G4SubtractionSolid.cc

Go to the documentation of this file.

//
// ********************************************************************
// * License and Disclaimer                                           *
// *                                                                  *
// * The  Geant4 software  is  copyright of the Copyright Holders  of *
// * the Geant4 Collaboration.  It is provided  under  the terms  and *
// * conditions of the Geant4 Software License,  included in the file *
// * LICENSE and available at  http://cern.ch/geant4/license .  These *
// * include a list of copyright holders.                             *
// *                                                                  *
// * Neither the authors of this software system, nor their employing *
// * institutes,nor the agencies providing financial support for this *
// * work  make  any representation or  warranty, express or implied, *
// * regarding  this  software system or assume any liability for its *
// * use.  Please see the license in the file  LICENSE  and URL above *
// * for the full disclaimer and the limitation of liability.         *
// *                                                                  *
// * This  code  implementation is the result of  the  scientific and *
// * technical work of the GEANT4 collaboration.                      *
// * By using,  copying,  modifying or  distributing the software (or *
// * any work based  on the software)  you  agree  to acknowledge its *
// * use  in  resulting  scientific  publications,  and indicate your *
// * acceptance of all terms of the Geant4 Software license.          *
// ********************************************************************
//
// Implementation of methods for the class G4IntersectionSolid
//
// 22.07.11 T.Nikitina: added detection of infinite loop in DistanceToIn(p,v)
// 19.10.98 V.Grichine: new algorithm of DistanceToIn(p,v)
// 14.10.98 V.Grichine: implementation of the first version 
// --------------------------------------------------------------------
 
#include "G4SubtractionSolid.hh"
 
#include "G4SystemOfUnits.hh"
#include "G4VoxelLimits.hh"
#include "G4VPVParameterisation.hh"
#include "G4GeometryTolerance.hh"
 
#include "G4VGraphicsScene.hh"
#include "G4Polyhedron.hh"
#include "G4PolyhedronArbitrary.hh"
#include "HepPolyhedronProcessor.h"
 
#include "G4IntersectionSolid.hh"
 
#include <sstream>
 
//////////////////////////////////////////////////////////////////////////
//
// Transfer all data members to G4BooleanSolid which is responsible
// for them. pName will be in turn sent to G4VSolid
 
G4SubtractionSolid::G4SubtractionSolid( const G4String& pName,
                                              G4VSolid* pSolidA ,
                                              G4VSolid* pSolidB   )
  : G4BooleanSolid(pName,pSolidA,pSolidB)
{
}
 
//////////////////////////////////////////////////////////////////////////
//
// Constructor
 
G4SubtractionSolid::G4SubtractionSolid( const G4String& pName,
                                              G4VSolid* pSolidA ,
                                              G4VSolid* pSolidB ,
                                              G4RotationMatrix* rotMatrix,
                                        const G4ThreeVector& transVector )
  : G4BooleanSolid(pName,pSolidA,pSolidB,rotMatrix,transVector)
{
} 
 
//////////////////////////////////////////////////////////////////////////
//
// Constructor
 
G4SubtractionSolid::G4SubtractionSolid( const G4String& pName,
                                              G4VSolid* pSolidA ,
                                              G4VSolid* pSolidB ,
                                        const G4Transform3D& transform )
  : G4BooleanSolid(pName,pSolidA,pSolidB,transform)
{
}
 
//////////////////////////////////////////////////////////////////////////
//
// Fake default constructor - sets only member data and allocates memory
//                            for usage restricted to object persistency.
 
G4SubtractionSolid::G4SubtractionSolid( __void__& a )
  : G4BooleanSolid(a)
{
}
 
//////////////////////////////////////////////////////////////////////////
//
// Destructor
 
G4SubtractionSolid::~G4SubtractionSolid() = default;
 
//////////////////////////////////////////////////////////////////////////
//
// Copy constructor
 
G4SubtractionSolid::G4SubtractionSolid(const G4SubtractionSolid&) = default;
 
//////////////////////////////////////////////////////////////////////////
//
// Assignment operator
 
G4SubtractionSolid&
G4SubtractionSolid::operator = (const G4SubtractionSolid& rhs) 
{
  // Check assignment to self
  //
  if (this == &rhs)  { return *this; }
 
