArgument, message);
  }
 
  SetSemiAxis( pxSemiAxis, pySemiAxis, pzMax );
  SetZCut(pzTopCut);
}

◆ ~G4EllipticalCone()

G4EllipticalCone::~G4EllipticalCone ( )

virtual

Definition at line 122 of file G4EllipticalCone.cc.

{
  delete fpPolyhedron; fpPolyhedron = nullptr;
}

◆ G4EllipticalCone() [2/3]

G4EllipticalCone::G4EllipticalCone ( __void__ & a )

Definition at line 111 of file G4EllipticalCone.cc.

  : G4VSolid(a), halfCarTol(0.),
    xSemiAxis(0.), ySemiAxis(0.), zheight(0.), zTopCut(0.),
    cosAxisMin(0.), invXX(0.), invYY(0.)
{
}

◆ G4EllipticalCone() [3/3]

G4EllipticalCone::G4EllipticalCone ( const G4EllipticalCone & rhs )

Definition at line 131 of file G4EllipticalCone.cc.

  : G4VSolid(rhs), halfCarTol(rhs.halfCarTol),
    fCubicVolume(rhs.fCubicVolume), fSurfaceArea(rhs.fSurfaceArea),
    xSemiAxis(rhs.xSemiAxis), ySemiAxis(rhs.ySemiAxis),
    zheight(rhs.zheight), zTopCut(rhs.zTopCut),
    cosAxisMin(rhs.cosAxisMin), invXX(rhs.invXX), invYY(rhs.invYY)
{
}

Member Function Documentation

◆ BoundingLimits()

void G4EllipticalCone::BoundingLimits	(	G4ThreeVector &	pMin,
		G4ThreeVector &	pMax
	)		const

virtual

Reimplemented from G4VSolid.

Definition at line 172 of file G4EllipticalCone.cc.

{
  G4double zcut   = GetZTopCut();
  G4double height = GetZMax(); 
  G4double xmax   = GetSemiAxisX()*(height+zcut);
  G4double ymax   = GetSemiAxisY()*(height+zcut);
  pMin.set(-xmax,-ymax,-zcut);
  pMax.set( xmax, ymax, zcut);
 
  // Check correctness of the bounding box
  //
  if (pMin.x() >= pMax.x() || pMin.y() >= pMax.y() || pMin.z() >= pMax.z())
  {
    std::ostringstream message;
    message << "Bad bounding box (min >= max) for solid: "
            << GetName() << " !"
            << "\npMin = " << pMin
            << "\npMax = " << pMax;
    G4Exception("G4EllipticalCone::BoundingLimits()", "GeomMgt0001",
                JustWarning, message);
    DumpInfo();
  }
}

Referenced by CalculateExtent(), and GetExtent().

◆ CalculateExtent()

G4bool G4EllipticalCone::CalculateExtent	(	const EAxis	pAxis,
		const G4VoxelLimits &	pVoxelLimit,
		const G4AffineTransform &	pTransform,
		G4double &	pMin,
		G4double &	pMax
	)		const

virtual

Implements G4VSolid.

Definition at line 202 of file G4EllipticalCone.cc.

{
  G4ThreeVector bmin,bmax;
  G4bool exist;
 
  // Check bounding box (bbox)
  //
  BoundingLimits(bmin,bmax);
  G4BoundingEnvelope bbox(bmin,bmax);
#ifdef G4BBOX_EXTENT
  return bbox.CalculateExtent(pAxis,pVoxelLimit,pTransform,pMin,pMax);
#endif
  if (bbox.BoundingBoxVsVoxelLimits(pAxis,pVoxelLimit,pTransform,pMin,pMax))
  {
    return exist = (pMin < pMax) ? true : false;
  }
 
  // Set bounding envelope (benv) and calculate extent
  //
  static const G4int NSTEPS = 48; // number of steps for whole circle
  static const G4double ang = twopi/NSTEPS;
  static const G4double sinHalf = std::sin(0.5*ang);
  static const G4double cosHalf = std::cos(0.5*ang);
  static const G4double sinStep = 2.*sinHalf*cosHalf;
  static const G4double cosStep = 1. - 2.*sinHalf*sinHalf;
  G4double zcut   = bmax.z();
  G4double height = GetZMax(); 
  G4double sxmin  = GetSemiAxisX()*(height-zcut)/cosHalf;
  G4double symin  = GetSemiAxisY()*(height-zcut)/cosHalf;
  G4double sxmax  = bmax.x()/cosHalf;
  G4double symax  = bmax.y()/cosHalf;
 
