G4ParameterisationPolyconeRho Class Reference

#include <G4ParameterisationPolycone.hh>

Inheritance diagram for G4ParameterisationPolyconeRho:

Public Member Functions
	G4ParameterisationPolyconeRho (EAxis axis, G4int nCopies, G4double offset, G4double step, G4VSolid *motherSolid, DivisionType divType)
	~G4ParameterisationPolyconeRho ()
void	CheckParametersValidity ()
G4double	GetMaxParameter () const
void	ComputeTransformation (const G4int copyNo, G4VPhysicalVolume *physVol) const
void	ComputeDimensions (G4Polycone &pcone, const G4int copyNo, const G4VPhysicalVolume *physVol) const
Public Member Functions inherited from G4VParameterisationPolycone
	G4VParameterisationPolycone (EAxis axis, G4int nCopies, G4double offset, G4double step, G4VSolid *msolid, DivisionType divType)
virtual	~G4VParameterisationPolycone ()
Public Member Functions inherited from G4VDivisionParameterisation
	G4VDivisionParameterisation (EAxis axis, G4int nDiv, G4double width, G4double offset, DivisionType divType, G4VSolid *motherSolid=0)
virtual	~G4VDivisionParameterisation ()
virtual G4VSolid *	ComputeSolid (const G4int, G4VPhysicalVolume *)
virtual void	ComputeTransformation (const G4int copyNo, G4VPhysicalVolume *physVol) const =0
const G4String &	GetType () const
EAxis	GetAxis () const
G4int	GetNoDiv () const
G4double	GetWidth () const
G4double	GetOffset () const
G4VSolid *	GetMotherSolid () const
void	SetType (const G4String &type)
G4int	VolumeFirstCopyNo () const
void	SetHalfGap (G4double hg)
G4double	GetHalfGap () const
Public Member Functions inherited from G4VPVParameterisation
	G4VPVParameterisation ()
virtual	~G4VPVParameterisation ()
virtual void	ComputeTransformation (const G4int, G4VPhysicalVolume *) const =0
virtual G4VSolid *	ComputeSolid (const G4int, G4VPhysicalVolume *)
virtual G4Material *	ComputeMaterial (const G4int repNo, G4VPhysicalVolume *currentVol, const G4VTouchable *parentTouch=0)
virtual G4bool	IsNested () const
virtual G4VVolumeMaterialScanner *	GetMaterialScanner ()
virtual void	ComputeDimensions (G4Box &, const G4int, const G4VPhysicalVolume *) const
virtual void	ComputeDimensions (G4Tubs &, const G4int, const G4VPhysicalVolume *) const
virtual void	ComputeDimensions (G4Trd &, const G4int, const G4VPhysicalVolume *) const
virtual void	ComputeDimensions (G4Trap &, const G4int, const G4VPhysicalVolume *) const
virtual void	ComputeDimensions (G4Cons &, const G4int, const G4VPhysicalVolume *) const
virtual void	ComputeDimensions (G4Sphere &, const G4int, const G4VPhysicalVolume *) const
virtual void	ComputeDimensions (G4Orb &, const G4int, const G4VPhysicalVolume *) const
virtual void	ComputeDimensions (G4Torus &, const G4int, const G4VPhysicalVolume *) const
virtual void	ComputeDimensions (G4Para &, const G4int, const G4VPhysicalVolume *) const
virtual void	ComputeDimensions (G4Polycone &, const G4int, const G4VPhysicalVolume *) const
virtual void	ComputeDimensions (G4Polyhedra &, const G4int, const G4VPhysicalVolume *) const
virtual void	ComputeDimensions (G4Hype &, const G4int, const G4VPhysicalVolume *) const

Additional Inherited Members
Protected Member Functions inherited from G4VDivisionParameterisation
void	ChangeRotMatrix (G4VPhysicalVolume *physVol, G4double rotZ=0.) const
G4int	CalculateNDiv (G4double motherDim, G4double width, G4double offset) const
G4double	CalculateWidth (G4double motherDim, G4int nDiv, G4double offset) const
virtual void	CheckParametersValidity ()
void	CheckOffset (G4double maxPar)
void	CheckNDivAndWidth (G4double maxPar)
virtual G4double	GetMaxParameter () const =0
G4double	OffsetZ () const
Protected Attributes inherited from G4VDivisionParameterisation
G4String	ftype
EAxis	faxis
G4int	fnDiv
G4double	fwidth
G4double	foffset
DivisionType	fDivisionType
G4VSolid *	fmotherSolid
G4bool	fReflectedSolid
G4bool	fDeleteSolid
G4int	theVoluFirstCopyNo
G4double	kCarTolerance
G4double	fhgap
Static Protected Attributes inherited from G4VDivisionParameterisation
static G4int	verbose = 5

Detailed Description

Definition at line 79 of file G4ParameterisationPolycone.hh.

Constructor & Destructor Documentation

G4ParameterisationPolyconeRho()

G4ParameterisationPolyconeRho::G4ParameterisationPolyconeRho	(	EAxis	axis,
		G4int	nCopies,
		G4double	offset,
		G4double	step,
		G4VSolid *	motherSolid,
		DivisionType	divType
	)

Definition at line 98 of file G4ParameterisationPolycone.cc.