  // Copy base class data
  //
  G4BooleanSolid::operator=(rhs);
 
  return *this;
}  
 
//////////////////////////////////////////////////////////////////////////
//
// Get bounding box
 
void
G4SubtractionSolid::BoundingLimits(G4ThreeVector& pMin,
                                   G4ThreeVector& pMax) const
{
  // Since it is unclear how the shape of the first solid will be changed
  // after subtraction, just return its original bounding box.
  //
  fPtrSolidA->BoundingLimits(pMin,pMax);
 
  // Check correctness of the bounding box
  //
  if (pMin.x() >= pMax.x() || pMin.y() >= pMax.y() || pMin.z() >= pMax.z())
  {
    std::ostringstream message;
    message << "Bad bounding box (min >= max) for solid: "
            << GetName() << " !"
            << "\npMin = " << pMin
            << "\npMax = " << pMax;
    G4Exception("G4SubtractionSolid::BoundingLimits()", "GeomMgt0001",
                JustWarning, message);
    DumpInfo();
  }
}
 
//////////////////////////////////////////////////////////////////////////
//
// Calculate extent under transform and specified limit
     
G4bool 
G4SubtractionSolid::CalculateExtent( const EAxis pAxis,
                                     const G4VoxelLimits& pVoxelLimit,
                                     const G4AffineTransform& pTransform,
                                           G4double& pMin,
                                           G4double& pMax ) const 
{
  // Since we cannot be sure how much the second solid subtracts 
  // from the first, we must use the first solid's extent!
 
  return fPtrSolidA->CalculateExtent( pAxis, pVoxelLimit, 
                                      pTransform, pMin, pMax );
}
 
//////////////////////////////////////////////////////////////////////////
//
// Touching ? Empty subtraction ?
 
EInside G4SubtractionSolid::Inside( const G4ThreeVector& p ) const
{
  EInside positionA = fPtrSolidA->Inside(p);
  if (positionA == kOutside) return positionA; // outside A
 
  EInside positionB = fPtrSolidB->Inside(p);
  if (positionB == kOutside) return positionA;
 
  if (positionB == kInside) return kOutside;
  if (positionA == kInside) return kSurface; // surface B
 
  // Point is on both surfaces
  //
  static const G4double rtol = 1000*kCarTolerance;
 
  return ((fPtrSolidA->SurfaceNormal(p) -
           fPtrSolidB->SurfaceNormal(p)).mag2() > rtol) ? kSurface : kOutside;
}
 
//////////////////////////////////////////////////////////////////////////
//
// SurfaceNormal
 
G4ThreeVector 
G4SubtractionSolid::SurfaceNormal( const G4ThreeVector& p ) const 
{
  G4ThreeVector normal;
 
  EInside InsideA = fPtrSolidA->Inside(p);
  EInside InsideB = fPtrSolidB->Inside(p); 
 
  if( InsideA == kOutside )
  {
#ifdef G4BOOLDEBUG
    G4cout << "WARNING - Invalid call [1] in "
           << "G4SubtractionSolid::SurfaceNormal(p)" << G4endl
           << "  Point p is outside !" << G4endl;
    G4cout << "          p = " << p << G4endl;
    G4cerr << "WARNING - Invalid call [1] in "
           << "G4SubtractionSolid::SurfaceNormal(p)" << G4endl
           << "  Point p is outside !" << G4endl;
    G4cerr << "          p = " << p << G4endl;
#endif
    normal = fPtrSolidA->SurfaceNormal(p) ;
  }
  else if( InsideA == kSurface && 
           InsideB != kInside      ) 
  {
    normal = fPtrSolidA->SurfaceNormal(p) ;
  }
  else if( InsideA == kInside && 
           InsideB != kOutside    )
  {
    normal = -fPtrSolidB->SurfaceNormal(p) ;
  }
  else 
  {
    if ( fPtrSolidA->DistanceToOut(p) <= fPtrSolidB->DistanceToIn(p) )
    {
      normal = fPtrSolidA->SurfaceNormal(p) ;
    }
    else
    {
      normal = -fPtrSolidB->SurfaceNormal(p) ;
    }
#ifdef G4BOOLDEBUG
    if(Inside(p) == kInside)
    {
      G4cout << "WARNING - Invalid call [2] in "
             << "G4SubtractionSolid::SurfaceNormal(p)" << G4endl
             << "  Point p is inside !" << G4endl;
      G4cout << "          p = " << p << G4endl;
      G4cerr << "WARNING - Invalid call [2] in "
             << "G4SubtractionSolid::SurfaceNormal(p)" << G4endl
             << "  Point p is inside !" << G4endl;
      G4cerr << "          p = " << p << G4endl;
    }
#endif
  }
  return normal;
}
 