  G4double sinCur = sinHalf;
  G4double cosCur = cosHalf;
  G4ThreeVectorList baseA(NSTEPS),baseB(NSTEPS);
  for (G4int k=0; k<NSTEPS; ++k)
  {
    baseA[k].set(sxmax*cosCur,symax*sinCur,-zcut);
    baseB[k].set(sxmin*cosCur,symin*sinCur, zcut);
    
    G4double sinTmp = sinCur;
    sinCur = sinCur*cosStep + cosCur*sinStep;
    cosCur = cosCur*cosStep - sinTmp*sinStep;
  }
 
  std::vector<const G4ThreeVectorList *> polygons(2);
  polygons[0] = &baseA;
  polygons[1] = &baseB;
  G4BoundingEnvelope benv(bmin,bmax,polygons);
  exist = benv.CalculateExtent(pAxis,pVoxelLimit,pTransform,pMin,pMax);
  return exist;
}

◆ Clone()

G4VSolid * G4EllipticalCone::Clone ( ) const

virtual

Reimplemented from G4VSolid.

Definition at line 809 of file G4EllipticalCone.cc.

{
  return new G4EllipticalCone(*this);
}

◆ CreatePolyhedron()

G4Polyhedron * G4EllipticalCone::CreatePolyhedron ( ) const

virtual

Reimplemented from G4VSolid.

Definition at line 973 of file G4EllipticalCone.cc.

{
  return new G4PolyhedronEllipticalCone(xSemiAxis, ySemiAxis, zheight, zTopCut);
}

Referenced by GetPolyhedron().

◆ DescribeYourselfTo()

void G4EllipticalCone::DescribeYourselfTo ( G4VGraphicsScene & scene ) const

virtual

Implements G4VSolid.

Definition at line 957 of file G4EllipticalCone.cc.

{
  scene.AddSolid(*this);
}

◆ DistanceToIn() [1/2]

G4double G4EllipticalCone::DistanceToIn ( const G4ThreeVector & p ) const

virtual

Implements G4VSolid.

Definition at line 595 of file G4EllipticalCone.cc.

{
  G4double hp = std::sqrt(p.x()*p.x()*invXX + p.y()*p.y()*invYY) + p.z();
  G4double ds = (hp - zheight)*cosAxisMin;
  G4double dz = std::abs(p.z()) - zTopCut;
  G4double dist = std::max(ds,dz);
  return (dist > 0) ? dist : 0.;
}

◆ DistanceToIn() [2/2]

G4double G4EllipticalCone::DistanceToIn	(	const G4ThreeVector &	p,
		const G4ThreeVector &	v
	)		const

virtual

Implements G4VSolid.

Definition at line 346 of file G4EllipticalCone.cc.

{
  G4double distMin = kInfinity;
 
  // code from EllipticalTube
 
  G4double sigz = p.z()+zTopCut;
 
  //
  // Check z = -dz planer surface
  //
 
  if (sigz < halfCarTol)
  {
    //
    // We are "behind" the shape in z, and so can
    // potentially hit the rear face. Correct direction?
    //
    if (v.z() <= 0)
    {
      //
      // As long as we are far enough away, we know we
      // can't intersect
      //
      if (sigz < 0) return kInfinity;
      
      //
      // Otherwise, we don't intersect unless we are
      // on the surface of the ellipse
      //
 
      if ( sqr(p.x()/( xSemiAxis - halfCarTol ))
         + sqr(p.y()/( ySemiAxis - halfCarTol )) <= sqr( zheight + zTopCut ) )
        return kInfinity;
 
    }
    else
    {
      //
      // How far?
      //
      G4double q = -sigz/v.z();
      
      //
      // Where does that place us?
      //
      G4double xi = p.x() + q*v.x(),
               yi = p.y() + q*v.y();
      
      //
      // Is this on the surface (within ellipse)?
      //
      if ( sqr(xi/xSemiAxis) + sqr(yi/ySemiAxis) <= sqr( zheight + zTopCut ) )
      {
        //
        // Yup. Return q, unless we are on the surface
        //
        return (sigz < -halfCarTol) ? q : 0;
      }
      else if (xi/(xSemiAxis*xSemiAxis)*v.x()
             + yi/(ySemiAxis*ySemiAxis)*v.y() >= 0)
      {
        //
        // Else, if we are traveling outwards, we know
        // we must miss
        //
        //        return kInfinity;
      }
    }
  }
 