  :  G4VParameterisationPolycone( axis, nDiv, width, offset, msolid, divType )
{
  CheckParametersValidity();
  SetType( "DivisionPolyconeRho" );
 
  G4Polycone* msol = (G4Polycone*)(fmotherSolid);
  G4PolyconeHistorical* origparamMother = msol->GetOriginalParameters();
 
  if( divType == DivWIDTH )
  {
    fnDiv = CalculateNDiv( origparamMother->Rmax[0]
                         - origparamMother->Rmin[0], width, offset );
  }
  else if( divType == DivNDIV )
  {
    fwidth = CalculateWidth( origparamMother->Rmax[0]
                           - origparamMother->Rmin[0], nDiv, offset );
  }
 
#ifdef G4DIVDEBUG
  if( verbose >= -1 )
  {
    G4cout << " G4ParameterisationPolyconeRho - # divisions " << fnDiv
           << " = " << nDiv << G4endl
           << " Offset " << foffset << " = " << offset << G4endl
           << " Width " << fwidth << " = " << width << G4endl;
  }
#endif
}

~G4ParameterisationPolyconeRho()

G4ParameterisationPolyconeRho::~G4ParameterisationPolyconeRho

(

)

Definition at line 133 of file G4ParameterisationPolycone.cc.

{
}

Member Function Documentation

CheckParametersValidity()

void G4ParameterisationPolyconeRho::CheckParametersValidity ( )

virtual

Reimplemented from G4VDivisionParameterisation.

Definition at line 138 of file G4ParameterisationPolycone.cc.

{
  G4VDivisionParameterisation::CheckParametersValidity();
 
  G4Polycone* msol = (G4Polycone*)(fmotherSolid);
 
  if( fDivisionType == DivNDIVandWIDTH || fDivisionType == DivWIDTH )
  {
    std::ostringstream message;
    message << "In solid " << msol->GetName() << G4endl
            << "Division along R will be done with a width "
            << "different for each solid section." << G4endl
            << "WIDTH will not be used !";
    G4Exception("G4VParameterisationPolycone::CheckParametersValidity()",
                "GeomDiv1001", JustWarning, message);
  }
  if( foffset != 0. )
  {
    std::ostringstream message;
    message << "In solid " << msol->GetName() << G4endl
            << "Division along  R will be done with a width "
            << "different for each solid section." << G4endl
            << "OFFSET will not be used !";
    G4Exception("G4VParameterisationPolycone::CheckParametersValidity()",
                "GeomDiv1001", JustWarning, message);
  }
}

Referenced by G4ParameterisationPolyconeRho().

ComputeDimensions()

void G4ParameterisationPolyconeRho::ComputeDimensions ( G4Polycone &  pcone, const G4int  copyNo, const G4VPhysicalVolume *  physVol  ) const

virtual

Reimplemented from G4VPVParameterisation.

Definition at line 212 of file G4ParameterisationPolycone.cc.

{
  G4Polycone* msol = (G4Polycone*)(fmotherSolid);
 
  G4PolyconeHistorical* origparamMother = msol->GetOriginalParameters();
  G4PolyconeHistorical origparam( *origparamMother );
  G4int nZplanes = origparamMother->Num_z_planes;
 
  G4double width = 0.;
  for( G4int ii = 0; ii < nZplanes; ii++ )
  {
    width = CalculateWidth( origparamMother->Rmax[ii]
                          - origparamMother->Rmin[ii], fnDiv, foffset );
    origparam.Rmin[ii] = origparamMother->Rmin[ii]+foffset+width*copyNo;
    origparam.Rmax[ii] = origparamMother->Rmin[ii]+foffset+width*(copyNo+1);
  }
 
  pcone.SetOriginalParameters(&origparam);  // copy values & transfer pointers
  pcone.Reset();                            // reset to new solid parameters
 
#ifdef G4DIVDEBUG
  if( verbose >= -2 )
  {
    G4cout << "G4ParameterisationPolyconeRho::ComputeDimensions()" << G4endl
           << "-- Parametrised pcone copy-number: " << copyNo << G4endl;
    pcone.DumpInfo();
  }
#endif
}

ComputeTransformation()

void G4ParameterisationPolyconeRho::ComputeTransformation ( const G4int  copyNo, G4VPhysicalVolume *  physVol  ) const

virtual

Implements G4VDivisionParameterisation.

Definition at line 177 of file G4ParameterisationPolycone.cc.

{
  //----- translation 
  G4ThreeVector origin(0.,0.,0.); 
  //----- set translation 
  physVol->SetTranslation( origin );
 
  //----- calculate rotation matrix: unit
 
#ifdef G4DIVDEBUG
  if( verbose >= 2 )
  {
    G4cout << " G4ParameterisationPolyconeRho " << G4endl
           << " foffset: " << foffset
           << " - fwidth: " << fwidth << G4endl;
  }
#endif
 
  ChangeRotMatrix( physVol );
 
#ifdef G4DIVDEBUG
  if( verbose >= 2 )
  {
    G4cout << std::setprecision(8) << " G4ParameterisationPolyconeRho "
           << G4endl
           << " Position: " << origin/mm
           << " - Width: " << fwidth/deg
           << " - Axis: " << faxis  << G4endl;
  }
#endif
}

GetMaxParameter()

G4double G4ParameterisationPolyconeRho::GetMaxParameter ( ) const

virtual

Implements G4VDivisionParameterisation.

Definition at line 167 of file G4ParameterisationPolycone.cc.

{
  G4Polycone* msol = (G4Polycone*)(fmotherSolid);
  G4PolyconeHistorical* original_pars = msol->GetOriginalParameters();
  return original_pars->Rmax[0] - original_pars->Rmin[0];
}

---

The documentation for this class was generated from the following files:

• G4ParameterisationPolycone.hh
• G4ParameterisationPolycone.cc