G4FRConst.hh

Go to the documentation of this file.

//
// ********************************************************************
// * License and Disclaimer                                           *
// *                                                                  *
// * The  Geant4 software  is  copyright of the Copyright Holders  of *
// * the Geant4 Collaboration.  It is provided  under  the terms  and *
// * conditions of the Geant4 Software License,  included in the file *
// * LICENSE and available at  http://cern.ch/geant4/license .  These *
// * include a list of copyright holders.                             *
// *                                                                  *
// * Neither the authors of this software system, nor their employing *
// * institutes,nor the agencies providing financial support for this *
// * work  make  any representation or  warranty, express or implied, *
// * regarding  this  software system or assume any liability for its *
// * use.  Please see the license in the file  LICENSE  and URL above *
// * for the full disclaimer and the limitation of liability.         *
// *                                                                  *
// * This  code  implementation is the result of  the  scientific and *
// * technical work of the GEANT4 collaboration.                      *
// * By using,  copying,  modifying or  distributing the software (or *
// * any work based  on the software)  you  agree  to acknowledge its *
// * use  in  resulting  scientific  publications,  and indicate your *
// * acceptance of all terms of the Geant4 Software license.          *
// ********************************************************************
//
//
// $Id$
//
// Satoshi TANAKA, Tue Jul  2 15:30:49 JST 1996
///////////////////////////////////
///// G4FRConst.hh /////
///////////////////////////////////
 
#if !defined G4_FR_COMMAND_LIST_HH
#define G4_FR_COMMAND_LIST_HH
 
    //----- Header comment
const   char  FR_G4_PRIM_HEADER        [] = "##G4.PRIM-FORMAT-2.4" ;
//const   char  FR_PHYSICAL_VOLUME_NAME  [] = "#/PhysicalVolumeName" ;
const   char  FR_PHYSICAL_VOLUME_NAME  [] = "#/PVName" ;
 
    //----- Execution control (beginning with !)
const   char  FR_GUI                   [] = "!GraphicalUserInterface" ;
const   char  FR_DEVICE                [] = "!Device"           ;
const   char  FR_SET_CAMERA            [] = "!SetCamera"        ;
const   char  FR_OPEN_DEVICE           [] = "!OpenDevice"       ;
const   char  FR_CLOSE_DEVICE          [] = "!CloseDevice"      ;
const   char  FR_DRAW_ALL              [] = "!DrawAll"          ;
const   char  FR_CLEAR_DATA            [] = "!ClearData"        ;
const   char  FR_QUIT                  [] = "!Quit"             ;
const   char  FR_DISCONNECT_DAWND      [] = "!DisconnectDawnd"  ;
const   char  FR_TERMINATE_DAWND       [] = "!TerminateDawnd"   ;
const   char  FR_SAVE                  [] = "!Save"             ;
const   char  FR_END_SAVE              [] = "!EndSave"          ;
const   char  FR_WAIT                  [] = "!Wait"             ;
const   char  FR_PAUSE                 [] = "!Pause"            ;
 
    //----- Drawing Style
const   char  FR_WIREFRAME   [] = "/Wireframe" ;
const   char  FR_SURFACE     [] = "/Surface"   ;
const   char  FR_LINES       [] = "/Lines"     ;
 
    //----- Begin and End of Modeling
const   char  FR_BEGIN_MODELING        [] = "!BeginModeling"    ;
const   char  FR_END_MODELING          [] = "!EndModeling"      ;
 
    //----- Bounding box
const   char  FR_BOUNDING_BOX   [] = "/BoundingBox"    ;
const   char  FR_BOUNDING_BOX_UNIT [] = "/BoundingBox -0.5 -0.5 -0.5  0.5 0.5 0.5" ;
 