  //
  // Check z = +dz planer surface
  //
  sigz = p.z() - zTopCut;
  
  if (sigz > -halfCarTol)
  {
    if (v.z() >= 0)
    {
 
      if (sigz > 0) return kInfinity;
 
      if ( sqr(p.x()/( xSemiAxis - halfCarTol ))
         + sqr(p.y()/( ySemiAxis - halfCarTol )) <= sqr( zheight-zTopCut ) )
        return kInfinity;
 
    }
    else {
      G4double q = -sigz/v.z();
 
      G4double xi = p.x() + q*v.x(),
               yi = p.y() + q*v.y();
 
      if ( sqr(xi/xSemiAxis) + sqr(yi/ySemiAxis) <= sqr( zheight - zTopCut ) )
      {
        return (sigz > -halfCarTol) ? q : 0;
      }
      else if (xi/(xSemiAxis*xSemiAxis)*v.x()
             + yi/(ySemiAxis*ySemiAxis)*v.y() >= 0)
      {
        //        return kInfinity;
      }
    }
  }
 
 
#if 0
 
  // check to see if Z plane is relevant
  //
  if (p.z() < -zTopCut - halfCarTol)
  {
    if (v.z() <= 0.0)
      return distMin; 
 
    G4double lambda = (-zTopCut - p.z())/v.z();
    
    if ( sqr((lambda*v.x()+p.x())/xSemiAxis) + 
         sqr((lambda*v.y()+p.y())/ySemiAxis) <=
         sqr(zTopCut + zheight + halfCarTol) ) 
    { 
      return distMin = std::fabs(lambda);    
    }
  }
 
  if (p.z() > zTopCut + halfCarTol) 
  {
    if (v.z() >= 0.0)
      { return distMin; }
 
    G4double lambda  = (zTopCut - p.z()) / v.z();
 
    if ( sqr((lambda*v.x() + p.x())/xSemiAxis) + 
         sqr((lambda*v.y() + p.y())/ySemiAxis) <=
         sqr(zheight - zTopCut + halfCarTol) )
      {
        return distMin = std::fabs(lambda);
      }
  }
  
  if (p.z() > zTopCut - halfCarTol
   && p.z() < zTopCut + halfCarTol )
  {
    if (v.z() > 0.) 
      { return kInfinity; }
 
    return distMin = 0.;
  }
  
  if (p.z() < -zTopCut + halfCarTol
   && p.z() > -zTopCut - halfCarTol)
  {
    if (v.z() < 0.)
      { return distMin = kInfinity; }
    
    return distMin = 0.;
  }
  
#endif
 
  // if we are here then it either intersects or grazes the curved surface 
  // or it does not intersect at all
  //
  G4double A = sqr(v.x()/xSemiAxis) + sqr(v.y()/ySemiAxis) - sqr(v.z());
  G4double B = 2*(v.x()*p.x()/sqr(xSemiAxis) + 
                  v.y()*p.y()/sqr(ySemiAxis) + v.z()*(zheight-p.z()));
  G4double C = sqr(p.x()/xSemiAxis) + sqr(p.y()/ySemiAxis) - 
               sqr(zheight - p.z());
 
  G4double discr = B*B - 4.*A*C;
   
  // if the discriminant is negative it never hits the curved object
  //
  if ( discr < -halfCarTol )
    { return distMin; }
  
  // case below is when it hits or grazes the surface
  //
  if ( (discr >= -halfCarTol ) && (discr < halfCarTol ) )
  {
    return distMin = std::fabs(-B/(2.*A)); 
  }
  
  G4double plus  = (-B+std::sqrt(discr))/(2.*A);
  G4double minus = (-B-std::sqrt(discr))/(2.*A);
 
  // Special case::Point on Surface, Check norm.dot(v)
 
  if ( ( std::fabs(plus) < halfCarTol )||( std::fabs(minus) < halfCarTol ) )
  {
    G4ThreeVector truenorm(p.x()/(xSemiAxis*xSemiAxis),
                           p.y()/(ySemiAxis*ySemiAxis),
                           -( p.z() - zheight ));
    if ( truenorm*v >= 0)  //  going outside the solid from surface
    {
      return kInfinity;
    }
    else
    {
      return 0;
    }
  }
 