//////////////////////////////////////////////////////////////////////////
//
// The same algorithm as in DistanceToIn(p)
 
G4double 
G4SubtractionSolid::DistanceToIn( const G4ThreeVector& p,
                                  const G4ThreeVector& v ) const 
{
  G4double dist = 0.0, dist2 = 0.0, disTmp = 0.0;
    
#ifdef G4BOOLDEBUG
  if( Inside(p) == kInside )
  {
    G4cout << "WARNING - Invalid call in "
           << "G4SubtractionSolid::DistanceToIn(p,v)" << G4endl
           << "  Point p is inside !" << G4endl;
    G4cout << "          p = " << p << G4endl;
    G4cout << "          v = " << v << G4endl;
    G4cerr << "WARNING - Invalid call in "
           << "G4SubtractionSolid::DistanceToIn(p,v)" << G4endl
           << "  Point p is inside !" << G4endl;
    G4cerr << "          p = " << p << G4endl;
    G4cerr << "          v = " << v << G4endl;
  }
#endif
 
    // if( // ( fPtrSolidA->Inside(p) != kOutside) &&  // case1:p in both A&B 
    if ( fPtrSolidB->Inside(p) != kOutside )   // start: out of B
    {
      dist = fPtrSolidB->DistanceToOut(p,v) ; // ,calcNorm,validNorm,n) ;
      
      if( fPtrSolidA->Inside(p+dist*v) != kInside )
      {
        G4int count1=0;
        do   // Loop checking, 13.08.2015, G.Cosmo
        {
          disTmp = fPtrSolidA->DistanceToIn(p+dist*v,v) ;
 
          if(disTmp == kInfinity)
          {  
            return kInfinity ;
          }
          dist += disTmp ;
 
          if( Inside(p+dist*v) == kOutside )
          {
            disTmp = fPtrSolidB->DistanceToOut(p+dist*v,v) ;
            dist2 = dist+disTmp;
            if (dist == dist2)  { return dist; }   // no progress
            dist = dist2 ;
            ++count1;
            if( count1 > 1000 )  // Infinite loop detected
            {
              G4String nameB = fPtrSolidB->GetName();
              if(fPtrSolidB->GetEntityType()=="G4DisplacedSolid")
              {
                nameB = (dynamic_cast<G4DisplacedSolid*>(fPtrSolidB))
                        ->GetConstituentMovedSolid()->GetName();
              }
              std::ostringstream message;
              message << "Illegal condition caused by solids: "
                      << fPtrSolidA->GetName() << " and " << nameB << G4endl;
              message.precision(16);
              message << "Looping detected in point " << p+dist*v
                      << ", from original point " << p
                      << " and direction " << v << G4endl
                      << "Computed candidate distance: " << dist << "*mm. ";
              message.precision(6);
              DumpInfo();
              G4Exception("G4SubtractionSolid::DistanceToIn(p,v)",
                          "GeomSolids1001", JustWarning, message,
                          "Returning candidate distance.");
              return dist;
            }
          }    
        }
        while( Inside(p+dist*v) == kOutside ) ;
      }
    }
    else // p outside A, start in A
    {
      dist = fPtrSolidA->DistanceToIn(p,v) ;
 
      if( dist == kInfinity ) // past A, hence past A\B
      {
        return kInfinity ;
      }
      else
      {
        G4int count2=0;
        while( Inside(p+dist*v) == kOutside )  // pushing loop
        {
          disTmp = fPtrSolidB->DistanceToOut(p+dist*v,v) ;
          dist += disTmp ;
 
          if( Inside(p+dist*v) == kOutside )
          { 
            disTmp = fPtrSolidA->DistanceToIn(p+dist*v,v) ;
 
