gzlib.c File Reference

#include "gzguts.h"

Go to the source code of this file.

Macros
#define	LSEEK   lseek

Functions
local void gz_reset	OF ((gz_statep))
local gzFile gz_open	OF ((const void *, int, const char *))
local void	gz_reset (gz_statep state)
local gzFile	gz_open (void *path, int fd, const char *mode) const
gzFile ZEXPORT	gzopen (char *path, const char *mode) const
gzFile ZEXPORT	gzopen64 (char *path, const char *mode) const
gzFile ZEXPORT	gzdopen (int fd, const char *mode)
int ZEXPORT	gzbuffer (gzFile file, unsigned size)
int ZEXPORT	gzrewind (gzFile file)
z_off64_t ZEXPORT	gzseek64 (gzFile file, z_off64_t offset, int whence)
z_off_t ZEXPORT	gzseek (gzFile file, z_off_t offset, int whence)
z_off64_t ZEXPORT	gztell64 (gzFile file)
z_off_t ZEXPORT	gztell (gzFile file)
z_off64_t ZEXPORT	gzoffset64 (gzFile file)
z_off_t ZEXPORT	gzoffset (gzFile file)
int ZEXPORT	gzeof (gzFile file)
const char *ZEXPORT	gzerror (gzFile file, int *errnum)
void ZEXPORT	gzclearerr (gzFile file)
void ZLIB_INTERNAL	gz_error (gz_statep state, int err, const char *msg)
unsigned ZLIB_INTERNAL	gz_intmax ()

Macro Definition Documentation

LSEEK

#define LSEEK   lseek

Definition at line 14 of file gzlib.c.

Referenced by gz_open(), gzoffset64(), gzrewind(), and gzseek64().

Function Documentation

gz_error()

void ZLIB_INTERNAL gz_error	(	gz_statep	state,
		int	err,
		const char *	msg )

Definition at line 581 of file gzlib.c.

{
    /* free previously allocated message and clear */
    if (state->msg != NULL) {
        if (state->err != Z_MEM_ERROR)
            free(state->msg);
        state->msg = NULL;
    }
 
    /* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */
    if (err != Z_OK && err != Z_BUF_ERROR)
        state->x.have = 0;
 
    /* set error code, and if no message, then done */
    state->err = err;
    if (msg == NULL)
        return;
 
    /* for an out of memory error, return literal string when requested */
    if (err == Z_MEM_ERROR)
        return;
 
    /* construct error message with path */
    if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) ==
            NULL) {
        state->err = Z_MEM_ERROR;
        return;
    }
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
    (void)snprintf(state->msg, strlen(state->path) + strlen(msg) + 3,
                   "%s%s%s", state->path, ": ", msg);
#else
    strcpy(state->msg, state->path);
    strcat(state->msg, ": ");
    strcat(state->msg, msg);
#endif
}

Referenced by gz_comp(), gz_decomp(), gz_init(), gz_load(), gz_look(), gz_reset(), gzclearerr(), gzclose_r(), gzclose_w(), gzfread(), gzfwrite(), gzputs(), gzread(), gzseek64(), gzungetc(), and gzwrite().

gz_intmax()

unsigned ZLIB_INTERNAL gz_intmax

(

)

Definition at line 627 of file gzlib.c.

{
    unsigned p, q;
 
    p = 1;
    do {
        q = p;
        p <<= 1;
        p++;
    } while (p > q);
    return q >> 1;
}

gz_open()

local gzFile gz_open	(	void *	path,
		int	fd,
		const char *	mode ) const

Definition at line 93 of file gzlib.c.