  // G4double lambda = std::fabs(plus) < std::fabs(minus) ? plus : minus;  
  G4double lambda = 0;
 
  if ( minus > halfCarTol && minus < distMin ) 
  {
    lambda = minus ;
    // check normal vector   n * v < 0
    G4ThreeVector pin = p + lambda*v;
    if(std::fabs(pin.z())< zTopCut + halfCarTol)
    {
      G4ThreeVector truenorm(pin.x()/(xSemiAxis*xSemiAxis),
                             pin.y()/(ySemiAxis*ySemiAxis),
                             - ( pin.z() - zheight ));
      if ( truenorm*v < 0)
      {   // yes, going inside the solid
        distMin = lambda;
      }
    }
  }
  if ( plus > halfCarTol  && plus < distMin )
  {
    lambda = plus ;
    // check normal vector   n * v < 0
    G4ThreeVector pin = p + lambda*v;
    if(std::fabs(pin.z()) < zTopCut + halfCarTol)
    {
      G4ThreeVector truenorm(pin.x()/(xSemiAxis*xSemiAxis),
                             pin.y()/(ySemiAxis*ySemiAxis),
                             - ( pin.z() - zheight ) );
      if ( truenorm*v < 0)
      {   // yes, going inside the solid
        distMin = lambda;
      }
    }
  }
  if (distMin < halfCarTol) distMin=0.;
  return distMin ;
}

◆ DistanceToOut() [1/2]

G4double G4EllipticalCone::DistanceToOut ( const G4ThreeVector & p ) const

virtual

Implements G4VSolid.

Definition at line 771 of file G4EllipticalCone.cc.

{
#ifdef G4SPECSDEBUG
  if( Inside(p) == kOutside )
  {
     std::ostringstream message;
     G4long oldprc = message.precision(16);
     message << "Point p is outside (!?) of solid: " << GetName() << "\n"
             << "Position:\n"
             << "   p.x() = "  << p.x()/mm << " mm\n"
             << "   p.y() = "  << p.y()/mm << " mm\n"
             << "   p.z() = "  << p.z()/mm << " mm";
     message.precision(oldprc) ;
     G4Exception("G4Ellipsoid::DistanceToOut(p)", "GeomSolids1002",
                 JustWarning, message);
     DumpInfo();
  }
#endif
  G4double hp = std::sqrt(p.x()*p.x()*invXX + p.y()*p.y()*invYY) + p.z();
  G4double ds = (zheight - hp)*cosAxisMin;
  G4double dz = zTopCut - std::abs(p.z());
  G4double dist = std::min(ds,dz);
  return (dist > 0) ? dist : 0.;
}

◆ DistanceToOut() [2/2]

G4double G4EllipticalCone::DistanceToOut	(	const G4ThreeVector &	p,
		const G4ThreeVector &	v,
		const G4bool	calcNorm = `false`,
		G4bool *	validNorm = `nullptr`,
		G4ThreeVector *	n = `nullptr`
	)		const

virtual

Implements G4VSolid.

Definition at line 609 of file G4EllipticalCone.cc.

{
  G4double distMin, lambda;
  enum surface_e {kPlaneSurf, kCurvedSurf, kNoSurf} surface;
  
  distMin = kInfinity;
  surface = kNoSurf;
 
  if (v.z() < 0.0)
  {
    lambda = (-p.z() - zTopCut)/v.z();
 
    if ( (sqr((p.x() + lambda*v.x())/xSemiAxis) + 
          sqr((p.y() + lambda*v.y())/ySemiAxis)) < 
          sqr(zheight + zTopCut + halfCarTol) )
    {
      distMin = std::fabs(lambda);
 
      if (!calcNorm) { return distMin; }
    } 
    distMin = std::fabs(lambda);
    surface = kPlaneSurf;
  }
 
  if (v.z() > 0.0)
  {
    lambda = (zTopCut - p.z()) / v.z();
 
    if ( (sqr((p.x() + lambda*v.x())/xSemiAxis)
        + sqr((p.y() + lambda*v.y())/ySemiAxis) )
       < (sqr(zheight - zTopCut + halfCarTol)) )
    {
      distMin = std::fabs(lambda);
      if (!calcNorm) { return distMin; }
    }
    distMin = std::fabs(lambda);
    surface = kPlaneSurf;
  }
  
  // if we are here then it either intersects or grazes the 
  // curved surface...
  //
  G4double A = sqr(v.x()/xSemiAxis) + sqr(v.y()/ySemiAxis) - sqr(v.z());
  G4double B = 2.*(v.x()*p.x()/sqr(xSemiAxis) +  
                   v.y()*p.y()/sqr(ySemiAxis) + v.z()*(zheight-p.z()));
  G4double C = sqr(p.x()/xSemiAxis) + sqr(p.y()/ySemiAxis)
             - sqr(zheight - p.z());
 