    //----- Number of divising curved surface
const   int   FR_DEFALUT_NDIV_VALUE = 24 ;
 
const   char  FR_NDIV           [] = "/Ndiv"           ;
const   char  FR_NDIV_DEFAULT [] = "/Ndiv  24" ;
const   char  FR_NDIV_3  [] = "/Ndiv   3"      ;
const   char  FR_NDIV_4  [] = "/Ndiv   4"      ;
const   char  FR_NDIV_8  [] = "/Ndiv   8"      ;
const   char  FR_NDIV_16 [] = "/Ndiv  16"      ;
const   char  FR_NDIV_24 [] = "/Ndiv  24"      ;
const   char  FR_NDIV_48 [] = "/Ndiv  48"      ;
const   char  FR_NDIV_96 [] = "/Ndiv  96"      ;
 
    //----- Camera information
const   char  FR_CAMERA_POSITION[] = "/CameraPosition" ;
const   char  FR_CAMERA_POSITION_DEFAULT[] = "/CameraPosition  100000.0  0.0  0.0" ;
                // see from far upward position
const   char  FR_TARGET_POINT   [] = "/TargetPoint";
const   char  FR_ZOOM_FACTOR    [] = "/ZoomFactor";
const   char  FR_SCALE          [] = "/Scale";
const   char  FR_FOCAL_DISTANCE [] = "/FocalDistance";
 
    //----- Body coordinate information
const   char  FR_BASE_VECTOR    [] = "/BaseVector" ; 
            // Give e1 and e2. Then e3 is calculated. 
const   char  FR_BASE_VECTOR_DEFAULT    [] = "/BaseVector 1.0 0.0 0.0  0.0 1.0 0.0"  ;
const   char  FR_ORIGIN         [] = "/Origin"         ;
const   char  FR_ORIGIN_DEFAULT [] = "/Origin  0.0  0.0  0.0"  ;
 
    //----- Attribute information
const   char  FR_DIFFUSE_RGB       []  = "/DiffuseRGB" ;
                    // old name of /ColorRGB
 
const   char  FR_COLOR_RGB         []  = "/ColorRGB"   ;
const   char  FR_COLOR_RGB_DEFAULT []  = "/ColorRGB  1.0  1.0  1.0" ;
const   char  FR_COLOR_RGB_WHITE   []  = "/ColorRGB  1.0  1.0  1.0" ;
 
const   char  FR_COLOR_RGB_RED     []  = "/ColorRGB  1.0  0.0  0.0" ;
const   char  FR_COLOR_RGB_GREEN   []  = "/ColorRGB  0.0  1.0  0.0" ;
const   char  FR_COLOR_RGB_BLUE    []  = "/ColorRGB  0.0  0.0  1.0" ;
 
const   char  FR_COLOR_RGB_CYAN    []  = "/ColorRGB  0.0  1.0  1.0" ;
const   char  FR_COLOR_RGB_MAGENTA []  = "/ColorRGB  1.0  0.0  1.0" ;
const   char  FR_COLOR_RGB_YELLOW  []  = "/ColorRGB  1.0  1.0  0.0" ;
 
const   char  FR_SPECULAR_RGB   [] = "/SpecularRGB"  ;
const   char  FR_SPECULAR_RGB_DEFAULT [] = "/SpecularRGB  1.0  1.0  1.0"  ;
const   char  FR_SPECULAR_RGB_WHITE   [] = "/SpecularRGB  1.0  1.0  1.0"  ;
 
const   char  FR_PHONG_POWER    [] = "/PhongPower"   ;
const   char  FR_PHONG_POWER_DEFAULT [] = "/PhongPower  3"   ;
 
const   char  FR_TRANSPARENCY   [] = "/Transparency" ;
const   char  FR_TRANSPARENCY_ON   [] = "/Transparency  1 " ; // transparent
const   char  FR_TRANSPARENCY_OFF  [] = "/Transparency  0 " ; // non-transparent
 
const   char  FR_FORCE_WIREFRAME   [] = "/ForceWireframe" ;
const   char  FR_FORCE_WIREFRAME_ON   [] = "/ForceWireframe  1" ;
const   char  FR_FORCE_WIREFRAME_OFF  [] = "/ForceWireframe  0" ;
 
const   char  FR_VISIBILITY     [] = "/Visibility"   ;
const   char  FR_VISIBILITY_ON     [] = "/Visibility  1"    ; // visible
const   char  FR_VISIBILITY_OFF    [] = "/Visibility  0"    ; // invisible
 