{
    gz_statep state;
    z_size_t len;
    int oflag;
#ifdef O_CLOEXEC
    int cloexec = 0;
#endif
#ifdef O_EXCL
    int exclusive = 0;
#endif
 
    /* check input */
    if (path == NULL)
        return NULL;
 
    /* allocate gzFile structure to return */
    state = (gz_statep)malloc(sizeof(gz_state));
    if (state == NULL)
        return NULL;
    state->size = 0;            /* no buffers allocated yet */
    state->want = GZBUFSIZE;    /* requested buffer size */
    state->msg = NULL;          /* no error message yet */
 
    /* interpret mode */
    state->mode = GZ_NONE;
    state->level = Z_DEFAULT_COMPRESSION;
    state->strategy = Z_DEFAULT_STRATEGY;
    state->direct = 0;
    while (*mode) {
        if (*mode >= '0' && *mode <= '9')
            state->level = *mode - '0';
        else
            switch (*mode) {
            case 'r':
                state->mode = GZ_READ;
                break;
#ifndef NO_GZCOMPRESS
            case 'w':
                state->mode = GZ_WRITE;
                break;
            case 'a':
                state->mode = GZ_APPEND;
                break;
#endif
            case '+':       /* can't read and write at the same time */
                free(state);
                return NULL;
            case 'b':       /* ignore -- will request binary anyway */
                break;
#ifdef O_CLOEXEC
            case 'e':
                cloexec = 1;
                break;
#endif
#ifdef O_EXCL
            case 'x':
                exclusive = 1;
                break;
#endif
            case 'f':
                state->strategy = Z_FILTERED;
                break;
            case 'h':
                state->strategy = Z_HUFFMAN_ONLY;
                break;
            case 'R':
                state->strategy = Z_RLE;
                break;
            case 'F':
                state->strategy = Z_FIXED;
                break;
            case 'T':
                state->direct = 1;
                break;
            default:        /* could consider as an error, but just ignore */
                ;
            }
        mode++;
    }
 
    /* must provide an "r", "w", or "a" */
    if (state->mode == GZ_NONE) {
        free(state);
        return NULL;
    }
 
    /* can't force transparent read */
    if (state->mode == GZ_READ) {
        if (state->direct) {
            free(state);
            return NULL;
        }
        state->direct = 1;      /* for empty file */
    }
 
    /* save the path name for error messages */
#ifdef WIDECHAR
    if (fd == -2) {
        len = wcstombs(NULL, path, 0);
        if (len == (z_size_t)-1)
            len = 0;
    }
    else
#endif
        len = strlen((const char *)path);
    state->path = (char *)malloc(len + 1);
    if (state->path == NULL) {
        free(state);
        return NULL;
    }
#ifdef WIDECHAR
    if (fd == -2)
        if (len)
            wcstombs(state->path, path, len + 1);
        else
            *(state->path) = 0;
    else
#endif
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
        (void)snprintf(state->path, len + 1, "%s", (const char *)path);
#else
        strcpy(state->path, path);
#endif
 
    /* compute the flags for open() */
    oflag =
#ifdef O_LARGEFILE
        O_LARGEFILE |
#endif
#ifdef O_BINARY
        O_BINARY |
#endif
#ifdef O_CLOEXEC
        (cloexec ? O_CLOEXEC : 0) |
#endif
        (state->mode == GZ_READ ?
         O_RDONLY :
         (O_WRONLY | O_CREAT |
#ifdef O_EXCL
          (exclusive ? O_EXCL : 0) |
#endif
          (state->mode == GZ_WRITE ?
           O_TRUNC :
           O_APPEND)));
 
    /* open the file with the appropriate flags (or just use fd) */
    state->fd = fd > -1 ? fd : (
#ifdef WIDECHAR
        fd == -2 ? _wopen(path, oflag, 0666) :
#endif
        open((const char *)path, oflag, 0666));
    if (state->fd == -1) {
        free(state->path);
        free(state);
        return NULL;
    }
    if (state->mode == GZ_APPEND) {
        LSEEK(state->fd, 0, SEEK_END);  /* so gzoffset() is correct */
        state->mode = GZ_WRITE;         /* simplify later checks */
    }
 
    /* save the current position for rewinding (only if reading) */
    if (state->mode == GZ_READ) {
        state->start = LSEEK(state->fd, 0, SEEK_CUR);
        if (state->start == -1) state->start = 0;
    }
 
    /* initialize stream */
    gz_reset(state);
 
    /* return stream */
    return (gzFile)state;
}

Referenced by gzdopen(), gzopen(), and gzopen64().

gz_reset()

local void gz_reset

(

gz_statep

state

)

Definition at line 75 of file gzlib.c.