  G4double discr = B*B - 4.*A*C;
  
  if ( discr >= - halfCarTol && discr < halfCarTol )
  { 
    if(!calcNorm) { return distMin = std::fabs(-B/(2.*A)); }
  }
 
  else if ( discr > halfCarTol )
  {
    G4double plus  = (-B+std::sqrt(discr))/(2.*A);
    G4double minus = (-B-std::sqrt(discr))/(2.*A);
 
    if ( plus > halfCarTol && minus > halfCarTol )
    {
      // take the shorter distance
      //
      lambda   = std::fabs(plus) < std::fabs(minus) ? plus : minus;
    }
    else
    {
      // at least one solution is close to zero or negative
      // so, take small positive solution or zero 
      //
      lambda   = plus > -halfCarTol ? plus : 0;
    }
 
    if ( std::fabs(lambda) < distMin )
    {
      if( std::fabs(lambda) > halfCarTol)
      {
        distMin  = std::fabs(lambda);
        surface  = kCurvedSurf;
      }
      else  // Point is On the Surface, Check Normal
      {
        G4ThreeVector truenorm(p.x()/(xSemiAxis*xSemiAxis),
                               p.y()/(ySemiAxis*ySemiAxis),
                               -( p.z() - zheight ));
        if( truenorm.dot(v) > 0 )
        {
          distMin  = 0.0;
          surface  = kCurvedSurf;
        }
      } 
    }
  }
 
  // set normal if requested
  //
  if (calcNorm)
  {
    if (surface == kNoSurf)
    {
      *validNorm = false;
    }
    else
    {
      *validNorm = true;
      switch (surface)
      {
        case kPlaneSurf:
        {
          *n = G4ThreeVector(0.,0.,(v.z() > 0.0 ? 1. : -1.));
        }
        break;
 
        case kCurvedSurf:
        {
          G4ThreeVector pexit = p + distMin*v;
          G4ThreeVector truenorm( pexit.x()/(xSemiAxis*xSemiAxis),
                                  pexit.y()/(ySemiAxis*ySemiAxis),
                                  -( pexit.z() - zheight ) );
          truenorm /= truenorm.mag();
          *n= truenorm;
        } 
        break;
 
        default:            // Should never reach this case ...
          DumpInfo();
          std::ostringstream message;
          G4long oldprc = message.precision(16);
          message << "Undefined side for valid surface normal to solid."
                  << G4endl
                  << "Position:"  << G4endl
                  << "   p.x() = "   << p.x()/mm << " mm" << G4endl
                  << "   p.y() = "   << p.y()/mm << " mm" << G4endl
                  << "   p.z() = "   << p.z()/mm << " mm" << G4endl
                  << "Direction:" << G4endl
                  << "   v.x() = "   << v.x() << G4endl
                  << "   v.y() = "   << v.y() << G4endl
                  << "   v.z() = "   << v.z() << G4endl
                  << "Proposed distance :" << G4endl
                  << "   distMin = "    << distMin/mm << " mm";
          message.precision(oldprc);
          G4Exception("G4EllipticalCone::DistanceToOut(p,v,..)",
                      "GeomSolids1002", JustWarning, message);
          break;
      }
    }
  }
 
  if (distMin < halfCarTol) { distMin=0; }
 
  return distMin;
}

◆ GetCubicVolume()

G4double G4EllipticalCone::GetCubicVolume ( )

virtual

Reimplemented from G4VSolid.

Definition at line 920 of file G4EllipticalCone.cc.

{
  if (fCubicVolume == 0.0)
  {
    G4double x0 = xSemiAxis*zheight; // x semi axis at z=0
    G4double y0 = ySemiAxis*zheight; // y semi axis at z=0
    G4double v0 = CLHEP::pi*x0*y0*zheight/3.;
    G4double kmin = (zTopCut >= zheight ) ? 0. : (zheight - zTopCut)/zheight;
    G4double kmax = (zTopCut >= zheight ) ? 2. : (zheight + zTopCut)/zheight;
    fCubicVolume = (kmax - kmin)*(kmax*kmax + kmax*kmin + kmin*kmin)*v0;
  }
  return fCubicVolume;
}

◆ GetEntityType()

G4GeometryType G4EllipticalCone::GetEntityType ( ) const

virtual

Implements G4VSolid.