    //----- 3D Primitives
const   char  FR_POLYHEDRON     [] = "/Polyhedron"    ;
const   char  FR_VERTEX         [] = "/Vertex"        ;
const   char  FR_FACET          [] = "/Facet"         ;
const   char  FR_END_POLYHEDRON [] = "/EndPolyhedron" ;
 
const   char  FR_BOX            [] = "/Box"            ; 
const   char  FR_BOX_UNIT  [] = "/Box  0.5  0.5  0.5" ; // dx, dy, dz
 
const   char  FR_COLUMN         [] = "/Column"         ; 
const   char  FR_COLUMN_UNIT [] = "/Column 0.5  0.5" ; // R dz
 
const   char  FR_POLYLINE         [] = "/Polyline"          ; 
const   char  FR_PL_VERTEX        [] = "/PLVertex"          ; 
const   char  FR_PL_VERTEX_OLD    [] = "PLVertex"           ; 
const   char  FR_END_POLYLINE     [] = "/EndPolyline"       ; 
 
const   char  FR_TRD            [] = "/Trd"                  ; 
    // /Trd  dx1 dx2 dy1 dy2 dz    ; 
const   char  FR_TRAP           [] = "/Trap"                 ; 
    // /Trap dz theta phi h1 bl1 tl1 alpha1 h2 bl2 tl2 alpha2
const   char  FR_TUBS           [] = "/Tubs"                 ; 
    // /Tubs rmin rmax dz sphi dphi  
const   char  FR_CONS           [] = "/Cons"                 ; 
    // /Cons rmin1 rmax1 rmin2 rmax2 dz sphi dphi  
const   char  FR_SPHERE           [] = "/Sphere"             ; 
    // /Sphere  R
const   char  FR_SPHERE_SEG       [] = "/SphereSeg"          ; 
    // /SphereSeg  rmin rmax s_theta d_theta s_phi d_phi
const   char  FR_PARA             [] = "/Parallelepiped"     ;
    // /Parallelepiped  dx dy dz tanAlpha tanTheta_cosPhi tanTheta_sinPhi
const   char  FR_PCON             [] = "/PolyCone"           ;
    // /PolyCone  sphi  dphi  nz  z[nz]  rmin[nz]  rmax[nz]
const   char  FR_PGON             [] = "/PolyGon"            ;
    // /PolyGon   sphi  dphi  ndiv  nz  z[nz]  rmin[nz]  rmax[nz]
const   char  FR_TORUS            [] = "/Torus"              ;
    // /PolyGon   sphi  dphi  ndiv  nz  z[nz]  rmin[nz]  rmax[nz]
 
//----- Marks I (arg: x y z half_size_3d)
const   char  FR_FONT_NAME       [] = "/FontName" ;
 
//----- Marks I (arg: x y z half_size_3d)
const   char  FR_MARK_CIRCLE_2D  [] = "/MarkCircle2D"   ; 
const   char  FR_MARK_SQUARE_2D  [] = "/MarkSquare2D"   ; 
const   char  FR_MARK_TEXT_2D    [] = "/MarkText2D"   ; 
    // /MarkText2D  x y z  size_world x_offset_world y_offset_world string
 
//----- Marks II (arg: x y z half_size_2d)
const   char  FR_MARK_CIRCLE_2DS  [] = "/MarkCircle2DS"   ; 
const   char  FR_MARK_SQUARE_2DS  [] = "/MarkSquare2DS"   ; 
const   char  FR_MARK_TEXT_2DS    [] = "/MarkText2DS"   ; 
    // /MarkText2DS  x y z  size_pt x_offset_pt y_offset_pt string
 
//----- Text
const   char  FR_TEXT_2DS    [] = "/Text2DS"   ;    
 
//----- For DAWNCUT
const   char  FR_CLIPPING_PLANE  [] = "/ClippingPlane"   ; 
    // /ClippingPlaneMarkCross2D  a b c d 
    //   for plane   ax + by + cz + d = 0 
 
#endif