            if(disTmp == kInfinity) // past A, hence past A\B
            {  
              return kInfinity ;
            }                 
            dist2 = dist+disTmp;
            if (dist == dist2)  { return dist; }   // no progress
            dist = dist2 ;
            ++count2;
            if( count2 > 1000 )  // Infinite loop detected
            {
              G4String nameB = fPtrSolidB->GetName();
              if(fPtrSolidB->GetEntityType()=="G4DisplacedSolid")
              {
                nameB = (dynamic_cast<G4DisplacedSolid*>(fPtrSolidB))
                        ->GetConstituentMovedSolid()->GetName();
              }
              std::ostringstream message;
              message << "Illegal condition caused by solids: "
                      << fPtrSolidA->GetName() << " and " << nameB << G4endl;
              message.precision(16);
              message << "Looping detected in point " << p+dist*v
                      << ", from original point " << p
                      << " and direction " << v << G4endl
                      << "Computed candidate distance: " << dist << "*mm. ";
              message.precision(6);
              DumpInfo();
              G4Exception("G4SubtractionSolid::DistanceToIn(p,v)",
                          "GeomSolids1001", JustWarning, message,
                          "Returning candidate distance.");
              return dist;
            }
          }
        }    // Loop checking, 13.08.2015, G.Cosmo
      }
    }
  
  return dist ;
}
 
//////////////////////////////////////////////////////////////////////////
//
// Approximate nearest distance from the point p to the intersection of
// two solids. It is usually underestimated from the point of view of
// isotropic safety
 
G4double 
G4SubtractionSolid::DistanceToIn( const G4ThreeVector& p ) const 
{
  G4double dist = 0.0;
 
#ifdef G4BOOLDEBUG
  if( Inside(p) == kInside )
  {
    G4cout << "WARNING - Invalid call in "
           << "G4SubtractionSolid::DistanceToIn(p)" << G4endl
           << "  Point p is inside !" << G4endl;
    G4cout << "          p = " << p << G4endl;
    G4cerr << "WARNING - Invalid call in "
           << "G4SubtractionSolid::DistanceToIn(p)" << G4endl
           << "  Point p is inside !" << G4endl;
    G4cerr << "          p = " << p << G4endl;
  }
#endif
 
  if( ( fPtrSolidA->Inside(p) != kOutside) &&   // case 1
      ( fPtrSolidB->Inside(p) != kOutside)    )
  {
    dist = fPtrSolidB->DistanceToOut(p);
  }
  else
  {
    dist = fPtrSolidA->DistanceToIn(p); 
  }
  
  return dist; 
}
 
//////////////////////////////////////////////////////////////////////////
//
// The same algorithm as DistanceToOut(p)
 
G4double 
G4SubtractionSolid::DistanceToOut( const G4ThreeVector& p,
                                   const G4ThreeVector& v,
                                   const G4bool calcNorm,
                                         G4bool* validNorm,
                                         G4ThreeVector* n ) const 
{
#ifdef G4BOOLDEBUG
    if( Inside(p) == kOutside )
    {
      G4cout << "Position:"  << G4endl << G4endl;
      G4cout << "p.x() = "   << p.x()/mm << " mm" << G4endl;
      G4cout << "p.y() = "   << p.y()/mm << " mm" << G4endl;
      G4cout << "p.z() = "   << p.z()/mm << " mm" << G4endl << G4endl;
      G4cout << "Direction:" << G4endl << G4endl;
      G4cout << "v.x() = "   << v.x() << G4endl;
      G4cout << "v.y() = "   << v.y() << G4endl;
      G4cout << "v.z() = "   << v.z() << G4endl << G4endl;
      G4cout << "WARNING - Invalid call in "
             << "G4SubtractionSolid::DistanceToOut(p,v)" << G4endl
             << "  Point p is outside !" << G4endl;
      G4cout << "          p = " << p << G4endl;
      G4cout << "          v = " << v << G4endl;
      G4cerr << "WARNING - Invalid call in "
             << "G4SubtractionSolid::DistanceToOut(p,v)" << G4endl
             << "  Point p is outside !" << G4endl;
      G4cerr << "          p = " << p << G4endl;
      G4cerr << "          v = " << v << G4endl;
    }
#endif
 
    G4double distout;
    G4double distA = fPtrSolidA->DistanceToOut(p,v,calcNorm,validNorm,n) ;
    G4double distB = fPtrSolidB->DistanceToIn(p,v) ;
    if(distB < distA)
    {
      if(calcNorm)
      {
        *n = -(fPtrSolidB->SurfaceNormal(p+distB*v)) ;
        *validNorm = false ;
      }
      distout= distB ;
    }
    else
    {
      distout= distA ; 
    } 
    return distout;
}
 