Definition at line 800 of file G4EllipticalCone.cc.

{
  return G4String("G4EllipticalCone");
}

◆ GetExtent()

G4VisExtent G4EllipticalCone::GetExtent ( ) const

virtual

Reimplemented from G4VSolid.

Definition at line 962 of file G4EllipticalCone.cc.

{
  // Define the sides of the box into which the solid instance would fit.
  //
  G4ThreeVector pmin,pmax;
  BoundingLimits(pmin,pmax);
  return G4VisExtent(pmin.x(),pmax.x(),
                     pmin.y(),pmax.y(),
                     pmin.z(),pmax.z());
}

◆ GetPointOnSurface()

G4ThreeVector G4EllipticalCone::GetPointOnSurface ( ) const

virtual

Reimplemented from G4VSolid.

Definition at line 841 of file G4EllipticalCone.cc.

{
  G4double x0 = xSemiAxis*zheight; // x semi axis at z=0
  G4double y0 = ySemiAxis*zheight; // y semi axis at z=0
  G4double s0 = G4GeomTools::EllipticConeLateralArea(x0,y0,zheight);
  G4double kmin = (zTopCut >= zheight ) ? 0. : (zheight - zTopCut)/zheight;
  G4double kmax = (zTopCut >= zheight ) ? 2. : (zheight + zTopCut)/zheight;
 
  // Set areas (base at -Z, side surface, base at +Z)
  //
  G4double szmin =  pi*x0*y0*kmax*kmax;
  G4double szmax =  pi*x0*y0*kmin*kmin;
  G4double sside =  s0*(kmax*kmax - kmin*kmin);
  G4double ssurf[3] = { szmin, sside, szmax };
  for (auto i=1; i<3; ++i) { ssurf[i] += ssurf[i-1]; }
 
  // Select surface
  //
  G4double select = ssurf[2]*G4UniformRand();
  G4int k = 2;
  if (select <= ssurf[1]) k = 1;
  if (select <= ssurf[0]) k = 0;
 
  // Pick random point on selected surface
  //
  G4ThreeVector p;
  switch(k)
  {
    case 0: // base at -Z, uniform distribution, rejection sampling
    {
      G4double zh = zheight + zTopCut;
      G4TwoVector rho = G4RandomPointInEllipse(zh*xSemiAxis,zh*ySemiAxis);
      p.set(rho.x(),rho.y(),-zTopCut);
      break;
    }
    case 1: // side surface, uniform distribution, rejection sampling
    {
      G4double zh = G4RandomRadiusInRing(zheight-zTopCut, zheight+zTopCut);
      G4double a = x0;
      G4double b = y0;
 
      G4double hh = zheight*zheight;
      G4double aa = a*a;
      G4double bb = b*b;
      G4double R  = std::max(a,b);
      G4double mu_max = R*std::sqrt(hh + R*R);
 
      G4double x,y;
      for (auto i=0; i<1000; ++i)
      {
    G4double phi = CLHEP::twopi*G4UniformRand();
        x = std::cos(phi);
        y = std::sin(phi);
        G4double xx = x*x;
        G4double yy = y*y;
        G4double E = hh + aa*xx + bb*yy;
        G4double F = (aa-bb)*x*y;
        G4double G = aa*yy + bb*xx;
        G4double mu = std::sqrt(E*G - F*F);
        if (mu_max*G4UniformRand() <= mu) break;
      }
      p.set(zh*xSemiAxis*x,zh*ySemiAxis*y,zheight-zh);
      break;
    }
    case 2: // base at +Z, uniform distribution, rejection sampling
    {
      G4double zh = zheight - zTopCut;
      G4TwoVector rho = G4RandomPointInEllipse(zh*xSemiAxis,zh*ySemiAxis);
      p.set(rho.x(),rho.y(),zTopCut);
      break;
    }
  }
  return p;
}

◆ GetPolyhedron()

G4Polyhedron * G4EllipticalCone::GetPolyhedron ( ) const

virtual

Reimplemented from G4VSolid.

Definition at line 978 of file G4EllipticalCone.cc.