{
    state->x.have = 0;              /* no output data available */
    if (state->mode == GZ_READ) {   /* for reading ... */
        state->eof = 0;             /* not at end of file */
        state->past = 0;            /* have not read past end yet */
        state->how = LOOK;          /* look for gzip header */
    }
    else                            /* for writing ... */
        state->reset = 0;           /* no deflateReset pending */
    state->seek = 0;                /* no seek request pending */
    gz_error(state, Z_OK, NULL);    /* clear error */
    state->x.pos = 0;               /* no uncompressed data yet */
    state->strm.avail_in = 0;       /* no input data yet */
}

Referenced by gz_open(), and gzrewind().

gzbuffer()

int ZEXPORT gzbuffer	(	gzFile	file,
		unsigned	size )

Definition at line 318 of file gzlib.c.

{
    gz_statep state;
 
    /* get internal structure and check integrity */
    if (file == NULL)
        return -1;
    state = (gz_statep)file;
    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
        return -1;
 
    /* make sure we haven't already allocated memory */
    if (state->size != 0)
        return -1;
 
    /* check and set requested size */
    if ((size << 1) < size)
        return -1;              /* need to be able to double it */
    if (size < 2)
        size = 2;               /* need two bytes to check magic header */
    state->want = size;
    return 0;
}

gzclearerr()

void ZEXPORT gzclearerr

(

gzFile

file

)

Definition at line 555 of file gzlib.c.

{
    gz_statep state;
 
    /* get internal structure and check integrity */
    if (file == NULL)
        return;
    state = (gz_statep)file;
    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
        return;
 
    /* clear error and end-of-file */
    if (state->mode == GZ_READ) {
        state->eof = 0;
        state->past = 0;
    }
    gz_error(state, Z_OK, NULL);
}

gzdopen()

gzFile ZEXPORT gzdopen	(	int	fd,
		const char *	mode )

Definition at line 288 of file gzlib.c.

{
    char *path;         /* identifier for error messages */
    gzFile gz;
 
    if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL)
        return NULL;
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
    (void)snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd);
#else
    sprintf(path, "<fd:%d>", fd);   /* for debugging */
#endif
    gz = gz_open(path, fd, mode);
    free(path);
    return gz;
}

gzeof()

int ZEXPORT gzeof

(

gzFile

file

)

Definition at line 517 of file gzlib.c.

{
    gz_statep state;
 
    /* get internal structure and check integrity */
    if (file == NULL)
        return 0;
    state = (gz_statep)file;
    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
        return 0;
 
    /* return end-of-file state */
    return state->mode == GZ_READ ? state->past : 0;
}

gzerror()

const char *ZEXPORT gzerror	(	gzFile	file,
		int *	errnum )

Definition at line 534 of file gzlib.c.

{
    gz_statep state;
 
    /* get internal structure and check integrity */
    if (file == NULL)
        return NULL;
    state = (gz_statep)file;
    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
        return NULL;
 
    /* return error information */
    if (errnum != NULL)
        *errnum = state->err;
    return state->err == Z_MEM_ERROR ? "out of memory" :
                                       (state->msg == NULL ? "" : state->msg);
}

gzoffset()

z_off_t ZEXPORT gzoffset

(

gzFile

file

)

Definition at line 507 of file gzlib.c.

{
    z_off64_t ret;
 
    ret = gzoffset64(file);
    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
}

gzoffset64()

z_off64_t ZEXPORT gzoffset64

(

gzFile

file

)

Definition at line 484 of file gzlib.c.

{
    z_off64_t offset;
    gz_statep state;
 
    /* get internal structure and check integrity */
    if (file == NULL)
        return -1;
    state = (gz_statep)file;
    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
        return -1;
 
    /* compute and return effective offset in file */
    offset = LSEEK(state->fd, 0, SEEK_CUR);
    if (offset == -1)
        return -1;
    if (state->mode == GZ_READ)             /* reading */
        offset -= state->strm.avail_in;     /* don't count buffered input */
    return offset;
}

Referenced by gzoffset().

gzopen()

gzFile ZEXPORT gzopen	(	char *	path,
		const char *	mode ) const

Definition at line 272 of file gzlib.c.