//////////////////////////////////////////////////////////////////////////
//
// Inverted algorithm of DistanceToIn(p)
 
G4double 
G4SubtractionSolid::DistanceToOut( const G4ThreeVector& p ) const 
{
  G4double dist=0.0;
 
  if( Inside(p) == kOutside )
  { 
#ifdef G4BOOLDEBUG
    G4cout << "WARNING - Invalid call in "
           << "G4SubtractionSolid::DistanceToOut(p)" << G4endl
           << "  Point p is outside" << G4endl;
    G4cout << "          p = " << p << G4endl;
    G4cerr << "WARNING - Invalid call in "
           << "G4SubtractionSolid::DistanceToOut(p)" << G4endl
           << "  Point p is outside" << G4endl;
    G4cerr << "          p = " << p << G4endl;
#endif
  }
  else
  {
     dist= std::min(fPtrSolidA->DistanceToOut(p),
                      fPtrSolidB->DistanceToIn(p) ) ; 
  }
  return dist; 
}
 
//////////////////////////////////////////////////////////////////////////
//
//
 
G4GeometryType G4SubtractionSolid::GetEntityType() const 
{
  return {"G4SubtractionSolid"};
}
 
//////////////////////////////////////////////////////////////////////////
//
// Make a clone of the object
 
G4VSolid* G4SubtractionSolid::Clone() const
{
  return new G4SubtractionSolid(*this);
}
 
//////////////////////////////////////////////////////////////////////////
//
// ComputeDimensions
 
void 
G4SubtractionSolid::ComputeDimensions(       G4VPVParameterisation*,
                                       const G4int,
                                       const G4VPhysicalVolume* ) 
{
}
 
//////////////////////////////////////////////////////////////////////////
//
// DescribeYourselfTo
 
void 
G4SubtractionSolid::DescribeYourselfTo ( G4VGraphicsScene& scene ) const 
{
  scene.AddSolid (*this);
}
 
//////////////////////////////////////////////////////////////////////////
//
// CreatePolyhedron
 
G4Polyhedron* G4SubtractionSolid::CreatePolyhedron () const 
{
  if (fExternalBoolProcessor == nullptr)
  {
    HepPolyhedronProcessor processor;
    // Stack components and components of components recursively
    // See G4BooleanSolid::StackPolyhedron
    G4Polyhedron* top = StackPolyhedron(processor, this);
    auto result = new G4Polyhedron(*top);
    if (processor.execute(*result))
    {
      return result;
    }
    else
    {
      return nullptr;
    }
  }
  else
  {
    return fExternalBoolProcessor->Process(this);
  }
}
 
//////////////////////////////////////////////////////////////////////////
//
// GetCubicVolume
//
 
G4double G4SubtractionSolid::GetCubicVolume()
{
  if( fCubicVolume >= 0. )
  {
    return fCubicVolume;
  }
  G4ThreeVector bminA, bmaxA, bminB, bmaxB;
  fPtrSolidA->BoundingLimits(bminA, bmaxA);
  fPtrSolidB->BoundingLimits(bminB, bmaxB);
  G4bool noIntersection =
     bminA.x() >= bmaxB.x() || bminA.y() >= bmaxB.y() || bminA.z() >= bmaxB.z() ||
     bminB.x() >= bmaxA.x() || bminB.y() >= bmaxA.y() || bminB.z() >= bmaxA.z();
 
  if (noIntersection)
  {
    fCubicVolume = fPtrSolidA->GetCubicVolume();
  }
  else
  {
    if (GetNumOfConstituents() > 10)
    {
      fCubicVolume = G4BooleanSolid::GetCubicVolume();
    }
    else
    {
      G4IntersectionSolid intersectVol("Temporary-Intersection-for-Subtraction",
                                        fPtrSolidA, fPtrSolidB);
      intersectVol.SetCubVolStatistics(GetCubVolStatistics());
      intersectVol.SetCubVolEpsilon(GetCubVolEpsilon());
 
      G4double cubVolumeA = fPtrSolidA->GetCubicVolume();
      fCubicVolume = cubVolumeA - intersectVol.GetCubicVolume();
      if (fCubicVolume < 0.01*cubVolumeA) fCubicVolume = G4BooleanSolid::GetCubicVolume();
    }
  }
  return fCubicVolume;
}