{
  if ( (fpPolyhedron == nullptr)
    || fRebuildPolyhedron
    || (fpPolyhedron->GetNumberOfRotationStepsAtTimeOfCreation() !=
        fpPolyhedron->GetNumberOfRotationSteps()) )
    {
      G4AutoLock l(&polyhedronMutex);
      delete fpPolyhedron;
      fpPolyhedron = CreatePolyhedron();
      fRebuildPolyhedron = false;
      l.unlock();
    }
  return fpPolyhedron;
}

◆ GetSemiAxisMax()

G4double G4EllipticalCone::GetSemiAxisMax ( ) const

inline

◆ GetSemiAxisMin()

G4double G4EllipticalCone::GetSemiAxisMin ( ) const

inline

◆ GetSemiAxisX()

G4double G4EllipticalCone::GetSemiAxisX ( ) const

inline

Referenced by BoundingLimits(), CalculateExtent(), G4GDMLWriteSolids::ElconeWrite(), and G4tgbGeometryDumper::GetSolidParams().

◆ GetSemiAxisY()

G4double G4EllipticalCone::GetSemiAxisY ( ) const

inline

Referenced by BoundingLimits(), CalculateExtent(), G4GDMLWriteSolids::ElconeWrite(), and G4tgbGeometryDumper::GetSolidParams().

◆ GetSurfaceArea()

G4double G4EllipticalCone::GetSurfaceArea ( )

virtual

Reimplemented from G4VSolid.

Definition at line 938 of file G4EllipticalCone.cc.

{
  if (fSurfaceArea == 0.0)
  {
    G4double x0 = xSemiAxis*zheight; // x semi axis at z=0
    G4double y0 = ySemiAxis*zheight; // y semi axis at z=0
    G4double s0 = G4GeomTools::EllipticConeLateralArea(x0,y0,zheight);
    G4double kmin = (zTopCut >= zheight ) ? 0. : (zheight - zTopCut)/zheight;
    G4double kmax = (zTopCut >= zheight ) ? 2. : (zheight + zTopCut)/zheight;
    fSurfaceArea = (kmax - kmin)*(kmax + kmin)*s0
                 + CLHEP::pi*x0*y0*(kmin*kmin + kmax*kmax);
  }
  return fSurfaceArea;
}

◆ GetZMax()

G4double G4EllipticalCone::GetZMax ( ) const

inline

Referenced by BoundingLimits(), CalculateExtent(), G4GDMLWriteSolids::ElconeWrite(), and G4tgbGeometryDumper::GetSolidParams().

◆ GetZTopCut()

G4double G4EllipticalCone::GetZTopCut ( ) const

inline

Referenced by BoundingLimits(), G4GDMLWriteSolids::ElconeWrite(), and G4tgbGeometryDumper::GetSolidParams().

◆ Inside()

EInside G4EllipticalCone::Inside ( const G4ThreeVector & p ) const

virtual

Implements G4VSolid.

Definition at line 262 of file G4EllipticalCone.cc.

{
  G4double hp = std::sqrt(p.x()*p.x()*invXX + p.y()*p.y()*invYY) + p.z();
  G4double ds = (hp - zheight)*cosAxisMin;
  G4double dz = std::abs(p.z()) - zTopCut;
  G4double dist = std::max(ds,dz);
 
  if (dist > halfCarTol) return kOutside;
  return (dist > -halfCarTol) ? kSurface : kInside;
}

Referenced by DistanceToOut().

◆ operator=()

G4EllipticalCone & G4EllipticalCone::operator= ( const G4EllipticalCone & rhs )

Definition at line 144 of file G4EllipticalCone.cc.

{
   // Check assignment to self
   //
   if (this == &rhs)  { return *this; }
 
   // Copy base class data
   //
   G4VSolid::operator=(rhs);
 
   // Copy data
   //
   halfCarTol = rhs.halfCarTol;
   fCubicVolume = rhs.fCubicVolume; fSurfaceArea = rhs.fSurfaceArea;
   xSemiAxis = rhs.xSemiAxis; ySemiAxis = rhs.ySemiAxis;
   zheight = rhs.zheight; zTopCut = rhs.zTopCut;
   cosAxisMin = rhs.cosAxisMin; invXX = rhs.invXX; invYY = rhs.invYY;
 
   fRebuildPolyhedron = false;
   delete fpPolyhedron; fpPolyhedron = nullptr;
 
   return *this;
}

◆ SetSemiAxis()

void G4EllipticalCone::SetSemiAxis	(	G4double	x,
		G4double	y,
		G4double	z
	)

inline

Referenced by G4EllipticalCone().

◆ SetZCut()

void G4EllipticalCone::SetZCut ( G4double newzTopCut )

inline

Referenced by G4EllipticalCone().

◆ StreamInfo()

std::ostream & G4EllipticalCone::StreamInfo ( std::ostream & os ) const

virtual

Implements G4VSolid.