{
    return gz_open(path, -1, mode);
}

gzopen64()

gzFile ZEXPORT gzopen64	(	char *	path,
		const char *	mode ) const

Definition at line 280 of file gzlib.c.

{
    return gz_open(path, -1, mode);
}

gzrewind()

int ZEXPORT gzrewind

(

gzFile

file

)

Definition at line 345 of file gzlib.c.

{
    gz_statep state;
 
    /* get internal structure */
    if (file == NULL)
        return -1;
    state = (gz_statep)file;
 
    /* check that we're reading and that there's no error */
    if (state->mode != GZ_READ ||
            (state->err != Z_OK && state->err != Z_BUF_ERROR))
        return -1;
 
    /* back up and start over */
    if (LSEEK(state->fd, state->start, SEEK_SET) == -1)
        return -1;
    gz_reset(state);
    return 0;
}

Referenced by gzseek64().

gzseek()

z_off_t ZEXPORT gzseek	(	gzFile	file,
		z_off_t	offset,
		int	whence )

Definition at line 445 of file gzlib.c.

{
    z_off64_t ret;
 
    ret = gzseek64(file, (z_off64_t)offset, whence);
    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
}

gzseek64()

z_off64_t ZEXPORT gzseek64	(	gzFile	file,
		z_off64_t	offset,
		int	whence )

Definition at line 368 of file gzlib.c.

{
    unsigned n;
    z_off64_t ret;
    gz_statep state;
 
    /* get internal structure and check integrity */
    if (file == NULL)
        return -1;
    state = (gz_statep)file;
    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
        return -1;
 
    /* check that there's no error */
    if (state->err != Z_OK && state->err != Z_BUF_ERROR)
        return -1;
 
    /* can only seek from start or relative to current position */
    if (whence != SEEK_SET && whence != SEEK_CUR)
        return -1;
 
    /* normalize offset to a SEEK_CUR specification */
    if (whence == SEEK_SET)
        offset -= state->x.pos;
    else if (state->seek)
        offset += state->skip;
    state->seek = 0;
 
    /* if within raw area while reading, just go there */
    if (state->mode == GZ_READ && state->how == COPY &&
            state->x.pos + offset >= 0) {
        ret = LSEEK(state->fd, offset - (z_off64_t)state->x.have, SEEK_CUR);
        if (ret == -1)
            return -1;
        state->x.have = 0;
        state->eof = 0;
        state->past = 0;
        state->seek = 0;
        gz_error(state, Z_OK, NULL);
        state->strm.avail_in = 0;
        state->x.pos += offset;
        return state->x.pos;
    }
 
    /* calculate skip amount, rewinding if needed for back seek when reading */
    if (offset < 0) {
        if (state->mode != GZ_READ)         /* writing -- can't go backwards */
            return -1;
        offset += state->x.pos;
        if (offset < 0)                     /* before start of file! */
            return -1;
        if (gzrewind(file) == -1)           /* rewind, then skip to offset */
            return -1;
    }
 
    /* if reading, skip what's in output buffer (one less gzgetc() check) */
    if (state->mode == GZ_READ) {
        n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ?
            (unsigned)offset : state->x.have;
        state->x.have -= n;
        state->x.next += n;
        state->x.pos += n;
        offset -= n;
    }
 
    /* request skip (if not zero) */
    if (offset) {
        state->seek = 1;
        state->skip = offset;
    }
    return state->x.pos + offset;
}

Referenced by gzseek().

gztell()

z_off_t ZEXPORT gztell

(

gzFile

file

)

Definition at line 474 of file gzlib.c.

{
    z_off64_t ret;
 
    ret = gztell64(file);
    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
}

gztell64()

z_off64_t ZEXPORT gztell64

(

gzFile

file

)

Definition at line 457 of file gzlib.c.

{
    gz_statep state;
 
    /* get internal structure and check integrity */
    if (file == NULL)
        return -1;
    state = (gz_statep)file;
    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
        return -1;
 
    /* return position */
    return state->x.pos + (state->seek ? state->skip : 0);
}

Referenced by gztell().

OF() [1/2]

local gzFile gz_open OF

(

(const void *, int, const char *)

)

OF() [2/2]

local void gz_reset OF

(

(gz_statep)

)