Definition at line 818 of file G4EllipticalCone.cc.

{
  G4long oldprc = os.precision(16);
  os << "-----------------------------------------------------------\n"
     << "    *** Dump for solid - " << GetName() << " ***\n"
     << "    ===================================================\n"
     << " Solid type: G4EllipticalCone\n"
     << " Parameters: \n"
 
     << "    semi-axis x: " << xSemiAxis/mm << " mm \n"
     << "    semi-axis y: " << ySemiAxis/mm << " mm \n"
     << "    height    z: " << zheight/mm << " mm \n"
     << "    half length in  z: " << zTopCut/mm << " mm \n"
     << "-----------------------------------------------------------\n";
  os.precision(oldprc);
 
  return os;
}

◆ SurfaceNormal()

G4ThreeVector G4EllipticalCone::SurfaceNormal ( const G4ThreeVector & p ) const

virtual

Implements G4VSolid.

Definition at line 277 of file G4EllipticalCone.cc.

{
  G4ThreeVector norm(0,0,0);
  G4int nsurf = 0;  // number of surfaces where p is placed
 
  G4double hp = std::sqrt(p.x()*p.x()*invXX + p.y()*p.y()*invYY) + p.z();
  G4double ds = (hp - zheight)*cosAxisMin;
  if (std::abs(ds) <= halfCarTol)
  {
    norm = G4ThreeVector(p.x()*invXX, p.y()*invYY, hp - p.z());
    G4double mag = norm.mag();
    if (mag == 0) return G4ThreeVector(0,0,1); // apex
    norm *= (1/mag);
    ++nsurf;
  }
  G4double dz = std::abs(p.z()) - zTopCut;
  if (std::abs(dz) <= halfCarTol)
  {
    norm += G4ThreeVector(0., 0.,(p.z() < 0) ? -1. : 1.);
    ++nsurf;
  }
 
  if      (nsurf == 1) return norm;
  else if (nsurf >  1) return norm.unit(); // elliptic edge
  else
  {
    // Point is not on the surface
    //
#ifdef G4CSGDEBUG
    std::ostringstream message;
    G4long oldprc = message.precision(16);
    message << "Point p is not on surface (!?) of solid: "
            << GetName() << G4endl;
    message << "Position:\n";
    message << "   p.x() = " << p.x()/mm << " mm\n";
    message << "   p.y() = " << p.y()/mm << " mm\n";
    message << "   p.z() = " << p.z()/mm << " mm";
    G4cout.precision(oldprc);
    G4Exception("G4EllipticalCone::SurfaceNormal(p)", "GeomSolids1002",
                JustWarning, message );
    DumpInfo();
#endif
    return ApproxSurfaceNormal(p);
  }
}

Member Data Documentation

◆ fpPolyhedron

G4Polyhedron* G4EllipticalCone::fpPolyhedron = nullptr

mutableprotected

Definition at line 168 of file G4EllipticalCone.hh.

Referenced by GetPolyhedron(), operator=(), and ~G4EllipticalCone().

◆ fRebuildPolyhedron

G4bool G4EllipticalCone::fRebuildPolyhedron = false

mutableprotected

Definition at line 167 of file G4EllipticalCone.hh.

Referenced by GetPolyhedron(), and operator=().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ G4EllipticalCone() [1/3]

◆ ~G4EllipticalCone()

◆ G4EllipticalCone() [2/3]

◆ G4EllipticalCone() [3/3]

Member Function Documentation

◆ BoundingLimits()

◆ CalculateExtent()

◆ Clone()

◆ CreatePolyhedron()

◆ DescribeYourselfTo()

◆ DistanceToIn() [1/2]

◆ DistanceToIn() [2/2]

◆ DistanceToOut() [1/2]

◆ DistanceToOut() [2/2]

◆ GetCubicVolume()

◆ GetEntityType()

◆ GetExtent()

◆ GetPointOnSurface()

◆ GetPolyhedron()

◆ GetSemiAxisMax()

◆ GetSemiAxisMin()

◆ GetSemiAxisX()

◆ GetSemiAxisY()

◆ GetSurfaceArea()

◆ GetZMax()

◆ GetZTopCut()

◆ Inside()

◆ operator=()

◆ SetSemiAxis()

◆ SetZCut()

◆ StreamInfo()

◆ SurfaceNormal()

Member Data Documentation

◆ fpPolyhedron

◆ fRebuildPolyhedron